linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Michael Hennerich <michael.hennerich@analog.com>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/4] Input: ad7879 - return plain error code from ad7879_probe()
Date: Tue, 28 Feb 2017 14:08:46 -0800	[thread overview]
Message-ID: <20170228220848.31185-2-dmitry.torokhov@gmail.com> (raw)
In-Reply-To: <20170228220848.31185-1-dmitry.torokhov@gmail.com>

With the switch to devm, there is no need for ad7879_probe() to return the
touchscreen structure, we can use plain error code. This also fixes issue
introduced with devm concersion, where we returned 0 on success (which
worked OK since IS_ERR(0) would not trigger, but was not correct
regardless).

Fixes: 381f688eee3d ("Input: ad7879 - use more devm interfaces")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/touchscreen/ad7879-i2c.c |  9 ++-------
 drivers/input/touchscreen/ad7879-spi.c |  7 +------
 drivers/input/touchscreen/ad7879.c     | 28 ++++++++++++++--------------
 drivers/input/touchscreen/ad7879.h     |  5 ++---
 4 files changed, 19 insertions(+), 30 deletions(-)

diff --git a/drivers/input/touchscreen/ad7879-i2c.c b/drivers/input/touchscreen/ad7879-i2c.c
index a282d1c9e2c6..49b902b10c5f 100644
--- a/drivers/input/touchscreen/ad7879-i2c.c
+++ b/drivers/input/touchscreen/ad7879-i2c.c
@@ -27,7 +27,6 @@ static const struct regmap_config ad7879_i2c_regmap_config = {
 static int ad7879_i2c_probe(struct i2c_client *client,
 				      const struct i2c_device_id *id)
 {
-	struct ad7879 *ts;
 	struct regmap *regmap;
 
 	if (!i2c_check_functionality(client->adapter,
@@ -40,12 +39,8 @@ static int ad7879_i2c_probe(struct i2c_client *client,
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 
-	ts = ad7879_probe(&client->dev, regmap, client->irq,
-			  BUS_I2C, AD7879_DEVID);
-	if (IS_ERR(ts))
-		return PTR_ERR(ts);
-
-	return 0;
+	return ad7879_probe(&client->dev, regmap, client->irq,
+			    BUS_I2C, AD7879_DEVID);
 }
 
 static const struct i2c_device_id ad7879_id[] = {
diff --git a/drivers/input/touchscreen/ad7879-spi.c b/drivers/input/touchscreen/ad7879-spi.c
index 59486ccba37d..3457a5626d75 100644
--- a/drivers/input/touchscreen/ad7879-spi.c
+++ b/drivers/input/touchscreen/ad7879-spi.c
@@ -32,7 +32,6 @@ static const struct regmap_config ad7879_spi_regmap_config = {
 
 static int ad7879_spi_probe(struct spi_device *spi)
 {
-	struct ad7879 *ts;
 	struct regmap *regmap;
 
 	/* don't exceed max specified SPI CLK frequency */
@@ -45,11 +44,7 @@ static int ad7879_spi_probe(struct spi_device *spi)
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 
-	ts = ad7879_probe(&spi->dev, regmap, spi->irq, BUS_SPI, AD7879_DEVID);
-	if (IS_ERR(ts))
-		return PTR_ERR(ts);
-
-	return 0;
+	return ad7879_probe(&spi->dev, regmap, spi->irq, BUS_SPI, AD7879_DEVID);
 }
 
 #ifdef CONFIG_OF
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index 52daaa4edc67..7118f611e222 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -531,8 +531,8 @@ static void ad7879_cleanup_sysfs(void *_ts)
 	sysfs_remove_group(&ts->dev->kobj, &ad7879_attr_group);
 }
 
-struct ad7879 *ad7879_probe(struct device *dev, struct regmap *regmap,
-			    int irq, u16 bustype, u8 devid)
+int ad7879_probe(struct device *dev, struct regmap *regmap,
+		 int irq, u16 bustype, u8 devid)
 {
 	struct ad7879_platform_data *pdata = dev_get_platdata(dev);
 	struct ad7879 *ts;
@@ -542,12 +542,12 @@ struct ad7879 *ad7879_probe(struct device *dev, struct regmap *regmap,
 
 	if (irq <= 0) {
 		dev_err(dev, "No IRQ specified\n");
-		return ERR_PTR(-EINVAL);
+		return -EINVAL;
 	}
 
