[PATCH v2 07/14] MIPS: jz4780: DTS: Add nodes for ingenic pinctrl and gpio drivers

[Paul Cercueil <paul@crapouillou.net>]

For a description of the devicetree node, please read
Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt

For a description of the gpio devicetree nodes, please read
Documentation/devicetree/bindings/gpio/ingenic,gpio.txt

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 arch/mips/boot/dts/ingenic/jz4780.dtsi | 297 +++++++++++++++++++++++++++++++++
 1 file changed, 297 insertions(+)

v2: Changed the devicetree bindings to match the new driver

diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index b868b429add2..47e079e9236e 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -44,6 +44,303 @@
 		#clock-cells = <1>;
 	};
 
+	pinctrl: ingenic-pinctrl@10010000 {
+		compatible = "ingenic,jz4780-pinctrl";
+		reg = <0x10010000 0x600>;
+
+		ingenic,pull-ups   = <0x3fffffff 0xfff0030c 0xffffffff
+							  0xffff4fff 0xfffffb7c 0xffa7f00f>;
+		ingenic,pull-downs = <0x00000000 0x000f0c03 0x00000000
+							  0x0000b000 0x00000483 0x00580ff0>;
+
+		functions {
+			uart0 {
+				uart0-data {
+					/* RXD, TXD */
+					ingenic,pins = <0xa0 0 0xa3 0>;
+				};
+
+				uart0-hwflow {
+					/* CTS, RTS */
+					ingenic,pins = <0xa1 0 0xa2 0>;
+				};
+			};
+
+			uart1 {
+				uart1-data {
+					/* RXD, TXD */
+					ingenic,pins = <0x7a 0 0x7c 0>;
+				};
+
+				uart1-hwflow {
+					/* CTS, RTS */
+					ingenic,pins = <0x7b 0 0x7d 0>;
+				};
+			};
+
+			uart2 {
+				uart2-data {
+					/* RXD, TXD */
+					ingenic,pins = <0x66 1 0x67 1>;
+				};
+
+				uart2-hwflow {
+					/* CTS, RTS */
+					ingenic,pins = <0x65 1 0x64 1>;
+				};
+			};
+
+			uart3 {
+				uart3-data {
+					/* RXD, TXD */
+					ingenic,pins = <0x6c 0 0x85 1>;
+				};
+
+				uart3-hwflow {
+					/* CTS, RTS */
+					ingenic,pins = <0x88 0 0x89 0>;
+				};
+			};
+
+			uart4 {
+				uart4-data {
+					/* RXD, TXD */
+					ingenic,pins = <0x54 2 0x4a 2>;
+				};
+			};
+
+			msc0 {
+				msc0-8bit-a {
+					/* D4, D5, D6, D7, RST */
+					ingenic,pins = <0x04 1 0x05 1 0x06 1 0x07 1
+									0x18 1>;
+				};
+
+				msc0-4bit-a {
+					/* D1, D2, D3 */
+					ingenic,pins = <0x15 1 0x16 1 0x17 1>;
+				};
+
+				msc0-1bit-a {
+					/* CLK, CMD, D0 */
+					ingenic,pins = <0x12 1 0x13 1 0x14 1>;
+				};
+
+				msc0-1bit-e {
+					/* CLK, CMD, D0 */
+					ingenic,pins = <0x9c 0 0x9d 0 0x94 0>;
+				};
+
+				msc0-4bit-e {
+					/* D1, D2, D3 */
+					ingenic,pins = <0x95 0 0x96 0 0x97 0>;
+				};
+			};
+
+			msc1 {
+				msc1-1bit-d {
+					/* CLK, CMD, D0 */
+					ingenic,pins = <0x78 0 0x79 0 0x74 0>;
+				};
+
+				msc1-4bit-d {
+					/* D1, D2, D3 */
+					ingenic,pins = <0x75 0 0x76 0 0x77 0>;
+				};
+
+				msc1-1bit-e {
+					/* CLK, CMD, D0 */
+					ingenic,pins = <0x9c 1 0x9d 1 0x94 1>;
+				};
+
+				msc1-4bit-e {
+					/* D1, D2, D3 */
+					ingenic,pins = <0x95 1 0x96 1 0x97 1>;
+				};
+			};
+
+			nemc {
+				nemc-data {
