From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751997AbcL1VXJ (ORCPT ); Wed, 28 Dec 2016 16:23:09 -0500 Received: from metis.ext.4.pengutronix.de ([92.198.50.35]:59063 "EHLO metis.ext.4.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751122AbcL1VXI (ORCPT ); Wed, 28 Dec 2016 16:23:08 -0500 Date: Wed, 28 Dec 2016 22:21:39 +0100 From: Uwe =?iso-8859-1?Q?Kleine-K=F6nig?= To: "M'boumba Cedric Madianga" Cc: Wolfram Sang , Rob Herring , Maxime Coquelin , Alexandre Torgue , Linus Walleij , Patrice Chotard , linux@armlinux.org.uk, linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v7 2/5] i2c: Add STM32F4 I2C driver Message-ID: <20161228212139.adkixdgvmtj2ukjs@pengutronix.de> References: <1482413704-17531-1-git-send-email-cedric.madianga@gmail.com> <1482413704-17531-3-git-send-email-cedric.madianga@gmail.com> <20161223090019.a3jkhpb3abgjqi55@pengutronix.de> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: User-Agent: Mutt/1.6.2-neo (2016-06-11) X-SA-Exim-Connect-IP: 2001:67c:670:100:1d::c5 X-SA-Exim-Mail-From: ukl@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-kernel@vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hello Cedric, On Fri, Dec 23, 2016 at 01:41:15PM +0100, M'boumba Cedric Madianga wrote: > > I don't understand why DUTY is required to reach 400 kHz. Given a parent > > freq of 30 MHz, with CCR = 25 and DUTY = 0 we have: > > > > t_high = 25 * 33.333 ns = 833.333 ns > > t_low = 2 * 25 * 33.333 ns = 1666.667 ns > > > > then t_high and t_low satisfy the i2c bus specification > > (t_low > 1300 ns, t_high > 600 ns) and we have t_low + t_high = 2500 ns > > = 1 / 400 kHz. > > > > Where is the error? > Hum ok you are right. I was a bad interpretation of the datasheet. > So now it is clearer. Thanks for that. > I will correct and improve my comments in the V8. The benefit of DUTY=1 is (I think) that you can reach 400 kHz also with lower parent frequencies. And so it't probably sensible to make use of it unconditionally for fast mode. > >> + * So, in order to cover both SCL high/low with Duty = 1, > >> + * CCR = 16 * SCL period * I2C CLK frequency > > > > I don't get that. Actually you need to use low + high, so > > CCR = parentrate / (25 * 400 kHz), right? > With your new inputs above, I think I could use a simpler implementation: > CCR = scl_high_period * parent_rate > with scl_high_period = 5 µs in standard mode to reach 100khz > and scl_high_period = 1 µs in fast mode to reach 400khz with 1/2 or > 16/9 duty cycle. > So, I am wondering if I have to let the customer setting the duty > cycle in the DT for example with "st,duty=0" or "st,duty=1" property > (0 for 1/2 and 1 for 16/9). > Or perhaps the best option it to use a default value. What is your > feeling regarding this point ? No, don't add a property to the device tree. Just take pencil and paper and think a while about the right algorithm to choose the right register settings. > >> + cr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR2); > >> + freq = cr2 & STM32F4_I2C_CR2_FREQ_MASK; > >> + > >> + if (i2c_dev->speed == STM32F4_I2C_SPEED_STANDARD) > >> + trise = freq + 1; > >> + else > >> + trise = freq * 300 / 1000 + 1; > > > > if freq is big such that freq * 300 overflows does this result in a > > wrong result, or does the compiler optimize correctly? > For sure the compiler will never exceeds u32 max value If I compile -------->8-------- #include void myfunc(unsigned freq) { unsigned trise = freq * 300 / 1000 + 1; printf("trise = %u", trise); } -------->8-------- for arm with -O3 I get: 00000000 : 0: e3a01f4b mov r1, #300 ; 0x12c 4: e0010190 mul r1, r0, r1 8: e59f3010 ldr r3, [pc, #16] ; 20 c: e59f0010 ldr r0, [pc, #16] ; 24 10: e0812193 umull r2, r1, r3, r1 14: e1a01321 lsr r1, r1, #6 18: e2811001 add r1, r1, #1 1c: eafffffe b 0 20: 10624dd3 .word 0x10624dd3 24: 00000000 .word 0x00000000 The mul instruction at offset 4 writes the least significant 32 bits of 300 * r0 to r1 and so doesn't handle overflow correctly. > > This is still not really understandable. > I have already added some comments from datasheet to explain the > different cases. > I don't see how I could be more understandable as it is clearly the > hardware way of working... You need to comment the check for the length, something like: /* * To end the transfer correctly the foo bit has to be cleared * already on the last but one byte to be transferred. */ and bonus points if you can shrink the number of functions that check for this stuff. > > Just do: > > > > if (status & STM32F4_I2C_SR1_SB) { > > ... > > } > > > > if (status & ...) { > > > > } > ok but I would prefer something like that: > flag = status & possible_status > if (flag & STM32F4_I2C_SR1_SB) { > ... > } > > if (flag & ...) { > } Ok, if you really need possible_status. > > Then it's obvious by reading the code in which order they are handled > > without the need to check the definitions. Do you really need to jugle > > with possible_status? > I think I have to use possible_status as some events could occur > whereas the corresponding interrupt is disabled. > For example, for a 2 byte-reception, we don't have to take into accout > RXNE event so the corresponding interrupt is disabled. Is it possible to make it more obvious by doing: status = read_from_status_register() & read_from_interrupt_enable_register(); at a single place? > >> + /* Use __fls() to check error bits first */ > >> + flag = __fls(status & possible_status); > >> + > >> + switch (1 << flag) { > >> + case STM32F4_I2C_SR1_BERR: > >> + reg = i2c_dev->base + STM32F4_I2C_SR1; > >> + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_SR1_BERR); > >> + msg->result = -EIO; > >> + break; > >> + > >> + case STM32F4_I2C_SR1_ARLO: > >> + reg = i2c_dev->base + STM32F4_I2C_SR1; > >> + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_SR1_ARLO); > >> + msg->result = -EAGAIN; > >> + break; > >> + > >> + case STM32F4_I2C_SR1_AF: > >> + reg = i2c_dev->base + STM32F4_I2C_CR1; > >> + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_STOP); > >> + msg->result = -EIO; > >> + break; > >> + > >> + default: > >> + dev_err(i2c_dev->dev, > >> + "err it unhandled: status=0x%08x)\n", status); > >> + return IRQ_NONE; > >> + } > > > > You only check a single irq flag here. > Yes only the first error could be reported to the i2c clients via > msg->result that's why I don't check all errors. > Moreover, as soon as an error occurs, the I2C device is reset. The the "first" in the comment for __fls is misleading. Also do: if (status & MOST_IMPORTANT_ERROR) { ... } if (status & SECOND_MOST_IMPORTANT_ERROR) { ... } (if you need including possible_status stuff). Best regards Uwe -- Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | http://www.pengutronix.de/ |