linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 0/3] Add public w1 driver interface
@ 2017-03-16 15:19 Andrew F. Davis
  2017-03-16 15:19 ` [PATCH 1/3] w1: Use kernel common min() implementation Andrew F. Davis
                   ` (3 more replies)
  0 siblings, 4 replies; 6+ messages in thread
From: Andrew F. Davis @ 2017-03-16 15:19 UTC (permalink / raw)
  To: Evgeniy Polyakov, Greg Kroah-Hartman
  Cc: kernel-janitors, linux-kernel, Andrew F . Davis

Hi All,

As part of continuing work to cleanup the BQ27xxx driver I am attempting
to remove the need for the platform driver interface. For this we first
need the w1 subsystem to act more like a traditional bus subsystem
and allow drivers for attached devices to live outside of the w1
directory.

The first couple patches are trivial, the last a bit more involved
but should make no functional change, just a re-organization of
header files.

Thanks,
Andrew

Andrew F. Davis (3):
  w1: Use kernel common min() implementation
  w1: Remove unneeded use of assert() and remove w1_log.h
  w1: Add subsystem kernel public interface

 MAINTAINERS                        |   1 +
 drivers/w1/masters/ds1wm.c         |   3 +-
 drivers/w1/masters/ds2482.c        |   3 +-
 drivers/w1/masters/ds2490.c        |   3 +-
 drivers/w1/masters/matrox_w1.c     |   9 +--
 drivers/w1/masters/mxc_w1.c        |   3 +-
 drivers/w1/masters/omap_hdq.c      |   3 +-
 drivers/w1/masters/w1-gpio.c       |   3 +-
 drivers/w1/slaves/w1_bq27000.c     |   6 +-
 drivers/w1/slaves/w1_ds2405.c      |   5 +-
 drivers/w1/slaves/w1_ds2406.c      |   6 +-
 drivers/w1/slaves/w1_ds2408.c      |   6 +-
 drivers/w1/slaves/w1_ds2413.c      |   6 +-
 drivers/w1/slaves/w1_ds2423.c      |   6 +-
 drivers/w1/slaves/w1_ds2431.c      |   6 +-
 drivers/w1/slaves/w1_ds2433.c      |   6 +-
 drivers/w1/slaves/w1_ds2760.c      |   7 ++-
 drivers/w1/slaves/w1_ds2780.c      |   7 ++-
 drivers/w1/slaves/w1_ds2781.c      |   7 ++-
 drivers/w1/slaves/w1_ds28e04.c     |   6 +-
 drivers/w1/slaves/w1_smem.c        |   7 ++-
 drivers/w1/slaves/w1_therm.c       |  10 +++-
 drivers/w1/w1.c                    |   7 +--
 drivers/w1/w1_family.c             |   3 +-
 drivers/w1/w1_family.h             |  97 -------------------------------
 drivers/w1/w1_int.c                |   4 +-
 drivers/w1/w1_int.h                |  27 ---------
 drivers/w1/w1_internal.h           |  87 ++++++++++++++++++++++++++++
 drivers/w1/w1_io.c                 |   3 +-
 drivers/w1/w1_log.h                |  31 ----------
 drivers/w1/w1_netlink.c            |   7 +--
 drivers/w1/w1_netlink.h            |   2 +-
 {drivers/w1 => include/linux}/w1.h | 116 ++++++++++++++++---------------------
 33 files changed, 205 insertions(+), 298 deletions(-)
 delete mode 100644 drivers/w1/w1_family.h
 delete mode 100644 drivers/w1/w1_int.h
 create mode 100644 drivers/w1/w1_internal.h
 delete mode 100644 drivers/w1/w1_log.h
 rename {drivers/w1 => include/linux}/w1.h (76%)

-- 
2.11.0

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [PATCH 1/3] w1: Use kernel common min() implementation
  2017-03-16 15:19 [PATCH 0/3] Add public w1 driver interface Andrew F. Davis
@ 2017-03-16 15:19 ` Andrew F. Davis
  2017-03-16 15:19 ` [PATCH 2/3] w1: Remove unneeded use of assert() and remove w1_log.h Andrew F. Davis
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 6+ messages in thread
From: Andrew F. Davis @ 2017-03-16 15:19 UTC (permalink / raw)
  To: Evgeniy Polyakov, Greg Kroah-Hartman
  Cc: kernel-janitors, linux-kernel, Andrew F . Davis

