linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>
Cc: Chen-Yu Tsai <wens@csie.org>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-sunxi@googlegroups.com
Subject: [PATCH v2 07/10] clk: sunxi-ng: Add A80 Display Engine CCU
Date: Sat, 28 Jan 2017 20:22:36 +0800	[thread overview]
Message-ID: <20170128122239.4480-8-wens@csie.org> (raw)
In-Reply-To: <20170128122239.4480-1-wens@csie.org>

With the A80 SoC, Allwinner grouped and moved some subsystem specific
clock controls to a separate address space, and possibly separate
hardware block.

One such subsystem is the display engine. The main clock control unit
now only has 1 set of bus gate, dram gate, module clock, and reset
control for the entire display subsystem. These feed into a secondary
clock control unit, which has controls for each individual module
of the display pipeline. This block is not documented in the user
manual. Allwinner's kernel was used as the reference.

Add support for the display engine clock controls found on the A80.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 .../devicetree/bindings/clock/sun9i-de.txt         |  28 ++
 drivers/clk/sunxi-ng/Makefile                      |   1 +
 drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c            | 283 +++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun9i-a80-de.h            |  33 +++
 include/dt-bindings/clock/sun9i-a80-de.h           |  80 ++++++
 include/dt-bindings/reset/sun9i-a80-de.h           |  58 +++++
 6 files changed, 483 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/sun9i-de.txt
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun9i-a80-de.h
 create mode 100644 include/dt-bindings/clock/sun9i-a80-de.h
 create mode 100644 include/dt-bindings/reset/sun9i-a80-de.h

diff --git a/Documentation/devicetree/bindings/clock/sun9i-de.txt b/Documentation/devicetree/bindings/clock/sun9i-de.txt
new file mode 100644
index 000000000000..fb18f327b97a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sun9i-de.txt
@@ -0,0 +1,28 @@
+Allwinner A80 Display Engine Clock Control Binding
+--------------------------------------------------
+
+Required properties :
+- compatible: must contain one of the following compatibles:
+		- "allwinner,sun9i-a80-de-clks"
+
+- reg: Must contain the registers base address and length
+- clocks: phandle to the clocks feeding the display engine subsystem.
+	  Three are needed:
+  - "mod": the display engine module clock
+  - "dram": the DRAM bus clock for the system
+  - "bus": the bus clock for the whole display engine subsystem
+- clock-names: Must contain the clock names described just above
+- resets: phandle to the reset control for the display engine subsystem.
+- #clock-cells : must contain 1
+- #reset-cells : must contain 1
+
+Example:
+de_clocks: clock@3000000 {
+	compatible = "allwinner,sun9i-a80-de-clks";
+	reg = <0x03000000 0x30>;
+	clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>;
+	clock-names = "mod", "dram", "bus";
+	resets = <&ccu RST_BUS_DE>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 8f37ef7fb67d..6feaac0c5600 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -26,4 +26,5 @@ obj-$(CONFIG_SUN8I_A33_CCU)	+= ccu-sun8i-a33.o
