* [PATCH] powerpc/8xx: Adding support of IRQ in MPC8xx GPIO
@ 2017-03-09 9:42 Christophe Leroy
2017-04-30 6:48 ` Scott Wood
0 siblings, 1 reply; 4+ messages in thread
From: Christophe Leroy @ 2017-03-09 9:42 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, Scott Wood
Cc: linux-kernel, linuxppc-dev
This patch allows the use of IRQ to notify the change of GPIO status
on MPC8xx CPM IO ports. This then allows to associate IRQs to GPIOs
in the Device Tree.
Ex:
CPM1_PIO_C: gpio-controller@960 {
#gpio-cells = <2>;
compatible = "fsl,cpm1-pario-bank-c";
reg = <0x960 0x10>;
interrupts = <1 2 6 9 10 11 14 15 23 24 26 31>;
interrupts-mask = <0x0fff>;
interrupt-parent = <&CPM_PIC>;
gpio-controller;
};
The property 'interrupts-mask' defines which of the 16 GPIOs have
the associated interrupts defined in the 'interrupts' property.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/include/asm/cpm1.h | 2 ++
arch/powerpc/sysdev/cpm1.c | 25 +++++++++++++++++++++++++
2 files changed, 27 insertions(+)
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 8ee4211ca0c6..14ad37865000 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -560,6 +560,8 @@ typedef struct risc_timer_pram {
#define CPM_PIN_SECONDARY 2
#define CPM_PIN_GPIO 4
#define CPM_PIN_OPENDRAIN 8
+#define CPM_PIN_FALLEDGE 16
+#define CPM_PIN_ANYEDGE 0
enum cpm_port {
CPM_PORTA,
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 986cd111d4df..dc3653da6dd1 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -377,6 +377,10 @@ static void cpm1_set_pin16(int port, int pin, int flags)
setbits16(&iop->odr_sor, pin);
else
clrbits16(&iop->odr_sor, pin);
+ if (flags & CPM_PIN_FALLEDGE)
+ setbits16(&iop->intr, pin);
+ else
+ clrbits16(&iop->intr, pin);
}
}
@@ -528,6 +532,9 @@ struct cpm1_gpio16_chip {
/* shadowed data register to clear/set bits safely */
u16 cpdata;
+
+ /* IRQ associated with Pins when relevant */
+ int irq[16];
};
static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc)
@@ -578,6 +585,14 @@ static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
spin_unlock_irqrestore(&cpm1_gc->lock, flags);
}
+static int cpm1_gpio16_to_irq(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
+
+ return cpm1_gc->irq[gpio] ? : -ENXIO;
+}
+
static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
@@ -618,6 +633,7 @@ int cpm1_gpiochip_add16(struct device_node *np)
struct cpm1_gpio16_chip *cpm1_gc;
struct of_mm_gpio_chip *mm_gc;
struct gpio_chip *gc;
+ u16 mask;
cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
if (!cpm1_gc)
@@ -625,6 +641,14 @@ int cpm1_gpiochip_add16(struct device_node *np)
spin_lock_init(&cpm1_gc->lock);
+ if (!of_property_read_u16(np, "interrupts-mask", &mask)) {
+ int i, j;
+
+ for (i = 0, j = 0; i < 16; i++)
+ if (mask & (1 << (15 - i)))
+ cpm1_gc->irq[i] = irq_of_parse_and_map(np, j++);
+ }
+
mm_gc = &cpm1_gc->mm_gc;
gc = &mm_gc->gc;
@@ -634,6 +658,7 @@ int cpm1_gpiochip_add16(struct device_node *np)
gc->direction_output = cpm1_gpio16_dir_out;
gc->get = cpm1_gpio16_get;
gc->set = cpm1_gpio16_set;
+ gc->to_irq = cpm1_gpio16_to_irq;
return of_mm_gpiochip_add_data(np, mm_gc, cpm1_gc);
}
--
2.12.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: powerpc/8xx: Adding support of IRQ in MPC8xx GPIO
2017-03-09 9:42 [PATCH] powerpc/8xx: Adding support of IRQ in MPC8xx GPIO Christophe Leroy
@ 2017-04-30 6:48 ` Scott Wood
2017-05-01 7:46 ` christophe leroy
0 siblings, 1 reply; 4+ messages in thread
From: Scott Wood @ 2017-04-30 6:48 UTC (permalink / raw)
To: Christophe Leroy
Cc: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
linuxppc-dev, linux-kernel
On Thu, Mar 09, 2017 at 10:42:04AM +0100, Christophe Leroy wrote:
> This patch allows the use of IRQ to notify the change of GPIO status
> on MPC8xx CPM IO ports. This then allows to associate IRQs to GPIOs
> in the Device Tree.
>
> Ex:
> CPM1_PIO_C: gpio-controller@960 {
> #gpio-cells = <2>;
> compatible = "fsl,cpm1-pario-bank-c";
> reg = <0x960 0x10>;
> interrupts = <1 2 6 9 10 11 14 15 23 24 26 31>;
> interrupts-mask = <0x0fff>;
> interrupt-parent = <&CPM_PIC>;
> gpio-controller;
> };
>
> The property 'interrupts-mask' defines which of the 16 GPIOs have
> the associated interrupts defined in the 'interrupts' property.