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 drivers/w1/w1_netlink.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c
index 49e520ca79c5..18374cad3ace 100644
--- a/drivers/w1/w1_netlink.c
+++ b/drivers/w1/w1_netlink.c
@@ -23,8 +23,6 @@
 
 #if defined(CONFIG_W1_CON) && (defined(CONFIG_CONNECTOR) || (defined(CONFIG_CONNECTOR_MODULE) && defined(CONFIG_W1_MODULE)))
 
-#define MIN(a, b)                   (((a) < (b)) ? (a) : (b))
-
 /* Bundle together everything required to process a request in one memory
  * allocation.
  */
@@ -598,7 +596,7 @@ static void w1_cn_callback(struct cn_msg *cn, struct netlink_skb_parms *nsp)
 				sizeof(struct w1_netlink_msg) +
 				sizeof(struct w1_netlink_cmd));
 		}
-		reply_size = MIN(CONNECTOR_MAX_MSG_SIZE, reply_size);
+		reply_size = min(CONNECTOR_MAX_MSG_SIZE, reply_size);
 
 		/* allocate space for the block, a copy of the original message,
 		 * one node per cmd to point into the original message,
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH 2/3] w1: Remove unneeded use of assert() and remove w1_log.h
  2017-03-16 15:19 [PATCH 0/3] Add public w1 driver interface Andrew F. Davis
  2017-03-16 15:19 ` [PATCH 1/3] w1: Use kernel common min() implementation Andrew F. Davis
@ 2017-03-16 15:19 ` Andrew F. Davis
  2017-03-16 15:19 ` [PATCH 3/3] w1: Add subsystem kernel public interface Andrew F. Davis
  2017-03-25 18:47 ` [PATCH 0/3] Add public w1 driver interface Sebastian Reichel
  3 siblings, 0 replies; 6+ messages in thread
From: Andrew F. Davis @ 2017-03-16 15:19 UTC (permalink / raw)
  To: Evgeniy Polyakov, Greg Kroah-Hartman
  Cc: kernel-janitors, linux-kernel, Andrew F . Davis

The only use of assert() is in matrox_w1.c and is used to check the input
to probe() from the PCI subsystem for NULL values, these are guaranteed
to be populated and no other PCI driver makes this check, remove this.

As this was the only definition in w1_log.h, remove this also.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 drivers/w1/masters/matrox_w1.c |  6 ------
 drivers/w1/w1.c                |  1 -
 drivers/w1/w1_int.c            |  1 -
 drivers/w1/w1_io.c             |  1 -
 drivers/w1/w1_log.h            | 31 -------------------------------
 drivers/w1/w1_netlink.c        |  1 -
 6 files changed, 41 deletions(-)
 delete mode 100644 drivers/w1/w1_log.h

diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c
index cbdf4c9d895c..f20d03ecfd1d 100644
--- a/drivers/w1/masters/matrox_w1.c
+++ b/drivers/w1/masters/matrox_w1.c
@@ -36,7 +36,6 @@
 
 #include "../w1.h"
 #include "../w1_int.h"
-#include "../w1_log.h"
 
 /*
  * Matrox G400 DDC registers.
@@ -134,9 +133,6 @@ static int matrox_w1_probe(struct pci_dev *pdev, const struct pci_device_id *ent
 	struct matrox_device *dev;
 	int err;
 
-	assert(pdev != NULL);
-	assert(ent != NULL);
-
 	if (pdev->vendor != PCI_VENDOR_ID_MATROX || pdev->device != PCI_DEVICE_ID_MATROX_G400)
 		return -ENODEV;
 
@@ -201,8 +197,6 @@ static void matrox_w1_remove(struct pci_dev *pdev)
 {
 	struct matrox_device *dev = pci_get_drvdata(pdev);
 
-	assert(dev != NULL);
-
 	if (dev->found) {
 		w1_remove_master_device(dev->bus_master);
 		iounmap(dev->virt_addr);
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 281abfd369b8..8172dee5e23c 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -29,7 +29,6 @@
 #include <linux/atomic.h>
 
 #include "w1.h"
-#include "w1_log.h"
 #include "w1_int.h"
 #include "w1_family.h"
 #include "w1_netlink.h"
diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c
index 0a3b1ea25765..4439d10709bb 100644
--- a/drivers/w1/w1_int.c
+++ b/drivers/w1/w1_int.c
@@ -22,7 +22,6 @@
 #include <linux/moduleparam.h>
 
