linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
@ 2017-02-14 19:17 Ralph Sennhauser
  2017-02-15 15:18 ` Gregory CLEMENT
  0 siblings, 1 reply; 5+ messages in thread
From: Ralph Sennhauser @ 2017-02-14 19:17 UTC (permalink / raw)
  To: Gregory Clement
  Cc: Ralph Sennhauser, Imre Kaloz, Rob Herring, Mark Rutland,
	Russell King, Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	moderated list:ARM PORT, open list

The Linksys WRT1900ACS (Shelby) is another Armada 385 based router in
the Linksys WRT AC Series which got released in October 2015.

The file armada-385-linksys-shelby.dts is taken from OpenWrt as-is and
originally authored by Imre Kaloz.

URL: https://github.com/openwrt/openwrt/blob/8466384db1154a107b86bf3ca10b166a21bd81d0/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-shelby.dts
CC: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>
---

Notes:
    V1 -> V2:
    - Use full instead of shortened URL in commit message (suggested by Jason Cooper)
    - add collected tags, thanks to donors ;)

 arch/arm/boot/dts/Makefile                      |   1 +
 arch/arm/boot/dts/armada-385-linksys-shelby.dts | 114 ++++++++++++++++++++++++
 2 files changed, 115 insertions(+)
 create mode 100644 arch/arm/boot/dts/armada-385-linksys-shelby.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0118084..16f1748 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -970,6 +970,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
 	armada-385-db-ap.dtb \
 	armada-385-linksys-caiman.dtb \
 	armada-385-linksys-cobra.dtb \
+	armada-385-linksys-shelby.dtb \
 	armada-385-turris-omnia.dtb \
 	armada-388-clearfog.dtb \
 	armada-388-clearfog-base.dtb \
diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
new file mode 100644
index 0000000..c7a8ddd
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
@@ -0,0 +1,114 @@
+/*
+ * Device Tree file for the Linksys WRT1900ACS (Shelby)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT1900ACS";
+	compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+
+	soc {
+		internal-regs{
+			i2c@11000 {
+
+				pca9635@68 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+					wan_amber@0 {
+						label = "shelby:amber:wan";
+						reg = <0x0>;
+					};
+
+					wan_white@1 {
+						label = "shelby:white:wan";
+						reg = <0x1>;
+					};
+
+					wlan_2g@2 {
+						label = "shelby:white:wlan_2g";
+						reg = <0x2>;
+					};
+
+					wlan_5g@3 {
+						label = "shelby:white:wlan_5g";
+						reg = <0x3>;
+					};
+
+					usb2@5 {
+						label = "shelby:white:usb2";
+						reg = <0x5>;
+					};
+
+					usb3_1@6 {
+						label = "shelby:white:usb3_1";
+						reg = <0x6>;
+					};
+
+					usb3_2@7 {
+						label = "shelby:white:usb3_2";
+						reg = <0x7>;
+					};
+
+					wps_white@8 {
+						label = "shelby:white:wps";
+						reg = <0x8>;
+					};
+
+					wps_amber@9 {
+						label = "shelby:amber:wps";
+						reg = <0x9>;
+					};
+				};
+			};
+		};
+	};
+
+	gpio-leds {
+		power {
+			label = "shelby:white:power";
+		};
+
+		sata {
+			label = "shelby:white:sata";
+		};
+	};
+};
-- 
2.10.2

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
  2017-02-14 19:17 [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby) Ralph Sennhauser
@ 2017-02-15 15:18 ` Gregory CLEMENT
  2017-03-07 17:27   ` Gregory CLEMENT
  0 siblings, 1 reply; 5+ messages in thread
From: Gregory CLEMENT @ 2017-02-15 15:18 UTC (permalink / raw)
  To: Ralph Sennhauser
  Cc: Imre Kaloz, Rob Herring, Mark Rutland, Russell King,
	Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	moderated list:ARM PORT, open list

Hi Ralph,
 
 On mar., févr. 14 2017, Ralph Sennhauser <ralph.sennhauser@gmail.com> wrote:

