* [PATCH] net: dec: uli526x: use new api ethtool_{get|set}_link_ksettings
@ 2017-01-01 18:11 Philippe Reynes
2017-01-03 0:31 ` David Miller
0 siblings, 1 reply; 2+ messages in thread
From: Philippe Reynes @ 2017-01-01 18:11 UTC (permalink / raw)
To: davem, mugunthanvnm, a, fw, jarod
Cc: netdev, linux-parisc, linux-kernel, Philippe Reynes
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
drivers/net/ethernet/dec/tulip/uli526x.c | 41 +++++++++++++++++------------
1 files changed, 24 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/dec/tulip/uli526x.c b/drivers/net/ethernet/dec/tulip/uli526x.c
index f82ebe5..8d98b259 100644
--- a/drivers/net/ethernet/dec/tulip/uli526x.c
+++ b/drivers/net/ethernet/dec/tulip/uli526x.c
@@ -926,48 +926,53 @@ static void uli526x_set_filter_mode(struct net_device * dev)
}
static void
-ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd)
+ULi_ethtool_get_link_ksettings(struct uli526x_board_info *db,
+ struct ethtool_link_ksettings *cmd)
{
- ecmd->supported = (SUPPORTED_10baseT_Half |
+ u32 supported, advertising;
+
+ supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_Autoneg |
SUPPORTED_MII);
- ecmd->advertising = (ADVERTISED_10baseT_Half |
+ advertising = (ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full |
ADVERTISED_Autoneg |
ADVERTISED_MII);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
- ecmd->port = PORT_MII;
- ecmd->phy_address = db->phy_addr;
-
- ecmd->transceiver = XCVR_EXTERNAL;
+ cmd->base.port = PORT_MII;
+ cmd->base.phy_address = db->phy_addr;
- ethtool_cmd_speed_set(ecmd, SPEED_10);
- ecmd->duplex = DUPLEX_HALF;
+ cmd->base.speed = SPEED_10;
+ cmd->base.duplex = DUPLEX_HALF;
if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
{
- ethtool_cmd_speed_set(ecmd, SPEED_100);
+ cmd->base.speed = SPEED_100;
}
if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
{
- ecmd->duplex = DUPLEX_FULL;
+ cmd->base.duplex = DUPLEX_FULL;
}
if(db->link_failed)
{
- ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
- ecmd->duplex = DUPLEX_UNKNOWN;
+ cmd->base.speed = SPEED_UNKNOWN;
+ cmd->base.duplex = DUPLEX_UNKNOWN;
}
if (db->media_mode & ULI526X_AUTO)
{
- ecmd->autoneg = AUTONEG_ENABLE;
+ cmd->base.autoneg = AUTONEG_ENABLE;
}
}
@@ -981,10 +986,12 @@ static void netdev_get_drvinfo(struct net_device *dev,
strlcpy(info->bus_info, pci_name(np->pdev), sizeof(info->bus_info));
}
-static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) {
+static int netdev_get_link_ksettings(struct net_device *dev,
+ struct ethtool_link_ksettings *cmd)
+{
struct uli526x_board_info *np = netdev_priv(dev);
- ULi_ethtool_gset(np, cmd);
+ ULi_ethtool_get_link_ksettings(np, cmd);
return 0;
}
@@ -1006,9 +1013,9 @@ static void uli526x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
static const struct ethtool_ops netdev_ethtool_ops = {
.get_drvinfo = netdev_get_drvinfo,
- .get_settings = netdev_get_settings,
.get_link = netdev_get_link,
.get_wol = uli526x_get_wol,
+ .get_link_ksettings = netdev_get_link_ksettings,
};
/*
--
1.7.4.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] net: dec: uli526x: use new api ethtool_{get|set}_link_ksettings
2017-01-01 18:11 [PATCH] net: dec: uli526x: use new api ethtool_{get|set}_link_ksettings Philippe Reynes
@ 2017-01-03 0:31 ` David Miller
0 siblings, 0 replies; 2+ messages in thread
From: David Miller @ 2017-01-03 0:31 UTC (permalink / raw)
To: tremyfr; +Cc: mugunthanvnm, a, fw, jarod, netdev, linux-parisc, linux-kernel
From: Philippe Reynes <tremyfr@gmail.com>
Date: Sun, 1 Jan 2017 19:11:06 +0100
> The ethtool api {get|set}_settings is deprecated.
> We move this driver to new api {get|set}_link_ksettings.
>
> Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Applied.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-01-03 0:31 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-01-01 18:11 [PATCH] net: dec: uli526x: use new api ethtool_{get|set}_link_ksettings Philippe Reynes
2017-01-03 0:31 ` David Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).