 	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
 	if (!ts)
-		return ERR_PTR(-ENOMEM);
+		return -ENOMEM;
 
 	if (pdata) {
 		/* Platform data use swapped axis (backward compatibility) */
@@ -564,13 +564,13 @@ struct ad7879 *ad7879_probe(struct device *dev, struct regmap *regmap,
 		ad7879_parse_dt(dev, ts);
 	} else {
 		dev_err(dev, "No platform data\n");
-		return ERR_PTR(-EINVAL);
+		return -EINVAL;
 	}
 
 	input_dev = devm_input_allocate_device(dev);
 	if (!input_dev) {
 		dev_err(dev, "Failed to allocate input device\n");
-		return ERR_PTR(-ENOMEM);
+		return -ENOMEM;
 	}
 
 	ts->dev = dev;
@@ -618,14 +618,14 @@ struct ad7879 *ad7879_probe(struct device *dev, struct regmap *regmap,
 		touchscreen_parse_properties(input_dev, false, NULL);
 		if (!input_abs_get_max(input_dev, ABS_PRESSURE)) {
 			dev_err(dev, "Touchscreen pressure is not specified\n");
-			return ERR_PTR(-EINVAL);
+			return -EINVAL;
 		}
 	}
 
 	err = ad7879_write(ts, AD7879_REG_CTRL2, AD7879_RESET);
 	if (err < 0) {
 		dev_err(dev, "Failed to write %s\n", input_dev->name);
-		return ERR_PTR(err);
+		return err;
 	}
 
 	revid = ad7879_read(ts, AD7879_REG_REVID);
@@ -634,7 +634,7 @@ struct ad7879 *ad7879_probe(struct device *dev, struct regmap *regmap,
 	if (input_dev->id.product != devid) {
 		dev_err(dev, "Failed to probe %s (%x vs %x)\n",
 			input_dev->name, devid, revid);
-		return ERR_PTR(-ENODEV);
+		return -ENODEV;
 	}
 
 	ts->cmd_crtl3 = AD7879_YPLUS_BIT |
@@ -659,26 +659,26 @@ struct ad7879 *ad7879_probe(struct device *dev, struct regmap *regmap,
 					dev_name(dev), ts);
 	if (err) {
 		dev_err(dev, "Failed to request IRQ: %d\n", err);
-		return ERR_PTR(err);
+		return err;
 	}
 
 	__ad7879_disable(ts);
 
 	err = sysfs_create_group(&dev->kobj, &ad7879_attr_group);
 	if (err)
-		return ERR_PTR(err);
+		return err;
 
 	err = devm_add_action_or_reset(dev, ad7879_cleanup_sysfs, ts);
 	if (err)
-		return ERR_PTR(err);
+		return err;
 
 	err = ad7879_gpio_add(ts, pdata);
 	if (err)
-		return ERR_PTR(err);
+		return err;
 
 	err = input_register_device(input_dev);
 	if (err)
-		return ERR_PTR(err);
+		return err;
 
 	dev_set_drvdata(dev, ts);
 
diff --git a/drivers/input/touchscreen/ad7879.h b/drivers/input/touchscreen/ad7879.h
index d3d2e9dc31ae..7e43066a4b68 100644
--- a/drivers/input/touchscreen/ad7879.h
+++ b/drivers/input/touchscreen/ad7879.h
@@ -11,13 +11,12 @@
 
 #include <linux/types.h>
 
-struct ad7879;
 struct device;
 struct regmap;
 
 extern const struct dev_pm_ops ad7879_pm_ops;
 
-struct ad7879 *ad7879_probe(struct device *dev, struct regmap *regmap,
-			    int irq, u16 bustype, u8 devid);
+int ad7879_probe(struct device *dev, struct regmap *regmap,
+		 int irq, u16 bustype, u8 devid);
 
 #endif
-- 
2.11.0.483.g087da7b7c-goog

  reply	other threads:[~2017-02-28 22:16 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-28 22:08 [PATCH 1/4] Input: ad7879 - make sure we set up drvdata Dmitry Torokhov
2017-02-28 22:08 ` Dmitry Torokhov [this message]
2017-03-01  7:40   ` [PATCH 2/4] Input: ad7879 - return plain error code from ad7879_probe() Michael Hennerich
2017-02-28 22:08 ` [PATCH 3/4] Input: ad7879 - try parsing properties on non-DT systems Dmitry Torokhov
2017-03-01  7:38   ` Michael Hennerich
2017-02-28 22:08 ` [PATCH 4/4] Input: ad7879 - do not manipulate capability bits directly Dmitry Torokhov
2017-03-01  7:37   ` Michael Hennerich
2017-03-01  7:40 ` [PATCH 1/4] Input: ad7879 - make sure we set up drvdata Michael Hennerich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170228220848.31185-2-dmitry.torokhov@gmail.com \
    --to=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael.hennerich@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).