> The Linksys WRT1900ACS (Shelby) is another Armada 385 based router in
> the Linksys WRT AC Series which got released in October 2015.
>
> The file armada-385-linksys-shelby.dts is taken from OpenWrt as-is and
> originally authored by Imre Kaloz.
>
> URL: https://github.com/openwrt/openwrt/blob/8466384db1154a107b86bf3ca10b166a21bd81d0/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> CC: Imre Kaloz <kaloz@openwrt.org>
> Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
> Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> Acked-by: Jason Cooper <jason@lakedaemon.net>

Applied on mvebu/dt-4.12

Thanks,

Gregory

> ---
>
> Notes:
>     V1 -> V2:
>     - Use full instead of shortened URL in commit message (suggested by Jason Cooper)
>     - add collected tags, thanks to donors ;)
>
>  arch/arm/boot/dts/Makefile                      |   1 +
>  arch/arm/boot/dts/armada-385-linksys-shelby.dts | 114 ++++++++++++++++++++++++
>  2 files changed, 115 insertions(+)
>  create mode 100644 arch/arm/boot/dts/armada-385-linksys-shelby.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 0118084..16f1748 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -970,6 +970,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
>  	armada-385-db-ap.dtb \
>  	armada-385-linksys-caiman.dtb \
>  	armada-385-linksys-cobra.dtb \
> +	armada-385-linksys-shelby.dtb \
>  	armada-385-turris-omnia.dtb \
>  	armada-388-clearfog.dtb \
>  	armada-388-clearfog-base.dtb \
> diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> new file mode 100644
> index 0000000..c7a8ddd
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> @@ -0,0 +1,114 @@
> +/*
> + * Device Tree file for the Linksys WRT1900ACS (Shelby)
> + *
> + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
> + *
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is licensed under the terms of the GNU General Public
> + *     License version 2.  This program is licensed "as is" without
> + *     any warranty of any kind, whether express or implied.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "armada-385-linksys.dtsi"
> +
> +/ {
> +	model = "Linksys WRT1900ACS";
> +	compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
> +		     "marvell,armada380";
> +
> +	soc {
> +		internal-regs{
> +			i2c@11000 {
> +
> +				pca9635@68 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +					wan_amber@0 {
> +						label = "shelby:amber:wan";
> +						reg = <0x0>;
> +					};
> +
> +					wan_white@1 {
> +						label = "shelby:white:wan";
> +						reg = <0x1>;
> +					};
> +
> +					wlan_2g@2 {
> +						label = "shelby:white:wlan_2g";
> +						reg = <0x2>;
> +					};
> +
> +					wlan_5g@3 {
> +						label = "shelby:white:wlan_5g";
> +						reg = <0x3>;
> +					};
> +
> +					usb2@5 {
> +						label = "shelby:white:usb2";
> +						reg = <0x5>;
> +					};
> +
> +					usb3_1@6 {
> +						label = "shelby:white:usb3_1";
> +						reg = <0x6>;
> +					};
> +
> +					usb3_2@7 {
> +						label = "shelby:white:usb3_2";
> +						reg = <0x7>;
> +					};
> +
> +					wps_white@8 {
> +						label = "shelby:white:wps";
> +						reg = <0x8>;
> +					};
> +
> +					wps_amber@9 {
> +						label = "shelby:amber:wps";
> +						reg = <0x9>;
> +					};
> +				};
> +			};
> +		};
> +	};
> +
> +	gpio-leds {
> +		power {
> +			label = "shelby:white:power";
> +		};
> +
> +		sata {
> +			label = "shelby:white:sata";
> +		};
> +	};
> +};
> -- 
> 2.10.2
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
  2017-02-15 15:18 ` Gregory CLEMENT
@ 2017-03-07 17:27   ` Gregory CLEMENT
  2017-03-07 17:48     ` Ralph Sennhauser
  0 siblings, 1 reply; 5+ messages in thread
From: Gregory CLEMENT @ 2017-03-07 17:27 UTC (permalink / raw)
  To: Ralph Sennhauser
  Cc: Mark Rutland, Andrew Lunn, Jason Cooper,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Russell King, open list, Rob Herring, Imre Kaloz,
	moderated list:ARM PORT, Sebastian Hesselbarth

