From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752094AbcL1VxB (ORCPT ); Wed, 28 Dec 2016 16:53:01 -0500 Received: from youngberry.canonical.com ([91.189.89.112]:36762 "EHLO youngberry.canonical.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751882AbcL1VxA (ORCPT ); Wed, 28 Dec 2016 16:53:00 -0500 From: Colin King To: Jean Delvare , Guenter Roeck , Jonathan Corbet , linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Subject: [PATCH] Documentation: fix spelling mistakes of "Celcius" -- > "Celsius" Date: Wed, 28 Dec 2016 21:51:37 +0000 Message-Id: <20161228215137.7675-1-colin.king@canonical.com> X-Mailer: git-send-email 2.10.2 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Colin Ian King Signed-off-by: Colin Ian King --- Documentation/hwmon/ds1621 | 8 ++++---- Documentation/thermal/nouveau_thermal | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/hwmon/ds1621 b/Documentation/hwmon/ds1621 index f775e61..fa34079 100644 --- a/Documentation/hwmon/ds1621 +++ b/Documentation/hwmon/ds1621 @@ -117,10 +117,10 @@ support, which is achieved via the R0 and R1 config register bits, where: R0..R1 ------ - 0 0 => 9 bits, 0.5 degrees Celcius - 1 0 => 10 bits, 0.25 degrees Celcius - 0 1 => 11 bits, 0.125 degrees Celcius - 1 1 => 12 bits, 0.0625 degrees Celcius + 0 0 => 9 bits, 0.5 degrees Celsius + 1 0 => 10 bits, 0.25 degrees Celsius + 0 1 => 11 bits, 0.125 degrees Celsius + 1 1 => 12 bits, 0.0625 degrees Celsius Note: At initial device power-on, the default resolution is set to 12-bits. diff --git a/Documentation/thermal/nouveau_thermal b/Documentation/thermal/nouveau_thermal index 60bc293..6e17a11 100644 --- a/Documentation/thermal/nouveau_thermal +++ b/Documentation/thermal/nouveau_thermal @@ -42,7 +42,7 @@ thresholds can be configured thanks to the following HWMON attributes: * Critical: temp1_crit and temp1_crit_hyst; * Shutdown: temp1_emergency and temp1_emergency_hyst. -NOTE: Remember that the values are stored as milli degrees Celcius. Don't forget +NOTE: Remember that the values are stored as milli degrees Celsius. Don't forget to multiply! Fan management -- 2.10.2