[PATCH v2 0/8] ARM: dts: Switch to new DSA binding

[PATCH v2 0/8] ARM: dts: Switch to new DSA binding

[Florian Fainelli]

Hi all,

This patch series converts the in-tree users to utilize the new (relatively)
DSA binding that was introduced with commit 8c5ad1d6179d ("net: dsa: Document
new binding"). The legacy binding node is kept included, but is marked
disabled.

Changes in v2:

- patch 1: Use an hexadecimal reg property
- patch 2: fixed the subject
- patch 3: s/okay/disabled/ for the legacy DSA node
- patches 7/8: fixed a stray whitespace

In about 2-3 releases we may consider removing the old DSA binding entirely
from the kernel.

Thank you!

Florian Fainelli (8):
  ARM: dts: armada-370-rd: Utilize new DSA binding
  ARM: dts: armada-385-linksys: Utilize new DSA binding
  ARM: dts: armada-388-clearfog: Utilize new DSA binding
  ARM: dts: armada-xp-linksys-mamba: Utilize new DSA binding
  ARM: dts: kirkwood-dir665: Utilize new DSA binding
  ARM: dts: kirkwood-linksys-viper: Utilize new DSA binding
  ARM: dts: kirkwood-mv88f6281gtw-ge: Utilize new DSA binding
  ARM: dts: kirkwood-rd88f6281: Utilize new DSA binding

 arch/arm/boot/dts/armada-370-rd.dts            | 44 +++++++++++++++++
 arch/arm/boot/dts/armada-385-linksys.dtsi      | 52 ++++++++++++++++++++-
 arch/arm/boot/dts/armada-388-clearfog.dts      | 65 ++++++++++++++++++++++++++
 arch/arm/boot/dts/armada-xp-linksys-mamba.dts  | 53 +++++++++++++++++++++
 arch/arm/boot/dts/kirkwood-dir665.dts          | 49 +++++++++++++++++++
 arch/arm/boot/dts/kirkwood-linksys-viper.dts   | 49 +++++++++++++++++++
 arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 49 +++++++++++++++++++
 arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts    | 11 +++++
 arch/arm/boot/dts/kirkwood-rd88f6281.dtsi      | 44 +++++++++++++++++
 9 files changed, 415 insertions(+), 1 deletion(-)

-- 
2.9.3

[PATCH v2 1/8] ARM: dts: armada-370-rd: Utilize new DSA binding

[Florian Fainelli]

Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: dsa:
Document new binding"). The legacy binding node is kept included, but is marked
disabled.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/boot/dts/armada-370-rd.dts | 44 +++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index c3fd6e49212f..ade956cbd41a 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -173,6 +173,8 @@
 	};
 
 	dsa {
+		status = "disabled";
+
 		compatible = "marvell,dsa";
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -235,6 +237,48 @@
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 	};
+
+	switch: switch@10 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan0";
+			};
+
+			port@1 {
+			       reg = <1>;
+			       label = "lan1";
+			};
+
+			port@2 {
+			       reg = <2>;
+			       label = "lan2";
+			};
+
+			port@3 {
+			       reg = <3>;
+			       label = "lan3";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth1>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
 };
 
 
-- 
2.9.3

[PATCH v2 2/8] ARM: dts: armada-385-linksys: Utilize new DSA binding

[Florian Fainelli]

Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: dsa:
Document new binding"). The legacy binding node is kept included, but is marked
disabled.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/boot/dts/armada-385-linksys.dtsi | 52 ++++++++++++++++++++++++++++++-
 1 file changed, 51 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index 8f0e508f64ae..20d5e8b00f2d 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -103,8 +103,56 @@
 				};
 			};
 