Hi Gregory,
 
 On mer., févr. 15 2017, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:

> Hi Ralph,
>  
>  On mar., févr. 14 2017, Ralph Sennhauser <ralph.sennhauser@gmail.com> wrote:
>
>> The Linksys WRT1900ACS (Shelby) is another Armada 385 based router in
>> the Linksys WRT AC Series which got released in October 2015.
>>
>> The file armada-385-linksys-shelby.dts is taken from OpenWrt as-is and
>> originally authored by Imre Kaloz.
>>
>> URL: https://github.com/openwrt/openwrt/blob/8466384db1154a107b86bf3ca10b166a21bd81d0/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-shelby.dts
>> CC: Imre Kaloz <kaloz@openwrt.org>
>> Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
>> Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
>> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
>> Acked-by: Jason Cooper <jason@lakedaemon.net>
>
> Applied on mvebu/dt-4.12

It is now in mvebu/dt and in the same time I fixed the title to:
"ARM: dts: armada-385: add support for the Linksys WRT1900ACS (Shelby)"

Gregory

>
> Thanks,
>
> Gregory
>
>> ---
>>
>> Notes:
>>     V1 -> V2:
>>     - Use full instead of shortened URL in commit message (suggested by Jason Cooper)
>>     - add collected tags, thanks to donors ;)
>>
>>  arch/arm/boot/dts/Makefile                      |   1 +
>>  arch/arm/boot/dts/armada-385-linksys-shelby.dts | 114 ++++++++++++++++++++++++
>>  2 files changed, 115 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/armada-385-linksys-shelby.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 0118084..16f1748 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -970,6 +970,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
>>  	armada-385-db-ap.dtb \
>>  	armada-385-linksys-caiman.dtb \
>>  	armada-385-linksys-cobra.dtb \
>> +	armada-385-linksys-shelby.dtb \
>>  	armada-385-turris-omnia.dtb \
>>  	armada-388-clearfog.dtb \
>>  	armada-388-clearfog-base.dtb \
>> diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
>> new file mode 100644
>> index 0000000..c7a8ddd
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
>> @@ -0,0 +1,114 @@
>> +/*
>> + * Device Tree file for the Linksys WRT1900ACS (Shelby)
>> + *
>> + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
>> + *
>> + *
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + *  a) This file is licensed under the terms of the GNU General Public
>> + *     License version 2.  This program is licensed "as is" without
>> + *     any warranty of any kind, whether express or implied.
>> + *
>> + * Or, alternatively,
>> + *
>> + *  b) Permission is hereby granted, free of charge, to any person
>> + *     obtaining a copy of this software and associated documentation
>> + *     files (the "Software"), to deal in the Software without
>> + *     restriction, including without limitation the rights to use,
>> + *     copy, modify, merge, publish, distribute, sublicense, and/or
>> + *     sell copies of the Software, and to permit persons to whom the
>> + *     Software is furnished to do so, subject to the following
>> + *     conditions:
>> + *
>> + *     The above copyright notice and this permission notice shall be
>> + *     included in all copies or substantial portions of the Software.
>> + *
>> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + *     OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +/dts-v1/;
>> +#include "armada-385-linksys.dtsi"
>> +
>> +/ {
>> +	model = "Linksys WRT1900ACS";
>> +	compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
>> +		     "marvell,armada380";
>> +
>> +	soc {
>> +		internal-regs{
>> +			i2c@11000 {
>> +
>> +				pca9635@68 {
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +
>> +					wan_amber@0 {
>> +						label = "shelby:amber:wan";
>> +						reg = <0x0>;
>> +					};
>> +
>> +					wan_white@1 {
>> +						label = "shelby:white:wan";
>> +						reg = <0x1>;
>> +					};
>> +
>> +					wlan_2g@2 {
>> +						label = "shelby:white:wlan_2g";
>> +						reg = <0x2>;
>> +					};
>> +
>> +					wlan_5g@3 {
>> +						label = "shelby:white:wlan_5g";
>> +						reg = <0x3>;
>> +					};
>> +
>> +					usb2@5 {
>> +						label = "shelby:white:usb2";
>> +						reg = <0x5>;
>> +					};
>> +
>> +					usb3_1@6 {
>> +						label = "shelby:white:usb3_1";
>> +						reg = <0x6>;
>> +					};
>> +
>> +					usb3_2@7 {
>> +						label = "shelby:white:usb3_2";
>> +						reg = <0x7>;
>> +					};
>> +
>> +					wps_white@8 {
>> +						label = "shelby:white:wps";
>> +						reg = <0x8>;
>> +					};
>> +
>> +					wps_amber@9 {
>> +						label = "shelby:amber:wps";
>> +						reg = <0x9>;
>> +					};
>> +				};
>> +			};
>> +		};
>> +	};
>> +
>> +	gpio-leds {
>> +		power {
>> +			label = "shelby:white:power";
>> +		};
>> +
>> +		sata {
>> +			label = "shelby:white:sata";
>> +		};
>> +	};
>> +};
>> -- 
>> 2.10.2
>>
>
> -- 
> Gregory Clement, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
  2017-03-07 17:27   ` Gregory CLEMENT
@ 2017-03-07 17:48     ` Ralph Sennhauser
  2017-03-08  8:54       ` Gregory CLEMENT
  0 siblings, 1 reply; 5+ messages in thread
From: Ralph Sennhauser @ 2017-03-07 17:48 UTC (permalink / raw)
  To: Gregory CLEMENT
  Cc: Mark Rutland, Andrew Lunn, Jason Cooper,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Russell King, open list, Rob Herring, Imre Kaloz,
	moderated list:ARM PORT, Sebastian Hesselbarth