 obj-$(CONFIG_SUN8I_H3_CCU)	+= ccu-sun8i-h3.o
 obj-$(CONFIG_SUN8I_V3S_CCU)	+= ccu-sun8i-v3s.o
 obj-$(CONFIG_SUN9I_A80_CCU)	+= ccu-sun9i-a80.o
+obj-$(CONFIG_SUN9I_A80_CCU)	+= ccu-sun9i-a80-de.o
 obj-$(CONFIG_SUN9I_A80_CCU)	+= ccu-sun9i-a80-usb.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
new file mode 100644
index 000000000000..3fc27db0a49a
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
@@ -0,0 +1,283 @@
+/*
+ * Copyright (c) 2016 Chen-Yu Tsai. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include "ccu_common.h"
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_reset.h"
+
+#include "ccu-sun9i-a80-de.h"
+
+static SUNXI_CCU_GATE(fe0_clk,		"fe0",		"fe0-div",
+		      0x00, BIT(0), 0);
+static SUNXI_CCU_GATE(fe1_clk,		"fe1",		"fe1-div",
+		      0x00, BIT(1), 0);
+static SUNXI_CCU_GATE(fe2_clk,		"fe2",		"fe2-div",
+		      0x00, BIT(2), 0);
+static SUNXI_CCU_GATE(iep_deu0_clk,	"iep-deu0",	"de",
+		      0x00, BIT(4), 0);
+static SUNXI_CCU_GATE(iep_deu1_clk,	"iep-deu1",	"de",
+		      0x00, BIT(5), 0);
+static SUNXI_CCU_GATE(be0_clk,		"be0",		"be0-div",
+		      0x00, BIT(8), 0);
+static SUNXI_CCU_GATE(be1_clk,		"be1",		"be1-div",
+		      0x00, BIT(9), 0);
+static SUNXI_CCU_GATE(be2_clk,		"be2",		"be2-div",
+		      0x00, BIT(10), 0);
+static SUNXI_CCU_GATE(iep_drc0_clk,	"iep-drc0",	"de",
+		      0x00, BIT(12), 0);
+static SUNXI_CCU_GATE(iep_drc1_clk,	"iep-drc1",	"de",
+		      0x00, BIT(13), 0);
+static SUNXI_CCU_GATE(merge_clk,	"merge",	"de",
+		      0x00, BIT(20), 0);
+
+static SUNXI_CCU_GATE(dram_fe0_clk,	"dram-fe0",	"sdram",
+		      0x04, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_fe1_clk,	"dram-fe1",	"sdram",
+		      0x04, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_fe2_clk,	"dram-fe2",	"sdram",
+		      0x04, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_deu0_clk,	"dram-deu0",	"sdram",
+		      0x04, BIT(4), 0);
+static SUNXI_CCU_GATE(dram_deu1_clk,	"dram-deu1",	"sdram",
+		      0x04, BIT(5), 0);
+static SUNXI_CCU_GATE(dram_be0_clk,	"dram-be0",	"sdram",
+		      0x04, BIT(8), 0);
+static SUNXI_CCU_GATE(dram_be1_clk,	"dram-be1",	"sdram",
+		      0x04, BIT(9), 0);
+static SUNXI_CCU_GATE(dram_be2_clk,	"dram-be2",	"sdram",
+		      0x04, BIT(10), 0);
+static SUNXI_CCU_GATE(dram_drc0_clk,	"dram-drc0",	"sdram",
+		      0x04, BIT(12), 0);
+static SUNXI_CCU_GATE(dram_drc1_clk,	"dram-drc1",	"sdram",
+		      0x04, BIT(13), 0);
+
+static SUNXI_CCU_GATE(bus_fe0_clk,	"bus-fe0",	"bus-de",
+		      0x08, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_fe1_clk,	"bus-fe1",	"bus-de",
+		      0x08, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_fe2_clk,	"bus-fe2",	"bus-de",
+		      0x08, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_deu0_clk,	"bus-deu0",	"bus-de",
+		      0x08, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_deu1_clk,	"bus-deu1",	"bus-de",
+		      0x08, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_be0_clk,	"bus-be0",	"bus-de",
+		      0x08, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_be1_clk,	"bus-be1",	"bus-de",
+		      0x08, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_be2_clk,	"bus-be2",	"bus-de",
