From: Florian Fainelli <f.fainelli@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: andrew@lunn.ch, vivien.didelot@savoirfairelinux.com,
adi-buildroot-devel@lists.sourceforge.net, realmz6@gmail.com,
Florian Fainelli <f.fainelli@gmail.com>
Subject: [PATCH 2/2] blackfin: ezbrd: Remove non-functional DSA/KSZ8893M code
Date: Sun, 1 Jan 2017 14:42:26 -0800 [thread overview]
Message-ID: <20170101224227.20812-3-f.fainelli@gmail.com> (raw)
In-Reply-To: <20170101224227.20812-1-f.fainelli@gmail.com>
There is no in tree driver for the KSZ8893M switch driver, so just get rid of
the code in that board file.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/blackfin/mach-bf518/boards/ezbrd.c | 47 ---------------------------------
1 file changed, 47 deletions(-)
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index d022112927c2..c51d1b810ac3 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -25,7 +25,6 @@
#include <asm/dpmc.h>
#include <asm/bfin_sdh.h>
#include <linux/spi/ad7877.h>
-#include <net/dsa.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -105,11 +104,7 @@ static const unsigned short bfin_mac_peripherals[] = {
static struct bfin_phydev_platform_data bfin_phydev_data[] = {
{
-#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
- .addr = 3,
-#else
.addr = 1,
-#endif
.irq = IRQ_MAC_PHYINT,
},
};
@@ -119,9 +114,6 @@ static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
.phydev_data = bfin_phydev_data,
.phy_mode = PHY_INTERFACE_MODE_MII,
.mac_peripherals = bfin_mac_peripherals,
-#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
- .phy_mask = 0xfff7, /* Only probe the port phy connect to the on chip MAC */
-#endif
.vlan1_mask = 1,
.vlan2_mask = 2,
};
@@ -140,29 +132,6 @@ static struct platform_device bfin_mac_device = {
}
};
-#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
-static struct dsa_chip_data ksz8893m_switch_chip_data = {
- .mii_bus = &bfin_mii_bus.dev,
- .port_names = {
- NULL,
- "eth%d",
- "eth%d",
- "cpu",
- },
-};
-static struct dsa_platform_data ksz8893m_switch_data = {
- .nr_chips = 1,
- .netdev = &bfin_mac_device.dev,
- .chip = &ksz8893m_switch_chip_data,
-};
-
-static struct platform_device ksz8893m_switch_device = {
- .name = "dsa",
- .id = 0,
- .num_resources = 0,
- .dev.platform_data = &ksz8893m_switch_data,
-};
-#endif
#endif
#if IS_ENABLED(CONFIG_MTD_M25P80)
@@ -228,19 +197,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if IS_ENABLED(CONFIG_BFIN_MAC)
-#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
- {
- .modalias = "ksz8893m",
- .max_speed_hz = 5000000,
- .bus_num = 0,
- .chip_select = 1,
- .platform_data = NULL,
- .mode = SPI_MODE_3,
- },
-#endif
-#endif
-
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
@@ -714,9 +670,6 @@ static struct platform_device *stamp_devices[] __initdata = {
#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
-#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
- &ksz8893m_switch_device,
-#endif
#endif
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
--
2.9.3
next prev parent reply other threads:[~2017-01-01 22:42 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-01 22:42 [PATCH 0/2] blackfin: Remove dead DSA code Florian Fainelli
2017-01-01 22:42 ` [PATCH 1/2] blackfin: tcm-bf518: Remove dsa.h inclusion Florian Fainelli
2017-01-01 22:42 ` Florian Fainelli [this message]
2017-01-29 3:15 ` [PATCH 0/2] blackfin: Remove dead DSA code Florian Fainelli
2017-05-28 23:59 ` Florian Fainelli
2017-05-30 0:45 ` Adam Borowski
2017-07-16 15:59 ` Florian Fainelli
2017-07-16 16:00 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170101224227.20812-3-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=adi-buildroot-devel@lists.sourceforge.net \
--cc=andrew@lunn.ch \
--cc=linux-kernel@vger.kernel.org \
--cc=realmz6@gmail.com \
--cc=vivien.didelot@savoirfairelinux.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).