 #include "w1.h"
-#include "w1_log.h"
 #include "w1_netlink.h"
 #include "w1_int.h"
 
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index de8bebc27896..1134e6b1eb02 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -19,7 +19,6 @@
 #include <linux/module.h>
 
 #include "w1.h"
-#include "w1_log.h"
 
 static int w1_delay_parm = 1;
 module_param_named(delay_coef, w1_delay_parm, int, 0);
diff --git a/drivers/w1/w1_log.h b/drivers/w1/w1_log.h
deleted file mode 100644
index dd1422b6afbb..000000000000
--- a/drivers/w1/w1_log.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __W1_LOG_H
-#define __W1_LOG_H
-
-#define DEBUG
-
-#ifdef W1_DEBUG
-#  define assert(expr) do {} while (0)
-#else
-#  define assert(expr) \
-        if(unlikely(!(expr))) {				        \
-		pr_err("Assertion failed! %s,%s,%s,line=%d\n",	\
-		#expr, __FILE__, __func__, __LINE__);		\
-        }
-#endif
-
-#endif /* __W1_LOG_H */
-
diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c
index 18374cad3ace..027950f997d1 100644
--- a/drivers/w1/w1_netlink.c
+++ b/drivers/w1/w1_netlink.c
@@ -18,7 +18,6 @@
 #include <linux/connector.h>
 
 #include "w1.h"
-#include "w1_log.h"
 #include "w1_netlink.h"
 
 #if defined(CONFIG_W1_CON) && (defined(CONFIG_CONNECTOR) || (defined(CONFIG_CONNECTOR_MODULE) && defined(CONFIG_W1_MODULE)))
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH 3/3] w1: Add subsystem kernel public interface
  2017-03-16 15:19 [PATCH 0/3] Add public w1 driver interface Andrew F. Davis
  2017-03-16 15:19 ` [PATCH 1/3] w1: Use kernel common min() implementation Andrew F. Davis
  2017-03-16 15:19 ` [PATCH 2/3] w1: Remove unneeded use of assert() and remove w1_log.h Andrew F. Davis
@ 2017-03-16 15:19 ` Andrew F. Davis
       [not found]   ` <5478321493483316@web21g.yandex.ru>
  2017-03-25 18:47 ` [PATCH 0/3] Add public w1 driver interface Sebastian Reichel
  3 siblings, 1 reply; 6+ messages in thread
From: Andrew F. Davis @ 2017-03-16 15:19 UTC (permalink / raw)
  To: Evgeniy Polyakov, Greg Kroah-Hartman
  Cc: kernel-janitors, linux-kernel, Andrew F . Davis

Like other subsystems we should be able to define slave devices outside
of the w1 directory. To do this we move public facing interface
definitions to include/linux/w1.h and rename the internal definition
file to w1_internal.h.

As w1_family.h and w1_int.h contained almost entirely public
driver interface definitions we simply removed these files and
moved the remaining definitions into w1_internal.h.

With this we can now start to move slave devices out of w1/slaves and
into the subsystem based on the function they implement, again like
other drivers.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 MAINTAINERS                        |   1 +
 drivers/w1/masters/ds1wm.c         |   3 +-
 drivers/w1/masters/ds2482.c        |   3 +-
 drivers/w1/masters/ds2490.c        |   3 +-
 drivers/w1/masters/matrox_w1.c     |   3 +-
 drivers/w1/masters/mxc_w1.c        |   3 +-
 drivers/w1/masters/omap_hdq.c      |   3 +-
 drivers/w1/masters/w1-gpio.c       |   3 +-
 drivers/w1/slaves/w1_bq27000.c     |   6 +-
 drivers/w1/slaves/w1_ds2405.c      |   5 +-
 drivers/w1/slaves/w1_ds2406.c      |   6 +-
 drivers/w1/slaves/w1_ds2408.c      |   6 +-
 drivers/w1/slaves/w1_ds2413.c      |   6 +-
 drivers/w1/slaves/w1_ds2423.c      |   6 +-
 drivers/w1/slaves/w1_ds2431.c      |   6 +-
 drivers/w1/slaves/w1_ds2433.c      |   6 +-
 drivers/w1/slaves/w1_ds2760.c      |   7 ++-
 drivers/w1/slaves/w1_ds2780.c      |   7 ++-
 drivers/w1/slaves/w1_ds2781.c      |   7 ++-
 drivers/w1/slaves/w1_ds28e04.c     |   6 +-
 drivers/w1/slaves/w1_smem.c        |   7 ++-
 drivers/w1/slaves/w1_therm.c       |  10 +++-
 drivers/w1/w1.c                    |   6 +-
 drivers/w1/w1_family.c             |   3 +-
 drivers/w1/w1_family.h             |  97 -------------------------------
 drivers/w1/w1_int.c                |   3 +-
 drivers/w1/w1_int.h                |  27 ---------
 drivers/w1/w1_internal.h           |  87 ++++++++++++++++++++++++++++
 drivers/w1/w1_io.c                 |   2 +-
 drivers/w1/w1_netlink.c            |   2 +-
 drivers/w1/w1_netlink.h            |   2 +-
 {drivers/w1 => include/linux}/w1.h | 116 ++++++++++++++++---------------------
 32 files changed, 204 insertions(+), 254 deletions(-)
 delete mode 100644 drivers/w1/w1_family.h
 delete mode 100644 drivers/w1/w1_int.h
 create mode 100644 drivers/w1/w1_internal.h
 rename {drivers/w1 => include/linux}/w1.h (76%)