+		      0x08, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_drc0_clk,	"bus-drc0",	"bus-de",
+		      0x08, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_drc1_clk,	"bus-drc1",	"bus-de",
+		      0x08, BIT(13), 0);
+
+static SUNXI_CCU_M(fe0_div_clk, "fe0-div", "de", 0x20, 0, 4, 0);
+static SUNXI_CCU_M(fe1_div_clk, "fe1-div", "de", 0x20, 4, 4, 0);
+static SUNXI_CCU_M(fe2_div_clk, "fe2-div", "de", 0x20, 8, 4, 0);
+static SUNXI_CCU_M(be0_div_clk, "be0-div", "de", 0x20, 16, 4, 0);
+static SUNXI_CCU_M(be1_div_clk, "be1-div", "de", 0x20, 20, 4, 0);
+static SUNXI_CCU_M(be2_div_clk, "be2-div", "de", 0x20, 24, 4, 0);
+
+static struct ccu_common *sun9i_a80_de_clks[] = {
+	&fe0_clk.common,
+	&fe1_clk.common,
+	&fe2_clk.common,
+	&iep_deu0_clk.common,
+	&iep_deu1_clk.common,
+	&be0_clk.common,
+	&be1_clk.common,
+	&be2_clk.common,
+	&iep_drc0_clk.common,
+	&iep_drc1_clk.common,
+	&merge_clk.common,
+
+	&dram_fe0_clk.common,
+	&dram_fe1_clk.common,
+	&dram_fe2_clk.common,
+	&dram_deu0_clk.common,
+	&dram_deu1_clk.common,
+	&dram_be0_clk.common,
+	&dram_be1_clk.common,
+	&dram_be2_clk.common,
+	&dram_drc0_clk.common,
+	&dram_drc1_clk.common,
+
+	&bus_fe0_clk.common,
+	&bus_fe1_clk.common,
+	&bus_fe2_clk.common,
+	&bus_deu0_clk.common,
+	&bus_deu1_clk.common,
+	&bus_be0_clk.common,
+	&bus_be1_clk.common,
+	&bus_be2_clk.common,
+	&bus_drc0_clk.common,
+	&bus_drc1_clk.common,
+
+	&fe0_div_clk.common,
+	&fe1_div_clk.common,
+	&fe2_div_clk.common,
+	&be0_div_clk.common,
+	&be1_div_clk.common,
+	&be2_div_clk.common,
+};
+
+static struct clk_hw_onecell_data sun9i_a80_de_hw_clks = {
+	.hws	= {
+		[CLK_FE0]	= &fe0_clk.common.hw,
+		[CLK_FE1]	= &fe1_clk.common.hw,
+		[CLK_FE2]	= &fe2_clk.common.hw,
+		[CLK_IEP_DEU0]	= &iep_deu0_clk.common.hw,
+		[CLK_IEP_DEU1]	= &iep_deu1_clk.common.hw,
+		[CLK_BE0]	= &be0_clk.common.hw,
+		[CLK_BE1]	= &be1_clk.common.hw,
+		[CLK_BE2]	= &be2_clk.common.hw,
+		[CLK_IEP_DRC0]	= &iep_drc0_clk.common.hw,
+		[CLK_IEP_DRC1]	= &iep_drc1_clk.common.hw,
+		[CLK_MERGE]	= &merge_clk.common.hw,
+
+		[CLK_DRAM_FE0]	= &dram_fe0_clk.common.hw,
+		[CLK_DRAM_FE1]	= &dram_fe1_clk.common.hw,
+		[CLK_DRAM_FE2]	= &dram_fe2_clk.common.hw,
+		[CLK_DRAM_DEU0]	= &dram_deu0_clk.common.hw,
+		[CLK_DRAM_DEU1]	= &dram_deu1_clk.common.hw,
+		[CLK_DRAM_BE0]	= &dram_be0_clk.common.hw,
+		[CLK_DRAM_BE1]	= &dram_be1_clk.common.hw,
+		[CLK_DRAM_BE2]	= &dram_be2_clk.common.hw,
+		[CLK_DRAM_DRC0]	= &dram_drc0_clk.common.hw,
+		[CLK_DRAM_DRC1]	= &dram_drc1_clk.common.hw,
+
+		[CLK_BUS_FE0]	= &bus_fe0_clk.common.hw,
+		[CLK_BUS_FE1]	= &bus_fe1_clk.common.hw,
+		[CLK_BUS_FE2]	= &bus_fe2_clk.common.hw,
+		[CLK_BUS_DEU0]	= &bus_deu0_clk.common.hw,
+		[CLK_BUS_DEU1]	= &bus_deu1_clk.common.hw,
+		[CLK_BUS_BE0]	= &bus_be0_clk.common.hw,
+		[CLK_BUS_BE1]	= &bus_be1_clk.common.hw,
+		[CLK_BUS_BE2]	= &bus_be2_clk.common.hw,
+		[CLK_BUS_DRC0]	= &bus_drc0_clk.common.hw,
+		[CLK_BUS_DRC1]	= &bus_drc1_clk.common.hw,
+
+		[CLK_FE0_DIV]	= &fe0_div_clk.common.hw,
+		[CLK_FE1_DIV]	= &fe1_div_clk.common.hw,
+		[CLK_FE2_DIV]	= &fe2_div_clk.common.hw,
+		[CLK_BE0_DIV]	= &be0_div_clk.common.hw,