-			mdio {
+			mdio@72004 {
 				status = "okay";
+
+				switch@0 {
+					compatible = "marvell,mv88e6095";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+							label = "lan4";
+						};
+
+						port@1 {
+							reg = <1>;
+							label = "lan3";
+						};
+
+						port@2 {
+							reg = <2>;
+							label = "lan2";
+						};
+
+						port@3 {
+							reg = <3>;
+							label = "lan1";
+						};
+
+						port@4 {
+							reg = <4>;
+							label = "wan";
+						};
+
+						port@5 {
+							reg = <5>;
+							label = "cpu";
+							ethernet = <&eth2>;
+
+							fixed-link {
+								speed = <1000>;
+								full-duplex;
+							};
+						};
+					};
+				};
 			};
 
 			sata@a8000 {
@@ -261,6 +309,8 @@
 	};
 
 	dsa@0 {
+		status = "disabled";
+
 		compatible = "marvell,dsa";
 		#address-cells = <2>;
 		#size-cells = <0>;
-- 
2.9.3

[PATCH v2 3/8] ARM: dts: armada-388-clearfog: Utilize new DSA binding

[Florian Fainelli]

Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net:
dsa: Document new binding"). The legacy binding node is kept included, but is
marked disabled.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/boot/dts/armada-388-clearfog.dts | 65 +++++++++++++++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
index 71ce201c903e..40ec6d768669 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -351,6 +351,8 @@
 	};
 
 	dsa@0 {
+		status = "disabled";
+
 		compatible = "marvell,dsa";
 		dsa,ethernet = <&eth1>;
 		dsa,mii-bus = <&mdio>;
@@ -444,3 +446,66 @@
 		status = "disabled";
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	switch@4 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <4>;
+		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
+		pinctrl-names = "default";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan1";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth1>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@6 {
+				/* 88E1512 external phy */
+				reg = <6>;
+				label = "lan6";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
-- 
2.9.3

[PATCH v2 4/8] ARM: dts: armada-xp-linksys-mamba: Utilize new DSA binding

[Florian Fainelli]

Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: dsa:
Document new binding"). The legacy binding node is kept included, but is marked
disabled.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 53 +++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 83ac884c0f8a..42ea8764814c 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -302,6 +302,8 @@
 	};
 
 	dsa {
+		status = "disabled";
+
 		compatible = "marvell,dsa";
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -398,3 +400,54 @@
 		spi-max-frequency = <40000000>;
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan4";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan3";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan1";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "internet";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
-- 
2.9.3

[PATCH v2 5/8] ARM: dts: kirkwood-dir665: Utilize new DSA binding

[Florian Fainelli]

Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: dsa:
Document new binding"). The legacy binding node is kept included, but is marked
disabled.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/boot/dts/kirkwood-dir665.dts | 49 +++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
index 41acbb6dd6ab..4d2b15d6244a 100644
--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -194,6 +194,8 @@
 	};
 
 	dsa {
+		status = "disabled";
+
 		compatible = "marvell,dsa";
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -241,6 +243,53 @@
 
 &mdio {
 	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan4";
+			};
+
+			port@1 {
+			       reg = <1>;
+			       label = "lan3";
+			};
+
+			port@2 {
+			       reg = <2>;
+			       label = "lan2";
+			};
+
+			port@3 {
+			       reg = <3>;
+			       label = "lan1";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&eth0port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
 };
 
 /* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
-- 
2.9.3

[PATCH v2 6/8] ARM: dts: kirkwood-linksys-viper: Utilize new DSA binding

[Florian Fainelli]

Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: dsa:
Document new binding"). The legacy binding node is kept included, but is marked
disabled.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/boot/dts/kirkwood-linksys-viper.dts | 49 ++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
index 345fcac48dc7..df7851820507 100644
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
@@ -70,6 +70,8 @@
 	};
 
 	dsa {
+		status = "disabled";
+
 		compatible = "marvell,dsa";
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -207,6 +209,53 @@
 
 &mdio {
 	status = "okay";
+
+	switch@10 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <16>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "ethernet1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "ethernet2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "ethernet3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "ethernet4";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "internet";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth0port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
 };
 
 &uart0 {
-- 
2.9.3

[PATCH v2 7/8] ARM: dts: kirkwood-mv88f6281gtw-ge: Utilize new DSA binding

[Florian Fainelli]

Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: dsa:
Document new binding"). The legacy binding node is kept included, but is marked
disabled.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 49 ++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index 172a38c0b8a9..327023a477b8 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -112,6 +112,8 @@
 	};
 
 	dsa {
+		status = "disabled";
+
 		compatible = "marvell,dsa";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -159,6 +161,53 @@
 
