On Wed, Dec 14, 2016 at 11:19:56AM +0800, Caesar Wang wrote: > 10.1WXGA is a color active matrix TFT LCD module using amorphous silicon > TFT's as an active switching devices. It can be supported by the > simple-panel driver. > > Read the panel default edid information: > > EDID MODE DETAILS > name = > pixel_clock = 71900 > lvds_dual_channel = 0 > refresh = 0 > ha = 1280 > hbl = 160 > hso = 48 > hspw = 32 > hborder = 0 > va = 800 > vbl = 32 > vso = 3 > vspw = 5 > vborder = 0 > phsync = + > pvsync = - > x_mm = 0 > y_mm = 0 > drm_display_mode > .hdisplay = 1280 > .hsync_start = 1328 > .hsync_end = 1360 > .htotal = 1440 > .vdisplay = 800 > .vsync_start = 803 > .vsync_end = 808 > .vtotal = 832 > > There are two modes in the edid: > Detailed mode1: Clock 71.900 MHz, 216 mm x 135 mm > 1280 1328 1360 1440 hborder 0 > 800 803 808 832 vborder 0 > +hsync -vsync > Detailed mode2: Clock 57.500 MHz, 216 mm x 135 mm > 1280 1328 1360 1440 hborder 0 > 800 803 808 832 vborder 0 > +hsync -vsync > > Add the both edid to support more modes for BOE nv101wxmn51. > > Signed-off-by: Caesar Wang > --- > > Changes in v3: > - As Stéphane commented on https://patchwork.kernel.org/patch/9465911, > add downclock mode for edid. > > Changes in v2: > - fix the vsync_start and vsync_end from the edid. > - change the commit. > > drivers/gpu/drm/panel/panel-simple.c | 45 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 45 insertions(+) Applied with a slightly modified commit message. Thanks, Thierry