From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752680AbdAYSyz (ORCPT ); Wed, 25 Jan 2017 13:54:55 -0500 Received: from outils.crapouillou.net ([89.234.176.41]:37438 "EHLO outils.crapouillou.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752579AbdAYSwp (ORCPT ); Wed, 25 Jan 2017 13:52:45 -0500 From: Paul Cercueil To: Linus Walleij , Rob Herring , Mark Rutland , Ralf Baechle , Ulf Hansson Cc: Boris Brezillon , Thierry Reding , Bartlomiej Zolnierkiewicz , Maarten ter Huurne , Lars-Peter Clausen , Paul Burton , linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mips@linux-mips.org, linux-mmc@vger.kernel.org, linux-mtd@lists.infradead.org, linux-pwm@vger.kernel.org, linux-fbdev@vger.kernel.org, james.hogan@imgtec.com, Paul Cercueil Subject: [PATCH v3 09/14] MIPS: JZ4780: CI20: Add pinctrl configuration for several drivers Date: Wed, 25 Jan 2017 19:52:02 +0100 Message-Id: <20170125185207.23902-10-paul@crapouillou.net> In-Reply-To: <20170125185207.23902-1-paul@crapouillou.net> References: <27071da2f01d48141e8ac3dfaa13255d@mail.crapouillou.net> <20170125185207.23902-1-paul@crapouillou.net> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org We set the pin configuration for the jz4780-nand and jz4780-uart drivers. Signed-off-by: Paul Cercueil --- arch/mips/boot/dts/ingenic/ci20.dts | 60 +++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) v2: Changed the devicetree bindings to match the new driver v3: No changes diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index 1652d8d60b1e..fd138d9978c1 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -29,18 +29,30 @@ &uart0 { status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart0>; }; &uart1 { status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart1>; }; &uart3 { status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart2>; }; &uart4 { status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart4>; }; &nemc { @@ -61,6 +73,13 @@ ingenic,nemc-tAW = <15>; ingenic,nemc-tSTRV = <100>; + /* + * Only CLE/ALE are needed for the devices that are connected, rather + * than the full address line set. + */ + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc>; + nand@1 { reg = <1>; @@ -69,6 +88,9 @@ nand-ecc-mode = "hw"; nand-on-flash-bbt; + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc_cs1>; + partitions { compatible = "fixed-partitions"; #address-cells = <2>; @@ -106,3 +128,41 @@ &bch { status = "okay"; }; + +&pinctrl { + pins_uart0: uart0 { + function = "uart0"; + groups = "uart0-data"; + bias-disable; + }; + + pins_uart1: uart1 { + function = "uart1"; + groups = "uart1-data"; + bias-disable; + }; + + pins_uart2: uart2 { + function = "uart2"; + groups = "uart2-data", "uart2-hwflow"; + bias-disable; + }; + + pins_uart4: uart4 { + function = "uart4"; + groups = "uart4-data"; + bias-disable; + }; + + pins_nemc: nemc { + function = "nemc"; + groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe"; + bias-disable; + }; + + pins_nemc_cs1: nemc-cs1 { + function = "nemc-cs1"; + groups = "nemc-cs1"; + bias-disable; + }; +}; -- 2.11.0