 &mdio {
 	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth0port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
 };
 
 &eth0 {
-- 
2.9.3

[PATCH v2 8/8] ARM: dts: kirkwood-rd88f6281: Utilize new DSA binding

[Florian Fainelli]

Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: dsa:
Document new binding"). The legacy binding node is kept included, but is marked
disabled.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts | 11 ++++++++
 arch/arm/boot/dts/kirkwood-rd88f6281.dtsi   | 44 +++++++++++++++++++++++++++++
 2 files changed, 55 insertions(+)

diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
index 1a797381d3d4..6a4a65ec7944 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
@@ -33,3 +33,14 @@
 &eth1 {
       status = "disabled";
 };
+
+&switch {
+	reg = <0>;
+
+	ports {
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
index d5aacf137e40..91f5da5dae5f 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
@@ -54,6 +54,8 @@
 	};
 
 	dsa {
+		status = "disabled";
+
 		compatible = "marvell,dsa";
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -115,6 +117,48 @@
 
 &mdio {
 	status = "okay";
+
+	switch: switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth0port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+		};
+	};
 };
 
 &eth0 {
-- 
2.9.3

Re: [PATCH v2 3/8] ARM: dts: armada-388-clearfog: Utilize new DSA binding

[Russell King - ARM Linux]

On Thu, Jan 05, 2017 at 11:29:52AM -0800, Florian Fainelli wrote:
> Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net:
> dsa: Document new binding"). The legacy binding node is kept included, but is
> marked disabled.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Booted here on clearfog, and tested traffic passes between two lan
ports, and a lan port and the cpu port... and generally still seems
to work as a switch.  All seems well on the face of it.

Acked-by: Russell King <rmk+kernel@armlinux.org.uk>

Thanks.

> ---
>  arch/arm/boot/dts/armada-388-clearfog.dts | 65 +++++++++++++++++++++++++++++++
>  1 file changed, 65 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
> index 71ce201c903e..40ec6d768669 100644
> --- a/arch/arm/boot/dts/armada-388-clearfog.dts
> +++ b/arch/arm/boot/dts/armada-388-clearfog.dts
> @@ -351,6 +351,8 @@
>  	};
>  
>  	dsa@0 {
> +		status = "disabled";
> +
>  		compatible = "marvell,dsa";
>  		dsa,ethernet = <&eth1>;
>  		dsa,mii-bus = <&mdio>;
> @@ -444,3 +446,66 @@
>  		status = "disabled";
>  	};
>  };
> +
> +&mdio {
> +	status = "okay";
> +
> +	switch@4 {
> +		compatible = "marvell,mv88e6085";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		reg = <4>;
> +		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
> +		pinctrl-names = "default";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				label = "lan5";
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +				label = "lan4";
> +			};
> +
> +			port@2 {
> +				reg = <2>;
> +				label = "lan3";
> +			};
> +
> +			port@3 {
> +				reg = <3>;
> +				label = "lan2";
> +			};
> +
> +			port@4 {
> +				reg = <4>;
> +				label = "lan1";
> +			};
> +
> +			port@5 {
> +				reg = <5>;
> +				label = "cpu";
> +				ethernet = <&eth1>;
> +				fixed-link {
> +					speed = <1000>;
> +					full-duplex;
> +				};
> +			};
> +
> +			port@6 {
> +				/* 88E1512 external phy */
> +				reg = <6>;
> +				label = "lan6";
> +				fixed-link {
> +					speed = <1000>;
> +					full-duplex;
> +				};
> +			};
> +		};
> +	};
> +};
> -- 
> 2.9.3
> 

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

Re: [PATCH v2 0/8] ARM: dts: Switch to new DSA binding

[Florian Fainelli]

On 01/05/2017 11:29 AM, Florian Fainelli wrote:
> Hi all,
> 
> This patch series converts the in-tree users to utilize the new (relatively)
> DSA binding that was introduced with commit 8c5ad1d6179d ("net: dsa: Document
> new binding"). The legacy binding node is kept included, but is marked
> disabled.
> 
> Changes in v2:
> 
> - patch 1: Use an hexadecimal reg property
> - patch 2: fixed the subject
> - patch 3: s/okay/disabled/ for the legacy DSA node
> - patches 7/8: fixed a stray whitespace
> 
> In about 2-3 releases we may consider removing the old DSA binding entirely
> from the kernel.

