From: Rob Herring <robh@kernel.org>
To: Jan Glauber <jglauber@cavium.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
David Daney <ddaney@caviumnetworks.com>,
"Steven J . Hill" <Steven.Hill@cavium.com>,
Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org
Subject: Re: [PATCH v10 8/8] dt-bindings: mmc: Add Cavium SOCs MMC bindings
Date: Thu, 22 Dec 2016 14:32:42 -0600 [thread overview]
Message-ID: <20161222203242.nxnmqyldtvdxkqhc@rob-hp-laptop> (raw)
In-Reply-To: <20161219121552.18316-9-jglauber@cavium.com>
On Mon, Dec 19, 2016 at 01:15:52PM +0100, Jan Glauber wrote:
> Add description of Cavium Octeon and ThunderX SOC device tree bindings.
>
> CC: Ulf Hansson <ulf.hansson@linaro.org>
> CC: Rob Herring <robh+dt@kernel.org>
> CC: Mark Rutland <mark.rutland@arm.com>
> CC: devicetree@vger.kernel.org
>
> Signed-off-by: Jan Glauber <jglauber@cavium.com>
> ---
> .../devicetree/bindings/mmc/octeon-mmc.txt | 59 ++++++++++++++++++++++
Perhaps cavium-mmc.txt would be more appropriate now.
> 1 file changed, 59 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mmc/octeon-mmc.txt
>
> diff --git a/Documentation/devicetree/bindings/mmc/octeon-mmc.txt b/Documentation/devicetree/bindings/mmc/octeon-mmc.txt
> new file mode 100644
> index 0000000..aad02eb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/octeon-mmc.txt
> @@ -0,0 +1,59 @@
> +* Cavium Octeon & ThunderX MMC controller
> +
> +The highspeed MMC host controller on Caviums SoCs provides an interface
> +for MMC and SD types of memory cards.
> +
> +Supported maximum speeds are the ones of the eMMC standard 4.41 as well
> +as the speed of SD standard 4.0. Only 3.3 Volt is supported.
> +
> +Required properties:
> + - compatible : should be one of:
> + * "cavium,octeon-6130-mmc"
> + * "cavium,octeon-6130-mmc-slot"
> + * "cavium,octeon-7890-mmc"
> + * "cavium,octeon-7890-mmc-slot"
> + * "cavium,thunder-8190-mmc"
> + * "cavium,thunder-8190-mmc-slot"
> + * "cavium,thunder-8390-mmc"
> + * "cavium,thunder-8390-mmc-slot"
> + - reg : mmc controller base registers
Following PCI addressing?
> + - clocks : phandle
> +
> +Optional properties:
> + - for cd, bus-width and additional generic mmc parameters
> + please refer to mmc.txt within this directory
> + - "cavium,cmd-clk-skew" : number of coprocessor clocks before sampling command
> + - "cavium,dat-clk-skew" : number of coprocessor clocks before sampling data
> +
> +Deprecated properties:
> +- spi-max-frequency : use max-frequency instead
> +- "cavium,bus-max-width" : use bus-width instead
Drop the quotes.
> +
> +Examples:
> + - Within .dtsi:
Don't show the division between files in the example.
> + mmc_1_4: mmc@1,4 {
> + compatible = "cavium,thunder-8390-mmc";
> + reg = <0x0c00 0 0 0 0>; /* DEVFN = 0x0c (1:4) */
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&sclk>;
> + };
> +
> + - Within dts:
> + mmc-slot@0 {
Need to show this is a child node.
> + compatible = "cavium,thunder-8390-mmc-slot";
> + reg = <0>;
> + voltage-ranges = <3300 3300>;
> + max-frequency = <42000000>;
> + bus-width = <4>;
> + cap-sd-highspeed;
> + };
> + mmc-slot@1 {
> + compatible = "cavium,thunder-8390-mmc-slot";
> + reg = <1>;
> + voltage-ranges = <3300 3300>;
> + max-frequency = <42000000>;
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + non-removable;
> + };
> --
> 2.9.0.rc0.21.g7777322
>
next prev parent reply other threads:[~2016-12-22 20:32 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-19 12:15 [PATCH v10 0/8] Cavium MMC driver Jan Glauber
2016-12-19 12:15 ` [PATCH v10 1/8] mmc: cavium: Add core MMC driver for Cavium SOCs Jan Glauber
2016-12-19 12:15 ` [PATCH v10 2/8] mmc: octeon: Add MMC platform driver for Octeon SOCs Jan Glauber
2016-12-19 12:15 ` [PATCH v10 3/8] mmc: octeon: Work-around hardware bug on cn6xxx and cnf7xxx Jan Glauber
2016-12-19 12:15 ` [PATCH v10 4/8] mmc: octeon: Add support for Octeon cn7890 Jan Glauber
2016-12-19 12:15 ` [PATCH v10 5/8] mmc: thunderx: Add MMC PCI driver for ThunderX SOCs Jan Glauber
2016-12-19 12:15 ` [PATCH v10 6/8] mmc: thunderx: Add scatter-gather DMA support Jan Glauber
2016-12-19 12:15 ` [PATCH v10 7/8] mmc: thunderx: Support DDR mode for eMMC devices Jan Glauber
2016-12-19 12:15 ` [PATCH v10 8/8] dt-bindings: mmc: Add Cavium SOCs MMC bindings Jan Glauber
2016-12-22 20:32 ` Rob Herring [this message]
2017-01-09 15:05 ` Jan Glauber
2016-12-20 12:10 ` [PATCH v10 0/8] Cavium MMC driver Ulf Hansson
2016-12-20 12:24 ` Jan Glauber
2016-12-20 12:38 ` Ulf Hansson
2017-01-19 14:50 ` Jan Glauber
2017-01-19 17:47 ` David Daney
2017-01-20 10:37 ` Jan Glauber
2017-01-19 21:38 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161222203242.nxnmqyldtvdxkqhc@rob-hp-laptop \
--to=robh@kernel.org \
--cc=Steven.Hill@cavium.com \
--cc=ddaney@caviumnetworks.com \
--cc=devicetree@vger.kernel.org \
--cc=jglauber@cavium.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).