From: Alexander Koch <mail@alexanderkoch.net>
To: linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Jiri Kosina <trivial@kernel.org>,
Alexander Koch <mail@alexanderkoch.net>
Subject: [RFC PATCH v2 3/4] hwmon: adc128d818: Trivial code style fixup
Date: Fri, 23 Dec 2016 23:12:04 +0100 [thread overview]
Message-ID: <20161223221205.8825-4-mail@alexanderkoch.net> (raw)
In-Reply-To: <20161223221205.8825-1-mail@alexanderkoch.net>
Replace sysfs symbolic file permissions, e.g. 'S_IRUGO', by octal
permissions. This fixes checkpatch.pl warnings.
Signed-off-by: Alexander Koch <mail@alexanderkoch.net>
---
drivers/hwmon/adc128d818.c | 99 ++++++++++++++++++----------------------------
1 file changed, 39 insertions(+), 60 deletions(-)
diff --git a/drivers/hwmon/adc128d818.c b/drivers/hwmon/adc128d818.c
index 8667f454ea11..cbb3bc5e5229 100644
--- a/drivers/hwmon/adc128d818.c
+++ b/drivers/hwmon/adc128d818.c
@@ -242,69 +242,48 @@ static ssize_t adc128_show_alarm(struct device *dev,
return sprintf(buf, "%u\n", !!(alarms & mask));
}
-static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO,
- adc128_show_in, NULL, 0, 0);
-static SENSOR_DEVICE_ATTR_2(in0_min, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 0, 1);
-static SENSOR_DEVICE_ATTR_2(in0_max, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 0, 2);
-
-static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO,
- adc128_show_in, NULL, 1, 0);
-static SENSOR_DEVICE_ATTR_2(in1_min, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 1, 1);
-static SENSOR_DEVICE_ATTR_2(in1_max, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 1, 2);
-
-static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO,
- adc128_show_in, NULL, 2, 0);
-static SENSOR_DEVICE_ATTR_2(in2_min, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 2, 1);
-static SENSOR_DEVICE_ATTR_2(in2_max, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 2, 2);
-
-static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO,
- adc128_show_in, NULL, 3, 0);
-static SENSOR_DEVICE_ATTR_2(in3_min, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 3, 1);
-static SENSOR_DEVICE_ATTR_2(in3_max, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 3, 2);
-
-static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO,
- adc128_show_in, NULL, 4, 0);
-static SENSOR_DEVICE_ATTR_2(in4_min, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 4, 1);
-static SENSOR_DEVICE_ATTR_2(in4_max, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 4, 2);
-
-static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO,
- adc128_show_in, NULL, 5, 0);
-static SENSOR_DEVICE_ATTR_2(in5_min, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 5, 1);
-static SENSOR_DEVICE_ATTR_2(in5_max, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 5, 2);
-
-static SENSOR_DEVICE_ATTR_2(in6_input, S_IRUGO,
- adc128_show_in, NULL, 6, 0);
-static SENSOR_DEVICE_ATTR_2(in6_min, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 6, 1);
-static SENSOR_DEVICE_ATTR_2(in6_max, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 6, 2);
-
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, adc128_show_temp, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+static SENSOR_DEVICE_ATTR_2(in0_input, 0444, adc128_show_in, NULL, 0, 0);
+static SENSOR_DEVICE_ATTR_2(in0_min, 0644, adc128_show_in, adc128_set_in, 0, 1);
+static SENSOR_DEVICE_ATTR_2(in0_max, 0644, adc128_show_in, adc128_set_in, 0, 2);
+
+static SENSOR_DEVICE_ATTR_2(in1_input, 0444, adc128_show_in, NULL, 1, 0);
+static SENSOR_DEVICE_ATTR_2(in1_min, 0644, adc128_show_in, adc128_set_in, 1, 1);
+static SENSOR_DEVICE_ATTR_2(in1_max, 0644, adc128_show_in, adc128_set_in, 1, 2);
+
+static SENSOR_DEVICE_ATTR_2(in2_input, 0444, adc128_show_in, NULL, 2, 0);
+static SENSOR_DEVICE_ATTR_2(in2_min, 0644, adc128_show_in, adc128_set_in, 2, 1);
