From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: Nayna Jain <nayna@linux.vnet.ibm.com>
Cc: tpmdd-devel@lists.sourceforge.net, peterhuewe@gmx.de,
tpmdd@selhorst.net, jgunthorpe@obsidianresearch.com,
linux-security-module@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 1/2] tpm: implement TPM 2.0 capability to get active PCR banks
Date: Wed, 18 Jan 2017 15:45:22 +0200 [thread overview]
Message-ID: <20170118134522.ftikno7gy3vttv6w@intel.com> (raw)
In-Reply-To: <1484729090-16012-2-git-send-email-nayna@linux.vnet.ibm.com>
On Wed, Jan 18, 2017 at 03:44:49AM -0500, Nayna Jain wrote:
> This patch implements the TPM 2.0 capability TPM_CAP_PCRS to
> retrieve the active PCR banks from the TPM. This is needed
> to enable extending all active banks as recommended by TPM 2.0
> TCG Specification.
>
> Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
> ---
> drivers/char/tpm/tpm.h | 4 ++++
> drivers/char/tpm/tpm2-cmd.c | 57 +++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 61 insertions(+)
>
> diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
> index 1ae9768..dddd573 100644
> --- a/drivers/char/tpm/tpm.h
> +++ b/drivers/char/tpm/tpm.h
> @@ -127,6 +127,7 @@ enum tpm2_permanent_handles {
> };
>
> enum tpm2_capabilities {
> + TPM2_CAP_PCRS = 5,
> TPM2_CAP_TPM_PROPERTIES = 6,
> };
>
> @@ -187,6 +188,8 @@ struct tpm_chip {
>
> const struct attribute_group *groups[3];
> unsigned int groups_cnt;
> +
> + u16 active_banks[7];
> #ifdef CONFIG_ACPI
> acpi_handle acpi_dev_handle;
> char ppi_version[TPM_PPI_VERSION_LEN + 1];
> @@ -545,4 +548,5 @@ int tpm2_auto_startup(struct tpm_chip *chip);
> void tpm2_shutdown(struct tpm_chip *chip, u16 shutdown_type);
> unsigned long tpm2_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal);
> int tpm2_probe(struct tpm_chip *chip);
> +ssize_t tpm2_get_pcr_allocation(struct tpm_chip *chip);
> #endif
> diff --git a/drivers/char/tpm/tpm2-cmd.c b/drivers/char/tpm/tpm2-cmd.c
> index 6eda239..75a7546 100644
> --- a/drivers/char/tpm/tpm2-cmd.c
> +++ b/drivers/char/tpm/tpm2-cmd.c
> @@ -998,3 +998,60 @@ int tpm2_auto_startup(struct tpm_chip *chip)
> rc = -ENODEV;
> return rc;
> }
> +
> +struct tpm2_pcr_selection {
> + __be16 hash_alg;
> + u8 size_of_select;
> + u8 pcr_select[3];
> +} __packed;
> +
> +/**
> + * tpm2_get_pcr_allocation() - get TPM active PCR banks.
> + *
> + * @chip: TPM chip to use.
> + *
> + * Return: Same as with tpm_transmit_cmd.
> + */
> +ssize_t tpm2_get_pcr_allocation(struct tpm_chip *chip)
> +{
> + struct tpm2_pcr_selection pcr_selection;
> + struct tpm_buf buf;
> + void *marker;
> + unsigned int count = 0;
You shouldn't initialize 'count'.
> + int rc;
> + int i;
> +
> + rc = tpm_buf_init(&buf, TPM2_ST_NO_SESSIONS, TPM2_CC_GET_CAPABILITY);
> + if (rc)
> + return rc;
> +
> + tpm_buf_append_u32(&buf, TPM2_CAP_PCRS);
> + tpm_buf_append_u32(&buf, 0);
> + tpm_buf_append_u32(&buf, 1);
> +
> + rc = tpm_transmit_cmd(chip, buf.data, PAGE_SIZE, 0,
> + "get tpm pcr allocation");
> + if (rc < 0)
> + goto out;
> +
> + count = be32_to_cpup(
> + (__be32 *)&buf.data[TPM_HEADER_SIZE + 5]);
> +
> + if (count > ARRAY_SIZE(chip->active_banks))
> + return -ENODEV;
> +
> + marker = &buf.data[TPM_HEADER_SIZE + 9];
> + for (i = 0; i < count; i++) {
> + memcpy(&pcr_selection, marker, sizeof(pcr_selection));
> + chip->active_banks[i] = be16_to_cpu(pcr_selection.hash_alg);
> + marker = marker + sizeof(struct tpm2_pcr_selection);
> + }
> +
> +out:
> + if (count < ARRAY_SIZE(chip->active_banks))
> + chip->active_banks[count] = 0;
> +
> + tpm_buf_destroy(&buf);
> +
> + return rc;
> +}
> --
> 2.5.0
Otherwise,
Reviewed-by: Jarkko Sakkinen <jarkko.sakkien@linux.intel.com>
/Jarkko
next prev parent reply other threads:[~2017-01-18 13:57 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-18 8:44 [PATCH v4 0/2] enhance TPM 2.0 extend function to support multiple PCR banks Nayna Jain
2017-01-18 8:44 ` [PATCH v4 1/2] tpm: implement TPM 2.0 capability to get active " Nayna Jain
2017-01-18 13:45 ` Jarkko Sakkinen [this message]
2017-01-18 13:49 ` Nayna
2017-01-19 10:47 ` Jarkko Sakkinen
2017-01-19 13:34 ` Nayna
2017-01-18 8:44 ` [PATCH v4 2/2] tpm: enhance TPM 2.0 PCR extend to support multiple banks Nayna Jain
2017-01-18 13:58 ` Jarkko Sakkinen
2017-01-19 9:18 ` Nayna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170118134522.ftikno7gy3vttv6w@intel.com \
--to=jarkko.sakkinen@linux.intel.com \
--cc=jgunthorpe@obsidianresearch.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-security-module@vger.kernel.org \
--cc=nayna@linux.vnet.ibm.com \
--cc=peterhuewe@gmx.de \
--cc=tpmdd-devel@lists.sourceforge.net \
--cc=tpmdd@selhorst.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).