diff --git a/MAINTAINERS b/MAINTAINERS
index c265a5fe4848..ff52c1b2e167 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13500,6 +13500,7 @@ M:	Evgeniy Polyakov <zbr@ioremap.net>
 S:	Maintained
 F:	Documentation/w1/
 F:	drivers/w1/
+F:	include/linux/w1.h
 
 W83791D HARDWARE MONITORING DRIVER
 M:	Marc Hulsman <m.hulsman@tudelft.nl>
diff --git a/drivers/w1/masters/ds1wm.c b/drivers/w1/masters/ds1wm.c
index e0b8a4bc73df..fd2e9da27c4b 100644
--- a/drivers/w1/masters/ds1wm.c
+++ b/drivers/w1/masters/ds1wm.c
@@ -25,8 +25,7 @@
 
 #include <asm/io.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
+#include <linux/w1.h>
 
 
 #define DS1WM_CMD	0x00	/* R/W 4 bits command */
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index e8730ea3e3aa..d49681cd29af 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -20,8 +20,7 @@
 #include <linux/delay.h>
 #include <asm/delay.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
+#include <linux/w1.h>
 
 /**
  * Allow the active pullup to be disabled, default is enabled.
diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c
index d748e34d4ce5..46ccb2fc4f60 100644
--- a/drivers/w1/masters/ds2490.c
+++ b/drivers/w1/masters/ds2490.c
@@ -25,8 +25,7 @@
 #include <linux/usb.h>
 #include <linux/slab.h>
 
-#include "../w1_int.h"
-#include "../w1.h"
+#include <linux/w1.h>
 
 /* USB Standard */
 /* USB Control request vendor type */
diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c
index f20d03ecfd1d..d83d7c99d81d 100644
--- a/drivers/w1/masters/matrox_w1.c
+++ b/drivers/w1/masters/matrox_w1.c
@@ -34,8 +34,7 @@
 #include <linux/pci_ids.h>
 #include <linux/pci.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
+#include <linux/w1.h>
 
 /*
  * Matrox G400 DDC registers.
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index a4621757a47f..74f2e6e6202a 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -19,8 +19,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
+#include <linux/w1.h>
 
 /*
  * MXC W1 Register offsets
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 3302cbd2344a..3612542b6044 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -19,8 +19,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/of.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
+#include <linux/w1.h>
 
 #define	MOD_NAME	"OMAP_HDQ:"
 
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index a373ae69d9f6..a90728ceec5a 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -20,8 +20,7 @@
 #include <linux/of.h>
 #include <linux/delay.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
+#include <linux/w1.h>
 
 static u8 w1_gpio_set_pullup(void *data, int delay)
 {
diff --git a/drivers/w1/slaves/w1_bq27000.c b/drivers/w1/slaves/w1_bq27000.c
index d480900a28ab..8046ac45381a 100644
--- a/drivers/w1/slaves/w1_bq27000.c
+++ b/drivers/w1/slaves/w1_bq27000.c
@@ -17,9 +17,9 @@
 #include <linux/mutex.h>
 #include <linux/power/bq27xxx_battery.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_BQ27000	0x01
 