+		[CLK_BE1_DIV]	= &be1_div_clk.common.hw,
+		[CLK_BE2_DIV]	= &be2_div_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun9i_a80_de_resets[] = {
+	[RST_FE0]	= { 0x0c, BIT(0) },
+	[RST_FE1]	= { 0x0c, BIT(1) },
+	[RST_FE2]	= { 0x0c, BIT(2) },
+	[RST_DEU0]	= { 0x0c, BIT(4) },
+	[RST_DEU1]	= { 0x0c, BIT(5) },
+	[RST_BE0]	= { 0x0c, BIT(8) },
+	[RST_BE1]	= { 0x0c, BIT(9) },
+	[RST_BE2]	= { 0x0c, BIT(10) },
+	[RST_DRC0]	= { 0x0c, BIT(12) },
+	[RST_DRC1]	= { 0x0c, BIT(13) },
+	[RST_MERGE]	= { 0x0c, BIT(20) },
+};
+
+static const struct sunxi_ccu_desc sun9i_a80_de_clk_desc = {
+	.ccu_clks	= sun9i_a80_de_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun9i_a80_de_clks),
+
+	.hw_clks	= &sun9i_a80_de_hw_clks,
+
+	.resets		= sun9i_a80_de_resets,
+	.num_resets	= ARRAY_SIZE(sun9i_a80_de_resets),
+};
+
+static int sun9i_a80_de_clk_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct clk *bus_clk;
+	struct reset_control *rstc;
+	void __iomem *reg;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	bus_clk = devm_clk_get(&pdev->dev, "bus");
+	if (IS_ERR(bus_clk)) {
+		ret = PTR_ERR(bus_clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
+		return ret;
+	}
+
+	rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(rstc)) {
+		ret = PTR_ERR(bus_clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"Couldn't get reset control: %d\n", ret);
+		return ret;
+	}
+
+	/* The bus clock needs to be enabled for us to access the registers */
+	ret = clk_prepare_enable(bus_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Couldn't enable bus clk: %d\n", ret);
+		return ret;
+	}
+
+	/* The reset control needs to be asserted for the controls to work */
+	ret = reset_control_deassert(rstc);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Couldn't deassert reset control: %d\n", ret);
+		goto err_disable_clk;
+	}
+
+	ret = sunxi_ccu_probe(pdev->dev.of_node, reg,
+			      &sun9i_a80_de_clk_desc);
+	if (ret)
+		goto err_assert_reset;
+
+	return 0;
+
+err_assert_reset:
+	reset_control_assert(rstc);
+err_disable_clk:
+	clk_disable_unprepare(bus_clk);
+	return ret;
+}
+
+static const struct of_device_id sun9i_a80_de_clk_ids[] = {
+	{ .compatible = "allwinner,sun9i-a80-de-clks" },
+	{ }
+};
+
+static struct platform_driver sun9i_a80_de_clk_driver = {
+	.probe	= sun9i_a80_de_clk_probe,
+	.driver	= {
+		.name	= "sun9i-a80-de-clks",
+		.of_match_table	= sun9i_a80_de_clk_ids,
+	},
+};
+builtin_platform_driver(sun9i_a80_de_clk_driver);
diff --git a/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.h b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.h
new file mode 100644
index 000000000000..a4769041e40f
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2016 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN9I_A80_DE_H_
+#define _CCU_SUN9I_A80_DE_H_
+
+#include <dt-bindings/clock/sun9i-a80-de.h>
+#include <dt-bindings/reset/sun9i-a80-de.h>
+
+/* Intermediary clock dividers are not exported */
+#define CLK_FE0_DIV	31
+#define CLK_FE1_DIV	32
+#define CLK_FE2_DIV	33
+#define CLK_BE0_DIV	34
+#define CLK_BE1_DIV	35
+#define CLK_BE2_DIV	36
+
+#define CLK_NUMBER	(CLK_BE2_DIV + 1)
+
+#endif /* _CCU_SUN9I_A80_DE_H_ */