Binding? Should also be named something like "fsl,cpm1-gpio-irq-mask",
> static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
> {
> struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
> @@ -618,6 +633,7 @@ int cpm1_gpiochip_add16(struct device_node *np)
> struct cpm1_gpio16_chip *cpm1_gc;
> struct of_mm_gpio_chip *mm_gc;
> struct gpio_chip *gc;
> + u16 mask;
>
> cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
> if (!cpm1_gc)
> @@ -625,6 +641,14 @@ int cpm1_gpiochip_add16(struct device_node *np)
>
> spin_lock_init(&cpm1_gc->lock);
>
> + if (!of_property_read_u16(np, "interrupts-mask", &mask)) {
> + int i, j;
> +
> + for (i = 0, j = 0; i < 16; i++)
> + if (mask & (1 << (15 - i)))
> + cpm1_gc->irq[i] = irq_of_parse_and_map(np, j++);
> + }
Do we really need to use MSB-first bit numbering here?
-Scott
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: powerpc/8xx: Adding support of IRQ in MPC8xx GPIO
2017-04-30 6:48 ` Scott Wood
@ 2017-05-01 7:46 ` christophe leroy
2017-05-01 18:14 ` Scott Wood
0 siblings, 1 reply; 4+ messages in thread
From: christophe leroy @ 2017-05-01 7:46 UTC (permalink / raw)
To: Scott Wood
Cc: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
linuxppc-dev, linux-kernel
Le 30/04/2017 à 08:48, Scott Wood a écrit :
> On Thu, Mar 09, 2017 at 10:42:04AM +0100, Christophe Leroy wrote:
>> This patch allows the use of IRQ to notify the change of GPIO status
>> on MPC8xx CPM IO ports. This then allows to associate IRQs to GPIOs
>> in the Device Tree.
>>
>> Ex:
>> CPM1_PIO_C: gpio-controller@960 {
>> #gpio-cells = <2>;
>> compatible = "fsl,cpm1-pario-bank-c";
>> reg = <0x960 0x10>;
>> interrupts = <1 2 6 9 10 11 14 15 23 24 26 31>;
>> interrupts-mask = <0x0fff>;
>> interrupt-parent = <&CPM_PIC>;
>> gpio-controller;
>> };
>>
>> The property 'interrupts-mask' defines which of the 16 GPIOs have
>> the associated interrupts defined in the 'interrupts' property.
>
> Binding? Should also be named something like "fsl,cpm1-gpio-irq-mask",
Ok, done in v2
>
>> static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
>> {
>> struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
>> @@ -618,6 +633,7 @@ int cpm1_gpiochip_add16(struct device_node *np)
>> struct cpm1_gpio16_chip *cpm1_gc;
>> struct of_mm_gpio_chip *mm_gc;
>> struct gpio_chip *gc;
>> + u16 mask;
>>
>> cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
>> if (!cpm1_gc)
>
>> @@ -625,6 +641,14 @@ int cpm1_gpiochip_add16(struct device_node *np)
>>
>> spin_lock_init(&cpm1_gc->lock);
>>
>> + if (!of_property_read_u16(np, "interrupts-mask", &mask)) {
>> + int i, j;
>> +
>> + for (i = 0, j = 0; i < 16; i++)
>> + if (mask & (1 << (15 - i)))
>> + cpm1_gc->irq[i] = irq_of_parse_and_map(np, j++);
>> + }
>
> Do we really need to use MSB-first bit numbering here?
Well, I think it is better to keep the GPIOs in the same order as in the
CPM1 registers, like everywhere else in that driver, isn't it ?
The registers have GPIO 0 in the MSB and GPIO15 in the LSB.
Christophe
---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
https://www.avast.com/antivirus
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: powerpc/8xx: Adding support of IRQ in MPC8xx GPIO
2017-05-01 7:46 ` christophe leroy
@ 2017-05-01 18:14 ` Scott Wood
0 siblings, 0 replies; 4+ messages in thread
From: Scott Wood @ 2017-05-01 18:14 UTC (permalink / raw)
To: christophe leroy
Cc: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
linuxppc-dev, linux-kernel
On Mon, 2017-05-01 at 09:46 +0200, christophe leroy wrote:
>
> Le 30/04/2017 à 08:48, Scott Wood a écrit :
> > On Thu, Mar 09, 2017 at 10:42:04AM +0100, Christophe Leroy wrote:
> > >
> > > @@ -625,6 +641,14 @@ int cpm1_gpiochip_add16(struct device_node *np)
> > >
> > > spin_lock_init(&cpm1_gc->lock);
> > >
> > > + if (!of_property_read_u16(np, "interrupts-mask", &mask)) {
> > > + int i, j;
> > > +
> > > + for (i = 0, j = 0; i < 16; i++)
> > > + if (mask & (1 << (15 - i)))
> > > + cpm1_gc->irq[i] =
> > > irq_of_parse_and_map(np, j++);
> > > + }
> >
> > Do we really need to use MSB-first bit numbering here?
>
> Well, I think it is better to keep the GPIOs in the same order as in the
> CPM1 registers, like everywhere else in that driver, isn't it ?
>
> The registers have GPIO 0 in the MSB and GPIO15 in the LSB.
OK, if there's a specific register this is reflecting that's reasonable.
-Scott
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-05-01 18:14 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-09 9:42 [PATCH] powerpc/8xx: Adding support of IRQ in MPC8xx GPIO Christophe Leroy
2017-04-30 6:48 ` Scott Wood
2017-05-01 7:46 ` christophe leroy
2017-05-01 18:14 ` Scott Wood
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).