 #define HDQ_CMD_READ	(0)
 #define HDQ_CMD_WRITE	(1<<7)
diff --git a/drivers/w1/slaves/w1_ds2405.c b/drivers/w1/slaves/w1_ds2405.c
index d5d54876cb64..42a1e81060ce 100644
--- a/drivers/w1/slaves/w1_ds2405.c
+++ b/drivers/w1/slaves/w1_ds2405.c
@@ -24,8 +24,9 @@
 #include <linux/string.h>
 #include <linux/types.h>
 
-#include "../w1.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS2405	0x05
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Maciej S. Szmigiero <mail@maciej.szmigiero.name>");
diff --git a/drivers/w1/slaves/w1_ds2406.c b/drivers/w1/slaves/w1_ds2406.c
index 709bd5e02eed..fac266366ca3 100644
--- a/drivers/w1/slaves/w1_ds2406.c
+++ b/drivers/w1/slaves/w1_ds2406.c
@@ -17,9 +17,9 @@
 #include <linux/slab.h>
 #include <linux/crc16.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS2406	0x12
 
 #define W1_F12_FUNC_READ_STATUS		   0xAA
 #define W1_F12_FUNC_WRITE_STATUS	   0x55
diff --git a/drivers/w1/slaves/w1_ds2408.c b/drivers/w1/slaves/w1_ds2408.c
index e01d2b3997bc..b535d5ec35b6 100644
--- a/drivers/w1/slaves/w1_ds2408.c
+++ b/drivers/w1/slaves/w1_ds2408.c
@@ -15,9 +15,9 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS2408	0x29
 
 #define W1_F29_RETRIES		3
 
diff --git a/drivers/w1/slaves/w1_ds2413.c b/drivers/w1/slaves/w1_ds2413.c
index 9cc6f0bc2e95..492e3d010321 100644
--- a/drivers/w1/slaves/w1_ds2413.c
+++ b/drivers/w1/slaves/w1_ds2413.c
@@ -16,9 +16,9 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS2413	0x3A
 
 #define W1_F3A_RETRIES                     3
 #define W1_F3A_FUNC_PIO_ACCESS_READ        0xF5
diff --git a/drivers/w1/slaves/w1_ds2423.c b/drivers/w1/slaves/w1_ds2423.c
index 306240fe496c..050407c53b16 100644
--- a/drivers/w1/slaves/w1_ds2423.c
+++ b/drivers/w1/slaves/w1_ds2423.c
@@ -30,9 +30,9 @@
 #include <linux/delay.h>
 #include <linux/crc16.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_COUNTER_DS2423	0x1D
 
 #define CRC16_VALID	0xb001
 #define CRC16_INIT	0
diff --git a/drivers/w1/slaves/w1_ds2431.c b/drivers/w1/slaves/w1_ds2431.c
index 20182d4a4b19..5adecd3face1 100644
--- a/drivers/w1/slaves/w1_ds2431.c
+++ b/drivers/w1/slaves/w1_ds2431.c
@@ -16,9 +16,9 @@
 #include <linux/types.h>
 #include <linux/delay.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_EEPROM_DS2431	0x2D
 
 #define W1_F2D_EEPROM_SIZE		128
 #define W1_F2D_PAGE_COUNT		4
diff --git a/drivers/w1/slaves/w1_ds2433.c b/drivers/w1/slaves/w1_ds2433.c
index 86c30aceea3e..75ad70cfe8e8 100644
--- a/drivers/w1/slaves/w1_ds2433.c
+++ b/drivers/w1/slaves/w1_ds2433.c
@@ -22,9 +22,9 @@
 
 #endif
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_EEPROM_DS2433	0x23
 
 #define W1_EEPROM_SIZE		512
 #define W1_PAGE_COUNT		16
diff --git a/drivers/w1/slaves/w1_ds2760.c b/drivers/w1/slaves/w1_ds2760.c
index f35d1e2ef9bb..26168abfb8b8 100644
--- a/drivers/w1/slaves/w1_ds2760.c
+++ b/drivers/w1/slaves/w1_ds2760.c
@@ -18,11 +18,12 @@
 #include <linux/idr.h>
 #include <linux/gfp.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
 #include "w1_ds2760.h"
 
+#define W1_FAMILY_DS2760	0x30
+
 static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
 			int io)
 {
diff --git a/drivers/w1/slaves/w1_ds2780.c b/drivers/w1/slaves/w1_ds2780.c
index 292972212107..a60528131154 100644
--- a/drivers/w1/slaves/w1_ds2780.c
+++ b/drivers/w1/slaves/w1_ds2780.c
@@ -21,11 +21,12 @@
 #include <linux/mutex.h>
 #include <linux/idr.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
 #include "w1_ds2780.h"
 