diff --git a/include/dt-bindings/clock/sun9i-a80-de.h b/include/dt-bindings/clock/sun9i-a80-de.h
new file mode 100644
index 000000000000..3dad6c3cd131
--- /dev/null
+++ b/include/dt-bindings/clock/sun9i-a80-de.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SUN9I_A80_DE_H_
+#define _DT_BINDINGS_CLOCK_SUN9I_A80_DE_H_
+
+#define CLK_FE0			0
+#define CLK_FE1			1
+#define CLK_FE2			2
+#define CLK_IEP_DEU0		3
+#define CLK_IEP_DEU1		4
+#define CLK_BE0			5
+#define CLK_BE1			6
+#define CLK_BE2			7
+#define CLK_IEP_DRC0		8
+#define CLK_IEP_DRC1		9
+#define CLK_MERGE		10
+
+#define CLK_DRAM_FE0		11
+#define CLK_DRAM_FE1		12
+#define CLK_DRAM_FE2		13
+#define CLK_DRAM_DEU0		14
+#define CLK_DRAM_DEU1		15
+#define CLK_DRAM_BE0		16
+#define CLK_DRAM_BE1		17
+#define CLK_DRAM_BE2		18
+#define CLK_DRAM_DRC0		19
+#define CLK_DRAM_DRC1		20
+
+#define CLK_BUS_FE0		21
+#define CLK_BUS_FE1		22
+#define CLK_BUS_FE2		23
+#define CLK_BUS_DEU0		24
+#define CLK_BUS_DEU1		25
+#define CLK_BUS_BE0		26
+#define CLK_BUS_BE1		27
+#define CLK_BUS_BE2		28
+#define CLK_BUS_DRC0		29
+#define CLK_BUS_DRC1		30
+
+#endif /* _DT_BINDINGS_CLOCK_SUN9I_A80_DE_H_ */
diff --git a/include/dt-bindings/reset/sun9i-a80-de.h b/include/dt-bindings/reset/sun9i-a80-de.h
new file mode 100644
index 000000000000..205072770171
--- /dev/null
+++ b/include/dt-bindings/reset/sun9i-a80-de.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RESET_SUN9I_A80_DE_H_
+#define _DT_BINDINGS_RESET_SUN9I_A80_DE_H_
+
+#define RST_FE0		0
+#define RST_FE1		1
+#define RST_FE2		2
+#define RST_DEU0	3
+#define RST_DEU1	4
+#define RST_BE0		5
+#define RST_BE1		6
+#define RST_BE2		7
+#define RST_DRC0	8
+#define RST_DRC1	9
+#define RST_MERGE	10
+
+#endif /* _DT_BINDINGS_RESET_SUN9I_A80_DE_H_ */
-- 
2.11.0

  parent reply	other threads:[~2017-01-28 12:35 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-28 12:22 [PATCH v2 00/10] clk: sunxi-ng: Add support for A80 CCUs Chen-Yu Tsai
2017-01-28 12:22 ` [PATCH v2 01/10] clk: sunxi-ng: mux: Fix determine_rate for mux clocks with pre-dividers Chen-Yu Tsai
2017-01-28 12:22 ` [PATCH v2 02/10] clk: sunxi-ng: mux: honor CLK_SET_RATE_NO_REPARENT flag Chen-Yu Tsai
2017-01-28 12:22 ` [PATCH v2 03/10] clk: sunxi-ng: mux: Get closest parent rate possible with CLK_SET_RATE_PARENT Chen-Yu Tsai
2017-01-28 12:22 ` [PATCH v2 04/10] clk: sunxi-ng: Support separately grouped PLL lock status register Chen-Yu Tsai
2017-01-28 12:22 ` [PATCH v2 05/10] clk: sunxi-ng: Add A80 CCU Chen-Yu Tsai
2017-01-28 12:22 ` [PATCH v2 06/10] clk: sunxi-ng: Add A80 USB CCU Chen-Yu Tsai
2017-01-28 12:22 ` Chen-Yu Tsai [this message]
2017-01-28 12:22 ` [PATCH v2 08/10] ARM: dts: sun8i-a23-q8-tablet: Drop pinmux setting for codec PA gpio Chen-Yu Tsai
2017-01-28 12:22 ` [PATCH v2 09/10] ARM: dts: sunxi: Remove no longer used pinctrl/sun4i-a10.h header Chen-Yu Tsai
2017-01-28 12:22 ` [PATCH v2 10/10] ARM: dts: sun9i: Switch to new clock bindings Chen-Yu Tsai
2017-01-30  7:42 ` [PATCH v2 00/10] clk: sunxi-ng: Add support for A80 CCUs Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170128122239.4480-8-wens@csie.org \
    --to=wens@csie.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).