+					/* SD0, SD1, SD2, SD3, SD4, SD5, SD6, SD7 */
+					ingenic,pins = <0x00 0 0x01 0 0x02 0 0x03 0
+									0x04 0 0x05 0 0x06 0 0x07 0>;
+				};
+
+				nemc-cle-ale {
+					/* SA0_CL, SA1_AL */
+					ingenic,pins = <0x20 0 0x21 0>;
+				};
+
+				nemc-addr {
+					/* SA2, SA3, SA4, SA5 */
+					ingenic,pins = <0x22 0 0x23 0 0x24 0 0x25 0>;
+				};
+
+				nemc-rd-we {
+					/* RD, WE */
+					ingenic,pins = <0x10 0 0x11 0>;
+				};
+
+				nemc-frd-fwe {
+					/* RD, WE */
+					ingenic,pins = <0x12 0 0x13 0>;
+				};
+			};
+
+			nemc-cs1 {
+				nemc-cs1 {
+					/* CS1 */
+					ingenic,pins = <0x15 0>;
+				};
+			};
+
+			nemc-cs6 {
+				nemc-cs6 {
+					/* CS6 */
+					ingenic,pins = <0x1a 0>;
+				};
+			};
+
+			i2c0 {
+				i2c0-data {
+					/* SDA, SCL */
+					ingenic,pins = <0x6e 0 0x6f 0>;
+				};
+			};
+
+			i2c1 {
+				i2c1-data {
+					/* SDA, SCL */
+					ingenic,pins = <0x8e 0 0x8f 0>;
+				};
+			};
+
+			i2c2 {
+				i2c2-data {
+					/* SDA, SCL */
+					ingenic,pins = <0xb0 2 0xb1 2>;
+				};
+			};
+
+			i2c3 {
+				i2c3-data {
+					/* SDA, SCL */
+					ingenic,pins = <0x6a 1 0x6b 1>;
+				};
+			};
+
+			i2c4 {
+				i2c4-data-pe {
+					/* SDA, SCL */
+					ingenic,pins = <0x8c 1 0x8d 1>;
+				};
+
+				i2c4-data-pf {
+					/* HDMI_SDA, HDMI_SCL */
+					ingenic,pins = <0xb9 1 0xb8 1>;
+				};
+			};
+
+			cim {
+				cim-pb {
+					ingenic,pins = <0x26 0 0x27 0 0x28 0 0x29 0
+									0x2a 0 0x2b 0 0x2c 0 0x2d 0
+									0x2e 0 0x2f 0 0x30 0 0x31 0>;
+				};
+			};
+		};
+	};
+
+	gpa: gpio-controller@10010000 {
+		compatible = "ingenic,jz4780-gpio";
+		reg = <0x10010000 0x100>;
+
+		gpio-controller;
+		gpio-ranges = <&pinctrl 0 0 32>;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <17>;
+	};
+
+	gpb: gpio-controller@10010100 {
+		compatible = "ingenic,jz4780-gpio";
+		reg = <0x10010100 0x100>;
+
+		gpio-controller;
+		gpio-ranges = <&pinctrl 0 32 32>;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <16>;
+	};
+
+	gpc: gpio-controller@10010200 {
+		compatible = "ingenic,jz4780-gpio";
+		reg = <0x10010200 0x100>;
+
+		gpio-controller;
+		gpio-ranges = <&pinctrl 0 64 32>;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <15>;
+	};
+
+	gpd: gpio-controller@10010300 {
+		compatible = "ingenic,jz4780-gpio";
+		reg = <0x10010300 0x100>;
+
+		gpio-controller;
+		gpio-ranges = <&pinctrl 0 96 32>;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <14>;
+	};
+
+	gpe: gpio-controller@10010400 {
+		compatible = "ingenic,jz4780-gpio";
+		reg = <0x10010400 0x100>;
+
+		gpio-controller;
+		gpio-ranges = <&pinctrl 0 128 32>;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <13>;
+	};
+
+	gpf: gpio-controller@10010500 {
+		compatible = "ingenic,jz4780-gpio";
+		reg = <0x10010500 0x100>;
+
+		gpio-controller;
+		gpio-ranges = <&pinctrl 0 160 32>;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <12>;
+	};
+
 	uart0: serial@10030000 {
 		compatible = "ingenic,jz4780-uart";
 		reg = <0x10030000 0x100>;
-- 
2.11.0