From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-kernel@vger.kernel.org
Subject: [PATCH] rapidio: use is_visible() to hide switch-specific attributes
Date: Tue, 14 Feb 2017 12:22:46 -0800 [thread overview]
Message-ID: <20170214202246.GA25152@dtor-ws> (raw)
Instead of creating switch-specific attributes by hand, implement
is_visible() method of attribute group and hide them when dealing with
non-switch devices. This will ensure that all attributes are created
together, before userspace gets notified of new device.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
Not tested on hardware, compiled only.
drivers/rapidio/rio-sysfs.c | 76 ++++++++++++++++++++-------------------------
drivers/rapidio/rio.c | 3 --
drivers/rapidio/rio.h | 2 --
3 files changed, 33 insertions(+), 48 deletions(-)
diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c
index eda41563d06d..73e4b407f162 100644
--- a/drivers/rapidio/rio-sysfs.c
+++ b/drivers/rapidio/rio-sysfs.c
@@ -108,15 +108,11 @@ static struct attribute *rio_dev_attrs[] = {
&dev_attr_lprev.attr,
&dev_attr_destid.attr,
&dev_attr_modalias.attr,
- NULL,
-};
-static const struct attribute_group rio_dev_group = {
- .attrs = rio_dev_attrs,
-};
-
-const struct attribute_group *rio_dev_groups[] = {
- &rio_dev_group,
+ /* Switch-only attributes */
+ &dev_attr_routes.attr,
+ &dev_attr_lnext.attr,
+ &dev_attr_hopcount.attr,
NULL,
};
@@ -259,46 +255,40 @@ static struct bin_attribute rio_config_attr = {
.write = rio_write_config,
};
-/**
- * rio_create_sysfs_dev_files - create RIO specific sysfs files
- * @rdev: device whose entries should be created
- *
- * Create files when @rdev is added to sysfs.
- */
-int rio_create_sysfs_dev_files(struct rio_dev *rdev)
-{
- int err = 0;
-
- err = device_create_bin_file(&rdev->dev, &rio_config_attr);
+static struct bin_attribute *rio_dev_bin_attrs[] = {
+ &rio_config_attr,
+ NULL,
+};
- if (!err && (rdev->pef & RIO_PEF_SWITCH)) {
- err |= device_create_file(&rdev->dev, &dev_attr_routes);
- err |= device_create_file(&rdev->dev, &dev_attr_lnext);
- err |= device_create_file(&rdev->dev, &dev_attr_hopcount);
+static umode_t rio_dev_is_attr_visible(struct kobject *kobj,
+ struct attribute *attr, int n)
+{
+ struct rio_dev *rdev = to_rio_dev(kobj_to_dev(kobj));
+ umode_t mode = attr->mode;
+
+ if (!(rdev->pef & RIO_PEF_SWITCH) &&
+ (attr == &dev_attr_routes.attr ||
+ attr == &dev_attr_lnext.attr ||
+ attr == &dev_attr_hopcount.attr)) {
+ /*
+ * Hide switch-specific attributes for a non-switch device.
+ */
+ mode = 0;
}
- if (err)
- pr_warning("RIO: Failed to create attribute file(s) for %s\n",
- rio_name(rdev));
-
- return err;
+ return mode;
}
-/**
- * rio_remove_sysfs_dev_files - cleanup RIO specific sysfs files
- * @rdev: device whose entries we should free
- *
- * Cleanup when @rdev is removed from sysfs.
- */
-void rio_remove_sysfs_dev_files(struct rio_dev *rdev)
-{
- device_remove_bin_file(&rdev->dev, &rio_config_attr);
- if (rdev->pef & RIO_PEF_SWITCH) {
- device_remove_file(&rdev->dev, &dev_attr_routes);
- device_remove_file(&rdev->dev, &dev_attr_lnext);
- device_remove_file(&rdev->dev, &dev_attr_hopcount);
- }
-}
+static const struct attribute_group rio_dev_group = {
+ .attrs = rio_dev_attrs,
+ .is_visible = rio_dev_is_attr_visible,
+ .bin_attrs = rio_dev_bin_attrs,
+};
+
+const struct attribute_group *rio_dev_groups[] = {
+ &rio_dev_group,
+ NULL,
+};
static ssize_t bus_scan_store(struct bus_type *bus, const char *buf,
size_t count)
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 37042858c2db..38d949405618 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -192,8 +192,6 @@ int rio_add_device(struct rio_dev *rdev)
}
spin_unlock(&rio_global_list_lock);
- rio_create_sysfs_dev_files(rdev);
-
return 0;
}
EXPORT_SYMBOL_GPL(rio_add_device);
@@ -220,7 +218,6 @@ void rio_del_device(struct rio_dev *rdev, enum rio_device_state state)
}
}
spin_unlock(&rio_global_list_lock);
- rio_remove_sysfs_dev_files(rdev);
device_unregister(&rdev->dev);
}
EXPORT_SYMBOL_GPL(rio_del_device);
diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h
index 9796b3fee70d..b2abf8576397 100644
--- a/drivers/rapidio/rio.h
+++ b/drivers/rapidio/rio.h
@@ -27,8 +27,6 @@ extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
u8 hopcount, u32 from);
extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid,
u8 hopcount);
-extern int rio_create_sysfs_dev_files(struct rio_dev *rdev);
-extern void rio_remove_sysfs_dev_files(struct rio_dev *rdev);
extern int rio_lock_device(struct rio_mport *port, u16 destid,
u8 hopcount, int wait_ms);
extern int rio_unlock_device(struct rio_mport *port, u16 destid, u8 hopcount);
--
2.11.0.483.g087da7b7c-goog
--
Dmitry
next reply other threads:[~2017-02-14 20:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-14 20:22 Dmitry Torokhov [this message]
2017-02-15 2:22 ` [PATCH] rapidio: use is_visible() to hide switch-specific attributes kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170214202246.GA25152@dtor-ws \
--to=dmitry.torokhov@gmail.com \
--cc=alexandre.bounine@idt.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mporter@kernel.crashing.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).