On Tue, 07 Mar 2017 18:27:21 +0100
Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
> 
> It is now in mvebu/dt and in the same time I fixed the title to:
> "ARM: dts: armada-385: add support for the Linksys WRT1900ACS
> (Shelby)"
> 
> Gregory
> 

Thanks
Ralph

PS: The sort order got mixed with armada-385-synology-ds116.dtb while
merging which got added minutes earlier in arch/arm/boot/dts/Makefile.

PPS: There was also the request of using SPDX tags to v1 after v2 got
merged from Rob Herring and a no by Russell King. I took it as no
action required, you might want to have a look though.

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
  2017-03-07 17:48     ` Ralph Sennhauser
@ 2017-03-08  8:54       ` Gregory CLEMENT
  0 siblings, 0 replies; 5+ messages in thread
From: Gregory CLEMENT @ 2017-03-08  8:54 UTC (permalink / raw)
  To: Ralph Sennhauser
  Cc: Mark Rutland, Andrew Lunn, Jason Cooper,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Russell King, open list, Rob Herring, Imre Kaloz,
	moderated list:ARM PORT, Sebastian Hesselbarth

Hi Ralph,
 
 On mar., mars 07 2017, Ralph Sennhauser <ralph.sennhauser@gmail.com> wrote:

> On Tue, 07 Mar 2017 18:27:21 +0100
> Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
>> 
>> It is now in mvebu/dt and in the same time I fixed the title to:
>> "ARM: dts: armada-385: add support for the Linksys WRT1900ACS
>> (Shelby)"
>> 
>> Gregory
>> 
>
> Thanks
> Ralph
>
> PS: The sort order got mixed with armada-385-synology-ds116.dtb while
> merging which got added minutes earlier in arch/arm/boot/dts/Makefile.

Thanks for info, I've fixed it now.

>
> PPS: There was also the request of using SPDX tags to v1 after v2 got
> merged from Rob Herring and a no by Russell King. I took it as no
> action required, you might want to have a look though.

I saw this and it was the first time I see this kind of request about
SPDX tags. Given the answer from Russell Kng I don't plan to do
anything for now.

Thanks,

Gregory

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2017-03-08  9:02 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-14 19:17 [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby) Ralph Sennhauser
2017-02-15 15:18 ` Gregory CLEMENT
2017-03-07 17:27   ` Gregory CLEMENT
2017-03-07 17:48     ` Ralph Sennhauser
2017-03-08  8:54       ` Gregory CLEMENT

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).