Gregory, are you going to take this for 4.11? Thanks

> 
> Thank you!
> 
> Florian Fainelli (8):
>   ARM: dts: armada-370-rd: Utilize new DSA binding
>   ARM: dts: armada-385-linksys: Utilize new DSA binding
>   ARM: dts: armada-388-clearfog: Utilize new DSA binding
>   ARM: dts: armada-xp-linksys-mamba: Utilize new DSA binding
>   ARM: dts: kirkwood-dir665: Utilize new DSA binding
>   ARM: dts: kirkwood-linksys-viper: Utilize new DSA binding
>   ARM: dts: kirkwood-mv88f6281gtw-ge: Utilize new DSA binding
>   ARM: dts: kirkwood-rd88f6281: Utilize new DSA binding
> 
>  arch/arm/boot/dts/armada-370-rd.dts            | 44 +++++++++++++++++
>  arch/arm/boot/dts/armada-385-linksys.dtsi      | 52 ++++++++++++++++++++-
>  arch/arm/boot/dts/armada-388-clearfog.dts      | 65 ++++++++++++++++++++++++++
>  arch/arm/boot/dts/armada-xp-linksys-mamba.dts  | 53 +++++++++++++++++++++
>  arch/arm/boot/dts/kirkwood-dir665.dts          | 49 +++++++++++++++++++
>  arch/arm/boot/dts/kirkwood-linksys-viper.dts   | 49 +++++++++++++++++++
>  arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 49 +++++++++++++++++++
>  arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts    | 11 +++++
>  arch/arm/boot/dts/kirkwood-rd88f6281.dtsi      | 44 +++++++++++++++++
>  9 files changed, 415 insertions(+), 1 deletion(-)
> 


-- 
Florian

Re: [PATCH v2 0/8] ARM: dts: Switch to new DSA binding

[Gregory CLEMENT]

Hi Florian,
 
 On mar., janv. 17 2017, Florian Fainelli <f.fainelli@gmail.com> wrote:

> On 01/05/2017 11:29 AM, Florian Fainelli wrote:
>> Hi all,
>> 
>> This patch series converts the in-tree users to utilize the new (relatively)
>> DSA binding that was introduced with commit 8c5ad1d6179d ("net: dsa: Document
>> new binding"). The legacy binding node is kept included, but is marked
>> disabled.
>> 
>> Changes in v2:
>> 
>> - patch 1: Use an hexadecimal reg property
>> - patch 2: fixed the subject
>> - patch 3: s/okay/disabled/ for the legacy DSA node
>> - patches 7/8: fixed a stray whitespace
>> 
>> In about 2-3 releases we may consider removing the old DSA binding entirely
>> from the kernel.
>
> Gregory, are you going to take this for 4.11? Thanks

it is my intend but I am waiting for the feedback from Andrew.

Gregory

>
>> 
>> Thank you!
>> 
>> Florian Fainelli (8):
>>   ARM: dts: armada-370-rd: Utilize new DSA binding
>>   ARM: dts: armada-385-linksys: Utilize new DSA binding
>>   ARM: dts: armada-388-clearfog: Utilize new DSA binding
>>   ARM: dts: armada-xp-linksys-mamba: Utilize new DSA binding
>>   ARM: dts: kirkwood-dir665: Utilize new DSA binding
>>   ARM: dts: kirkwood-linksys-viper: Utilize new DSA binding
>>   ARM: dts: kirkwood-mv88f6281gtw-ge: Utilize new DSA binding
>>   ARM: dts: kirkwood-rd88f6281: Utilize new DSA binding
>> 
>>  arch/arm/boot/dts/armada-370-rd.dts            | 44 +++++++++++++++++
>>  arch/arm/boot/dts/armada-385-linksys.dtsi      | 52 ++++++++++++++++++++-
>>  arch/arm/boot/dts/armada-388-clearfog.dts      | 65 ++++++++++++++++++++++++++
>>  arch/arm/boot/dts/armada-xp-linksys-mamba.dts  | 53 +++++++++++++++++++++
>>  arch/arm/boot/dts/kirkwood-dir665.dts          | 49 +++++++++++++++++++
>>  arch/arm/boot/dts/kirkwood-linksys-viper.dts   | 49 +++++++++++++++++++
>>  arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 49 +++++++++++++++++++
>>  arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts    | 11 +++++
>>  arch/arm/boot/dts/kirkwood-rd88f6281.dtsi      | 44 +++++++++++++++++
>>  9 files changed, 415 insertions(+), 1 deletion(-)
>> 
>
>
> -- 
> Florian

