From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933071AbdAGMkp (ORCPT ); Sat, 7 Jan 2017 07:40:45 -0500 Received: from smida.it ([94.23.22.176]:56805 "EHLO smtp.smida.it" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S932130AbdAGMkg (ORCPT ); Sat, 7 Jan 2017 07:40:36 -0500 DMARC-Filter: OpenDMARC Filter v1.3.0 smtp.smida.it 6D17D4398F Authentication-Results: mail.smida.it; dmarc=fail header.from=etezian.org Date: Sat, 7 Jan 2017 21:40:26 +0900 From: Andi Shyti To: Chanwoo Choi Cc: Andi Shyti , Dmitry Torokhov , Rob Herring , Mark Rutland , Catalin Marinas , Will Deacon , Kukjin Kim , Krzysztof Kozlowski , Javier Martinez Canillas , Chanwoo Choi , Beomho Seo , linux-arm-kernel , linux-input@vger.kernel.org, devicetree , linux-kernel , linux-samsung-soc , Jaechul Lee , Andi Shyti , Jaechul Lee Subject: Re: [PATCH v5 5/5] arm64: dts: exynos: Add tm2 touchkey node Message-ID: <20170107124026.gl447hl5bucdflyk@jack.zhora.eu> References: <20170106134350.32428-1-andi.shyti@samsung.com> <20170106134350.32428-6-andi.shyti@samsung.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: NeoMutt/20161126 (1.7.1) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Chanwoo, > >>> + touchkey@20 { > >>> + compatible = "samsung,tm2-touchkey"; > >>> + reg = <0x20>; > >>> + interrupt-parent = <&gpa3>; > >>> + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; > >>> + vcc-supply = <&ldo32_reg>; > >>> + vdd-supply = <&ldo33_reg>; > >>> + }; > >>> +}; > >>> + > >>> &ldo31_reg { > >>> regulator-name = "TSP_VDD_1.85V_AP"; > >>> regulator-min-microvolt = <1850000>; > > I repiled the touchkey driver against compatible name. > Usually, when developing the device driver, we use the specific h/w name > but in this patch, the touckey dt node uses the h/w board name instead of > original touckhey name. this should be a device specifically done for the tm2 and we are not sure who is the manufacturer of the device. In order to not assign the device to the wrong manufacturer, we preferred calling it Samsung as it is in a Samsung device. Andi