From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752516AbdAYSwc (ORCPT ); Wed, 25 Jan 2017 13:52:32 -0500 Received: from outils.crapouillou.net ([89.234.176.41]:33194 "EHLO outils.crapouillou.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752393AbdAYSw2 (ORCPT ); Wed, 25 Jan 2017 13:52:28 -0500 From: Paul Cercueil To: Linus Walleij , Rob Herring , Mark Rutland , Ralf Baechle , Ulf Hansson Cc: Boris Brezillon , Thierry Reding , Bartlomiej Zolnierkiewicz , Maarten ter Huurne , Lars-Peter Clausen , Paul Burton , linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mips@linux-mips.org, linux-mmc@vger.kernel.org, linux-mtd@lists.infradead.org, linux-pwm@vger.kernel.org, linux-fbdev@vger.kernel.org, james.hogan@imgtec.com, Paul Cercueil Subject: [PATCH v3 01/14] Documentation: dt/bindings: Document pinctrl-ingenic Date: Wed, 25 Jan 2017 19:51:54 +0100 Message-Id: <20170125185207.23902-2-paul@crapouillou.net> In-Reply-To: <20170125185207.23902-1-paul@crapouillou.net> References: <27071da2f01d48141e8ac3dfaa13255d@mail.crapouillou.net> <20170125185207.23902-1-paul@crapouillou.net> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This commit adds documentation for the devicetree bidings of the pinctrl-ingenic driver, which handles pin configuration and pin muxing of the Ingenic SoCs currently supported by the Linux kernel. Signed-off-by: Paul Cercueil --- .../bindings/pinctrl/ingenic,pinctrl.txt | 77 ++++++++++++++++++++++ 1 file changed, 77 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt v2: Rewrote the documentation for the new pinctrl-ingenic driver v3: No changes diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt new file mode 100644 index 000000000000..ead5b01ad471 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt @@ -0,0 +1,77 @@ +Ingenic jz47xx pin controller + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +For the jz47xx SoCs, pin control is tightly bound with GPIO ports. All pins may +be used as GPIOs, multiplexed device functions are configured within the +GPIO port configuration registers and it is typical to refer to pins using the +naming scheme "PxN" where x is a character identifying the GPIO port with +which the pin is associated and N is an integer from 0 to 31 identifying the +pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and +PB31 is the last pin in GPIO port B. The jz4740 contains 4 GPIO ports, PA to +PD, for a total of 128 pins. The jz4780 contains 6 GPIO ports, PA to PF, for a +total of 192 pins. + + +Pin controller node +=================== + +Required properties: +- compatible: One of: + - "ingenic,jz4740-pinctrl" + - "ingenic,jz4780-pinctrl" + +Optional properties: +- ingenic,pull-ups: A list of 32-bit bit fields, where each bit set tells the + driver that a pull-up resistor is available for this pin. + By default, the driver considers that all pins feature a pull-up resistor. +- ingenic,pull-downs: A list of 32-bit bit fields, where each bit set tells + the driver that a pull-down resistor is available for this pin. + By default, the driver considers that all pins feature a pull-down + resistor. + + +'functions' sub-node +==================== + +The 'functions' node will contain sub-nodes that correspond to pin function +nodes, and no properties. Pin function nodes will contain sub-nodes that +correspond to pin groups, and no properties. + +The names of the pin function nodes will end up being the available functions +provided by the pinctrl driver. +The names of the pin group nodes will end up being the available groups +provided by the pinctrl driver. + +Required properties for pin groups: +- ingenic,pins: ; + where 'pin' is the number of the pin, and 'mode' is the function mode of the + pin that should be enabled for this group. + + +Example: +======= + +pinctrl: ingenic-pinctrl@10010000 { + compatible = "ingenic,jz4740-pinctrl"; + reg = <0x10010000 0x400>; + + ingenic,pull-ups = <0xffffffff 0xffffffff 0xffffffff 0xdfffffff>; + ingenic,pull-downs = <0x00000000 0x00000000 0x00000000 0x00000000>; + + functions { + mmc { + mmc-1bit { + /* CLK, CMD, D0 */ + ingenic,pins = <0x69 0 0x68 0 0x6a 0>; + }; + + mmc-4bit { + /* D1, D2, D3 */ + ingenic,pins = <0x6b 0 0x6c 0 0x6d 0>; + }; + }; + }; +}; -- 2.11.0