+static SENSOR_DEVICE_ATTR_2(in2_max, 0644, adc128_show_in, adc128_set_in, 2, 2);
+
+static SENSOR_DEVICE_ATTR_2(in3_input, 0444, adc128_show_in, NULL, 3, 0);
+static SENSOR_DEVICE_ATTR_2(in3_min, 0644, adc128_show_in, adc128_set_in, 3, 1);
+static SENSOR_DEVICE_ATTR_2(in3_max, 0644, adc128_show_in, adc128_set_in, 3, 2);
+
+static SENSOR_DEVICE_ATTR_2(in4_input, 0444, adc128_show_in, NULL, 4, 0);
+static SENSOR_DEVICE_ATTR_2(in4_min, 0644, adc128_show_in, adc128_set_in, 4, 1);
+static SENSOR_DEVICE_ATTR_2(in4_max, 0644, adc128_show_in, adc128_set_in, 4, 2);
+
+static SENSOR_DEVICE_ATTR_2(in5_input, 0444, adc128_show_in, NULL, 5, 0);
+static SENSOR_DEVICE_ATTR_2(in5_min, 0644, adc128_show_in, adc128_set_in, 5, 1);
+static SENSOR_DEVICE_ATTR_2(in5_max, 0644, adc128_show_in, adc128_set_in, 5, 2);
+
+static SENSOR_DEVICE_ATTR_2(in6_input, 0444, adc128_show_in, NULL, 6, 0);
+static SENSOR_DEVICE_ATTR_2(in6_min, 0644, adc128_show_in, adc128_set_in, 6, 1);
+static SENSOR_DEVICE_ATTR_2(in6_max, 0644, adc128_show_in, adc128_set_in, 6, 2);
+
+static SENSOR_DEVICE_ATTR(temp1_input, 0444, adc128_show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max, 0644,
adc128_show_temp, adc128_set_temp, 1);
-static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
+static SENSOR_DEVICE_ATTR(temp1_max_hyst, 0644,
adc128_show_temp, adc128_set_temp, 2);
-static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, adc128_show_alarm, NULL, 0);
-static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, adc128_show_alarm, NULL, 1);
-static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, adc128_show_alarm, NULL, 2);
-static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, adc128_show_alarm, NULL, 3);
-static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, adc128_show_alarm, NULL, 4);
-static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, adc128_show_alarm, NULL, 5);
-static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, adc128_show_alarm, NULL, 6);
-static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, adc128_show_alarm, NULL, 7);
+static SENSOR_DEVICE_ATTR(in0_alarm, 0444, adc128_show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(in1_alarm, 0444, adc128_show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(in2_alarm, 0444, adc128_show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(in3_alarm, 0444, adc128_show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(in4_alarm, 0444, adc128_show_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(in5_alarm, 0444, adc128_show_alarm, NULL, 5);
+static SENSOR_DEVICE_ATTR(in6_alarm, 0444, adc128_show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, 0444, adc128_show_alarm, NULL, 7);
static struct attribute *adc128_attrs[] = {
&sensor_dev_attr_in0_min.dev_attr.attr,
--
2.11.0
next prev parent reply other threads:[~2016-12-23 22:13 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-23 22:12 [RFC PATCH v2 0/4] hwmon: adc128d818: Support missing operation modes Alexander Koch
2016-12-23 22:12 ` [RFC PATCH v2 1/4] devicetree: hwmon: Add bindings for ADC128D818 Alexander Koch
2017-01-03 15:28 ` Rob Herring
2016-12-23 22:12 ` [RFC PATCH v2 2/4] hwmon: adc128d818: Implement mode selection via dt Alexander Koch
2016-12-23 22:12 ` Alexander Koch [this message]
2016-12-26 10:47 ` [RFC PATCH v2 3/4] hwmon: adc128d818: Trivial code style fixup Guenter Roeck
2016-12-29 18:22 ` Alexander Koch
2016-12-29 19:46 ` Guenter Roeck
2016-12-29 20:30 ` Alexander Koch
2016-12-30 0:55 ` Guenter Roeck
2016-12-23 22:12 ` [RFC PATCH v2 4/4] hwmon: adc128d818: Support operation modes 1-3 Alexander Koch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161223221205.8825-4-mail@alexanderkoch.net \
--to=mail@alexanderkoch.net \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=trivial@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).