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Re: [PATCH v2 1/8] ARM: dts: armada-370-rd: Utilize new DSA binding

[Andrew Lunn]

On Thu, Jan 05, 2017 at 11:29:50AM -0800, Florian Fainelli wrote:
> Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: dsa:
> Document new binding"). The legacy binding node is kept included, but is marked
> disabled.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Tested-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH v2 2/8] ARM: dts: armada-385-linksys: Utilize new DSA binding

[Andrew Lunn]

On Thu, Jan 05, 2017 at 11:29:51AM -0800, Florian Fainelli wrote:
> Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: dsa:
> Document new binding"). The legacy binding node is kept included, but is marked
> disabled.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH v2 4/8] ARM: dts: armada-xp-linksys-mamba: Utilize new DSA binding

[Andrew Lunn]

On Thu, Jan 05, 2017 at 11:29:53AM -0800, Florian Fainelli wrote:
> Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: dsa:
> Document new binding"). The legacy binding node is kept included, but is marked
> disabled.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Tested-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH v2 6/8] ARM: dts: kirkwood-linksys-viper: Utilize new DSA binding

[Andrew Lunn]

On Thu, Jan 05, 2017 at 11:29:55AM -0800, Florian Fainelli wrote:
> Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: dsa:
> Document new binding"). The legacy binding node is kept included, but is marked
> disabled.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH v2 7/8] ARM: dts: kirkwood-mv88f6281gtw-ge: Utilize new DSA binding

[Andrew Lunn]

On Thu, Jan 05, 2017 at 11:29:56AM -0800, Florian Fainelli wrote:
> Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: dsa:
> Document new binding"). The legacy binding node is kept included, but is marked
> disabled.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH v2 8/8] ARM: dts: kirkwood-rd88f6281: Utilize new DSA binding

[Andrew Lunn]

On Thu, Jan 05, 2017 at 11:29:57AM -0800, Florian Fainelli wrote:
> Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: dsa:
> Document new binding"). The legacy binding node is kept included, but is marked
> disabled.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts | 11 ++++++++
>  arch/arm/boot/dts/kirkwood-rd88f6281.dtsi   | 44 +++++++++++++++++++++++++++++
>  2 files changed, 55 insertions(+)

Hi Florian

What about arch/arm/boot/dts/kirkwood-rd88f6281-a.dts

     Andrew

Re: [PATCH v2 5/8] ARM: dts: kirkwood-dir665: Utilize new DSA binding

[Andrew Lunn]

On Thu, Jan 05, 2017 at 11:29:54AM -0800, Florian Fainelli wrote:
> Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: dsa:
> Document new binding"). The legacy binding node is kept included, but is marked
> disabled.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Tested-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH v2 8/8] ARM: dts: kirkwood-rd88f6281: Utilize new DSA binding

[Florian Fainelli]

On 01/17/2017 09:34 AM, Andrew Lunn wrote:
> On Thu, Jan 05, 2017 at 11:29:57AM -0800, Florian Fainelli wrote:
>> Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: dsa:
>> Document new binding"). The legacy binding node is kept included, but is marked
>> disabled.
>>
>> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
>> ---
>>  arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts | 11 ++++++++
>>  arch/arm/boot/dts/kirkwood-rd88f6281.dtsi   | 44 +++++++++++++++++++++++++++++
>>  2 files changed, 55 insertions(+)
> 
> Hi Florian
> 
> What about arch/arm/boot/dts/kirkwood-rd88f6281-a.dts

Whoops, missed that one, let me resubmit a change to that file too along
with your tags on the other patches, thanks for testing and reviewing!
-- 
Florian