+#define W1_FAMILY_DS2780	0x32
+
 static int w1_ds2780_do_io(struct device *dev, char *buf, int addr,
 			size_t count, int io)
 {
diff --git a/drivers/w1/slaves/w1_ds2781.c b/drivers/w1/slaves/w1_ds2781.c
index a5d75067b230..645be6e0b24a 100644
--- a/drivers/w1/slaves/w1_ds2781.c
+++ b/drivers/w1/slaves/w1_ds2781.c
@@ -18,11 +18,12 @@
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
 #include "w1_ds2781.h"
 
+#define W1_FAMILY_DS2781	0x3D
+
 static int w1_ds2781_do_io(struct device *dev, char *buf, int addr,
 			size_t count, int io)
 {
diff --git a/drivers/w1/slaves/w1_ds28e04.c b/drivers/w1/slaves/w1_ds28e04.c
index c62858c05e8f..ec234b846eb3 100644
--- a/drivers/w1/slaves/w1_ds28e04.c
+++ b/drivers/w1/slaves/w1_ds28e04.c
@@ -20,9 +20,9 @@
 #define CRC16_INIT		0
 #define CRC16_VALID		0xb001
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS28E04	0x1C
 
 /* Allow the strong pullup to be disabled, but default to enabled.
  * If it was disabled a parasite powered device might not get the required
diff --git a/drivers/w1/slaves/w1_smem.c b/drivers/w1/slaves/w1_smem.c
index 99b03bfb9941..e556b0caff71 100644
--- a/drivers/w1/slaves/w1_smem.c
+++ b/drivers/w1/slaves/w1_smem.c
@@ -27,9 +27,10 @@
 #include <linux/device.h>
 #include <linux/types.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_SMEM_01	0x01
+#define W1_FAMILY_SMEM_81	0x81
 
 static struct w1_family w1_smem_family_01 = {
 	.fid = W1_FAMILY_SMEM_01,
diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c
index ccaf29994a42..cb3fc3c6b0d1 100644
--- a/drivers/w1/slaves/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@@ -30,9 +30,13 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_THERM_DS18S20	0x10
+#define W1_THERM_DS1822		0x22
+#define W1_THERM_DS18B20	0x28
+#define W1_THERM_DS1825		0x3B
+#define W1_THERM_DS28EA00	0x42
 
 /* Allow the strong pullup to be disabled, but default to enabled.
  * If it was disabled a parasite powered device might not get the require
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 8172dee5e23c..95ea7e6b1d99 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -28,11 +28,11 @@
 
 #include <linux/atomic.h>
 
-#include "w1.h"
-#include "w1_int.h"
-#include "w1_family.h"
+#include "w1_internal.h"
 #include "w1_netlink.h"
 
+#define W1_FAMILY_DEFAULT	0
+
 static int w1_timeout = 10;
 module_param_named(timeout, w1_timeout, int, 0);
 MODULE_PARM_DESC(timeout, "time in seconds between automatic slave searches");
diff --git a/drivers/w1/w1_family.c b/drivers/w1/w1_family.c
index 9759cdaf22f4..f14ab0b340b5 100644
--- a/drivers/w1/w1_family.c
+++ b/drivers/w1/w1_family.c
@@ -18,8 +18,7 @@
 #include <linux/delay.h>
 #include <linux/export.h>
 
-#include "w1_family.h"
-#include "w1.h"
+#include "w1_internal.h"
 
 DEFINE_SPINLOCK(w1_flock);
 static LIST_HEAD(w1_families);
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h
deleted file mode 100644
index c4a6b257a367..000000000000
--- a/drivers/w1/w1_family.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __W1_FAMILY_H
-#define __W1_FAMILY_H
-
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/atomic.h>
-
-#define W1_FAMILY_DEFAULT	0
-#define W1_FAMILY_BQ27000	0x01
-#define W1_FAMILY_SMEM_01	0x01
-#define W1_FAMILY_SMEM_81	0x81
-#define W1_FAMILY_DS2405	0x05
-#define W1_THERM_DS18S20 	0x10
-#define W1_FAMILY_DS28E04	0x1C
-#define W1_COUNTER_DS2423	0x1D
-#define W1_THERM_DS1822  	0x22
-#define W1_EEPROM_DS2433  	0x23
-#define W1_THERM_DS18B20 	0x28
-#define W1_FAMILY_DS2408	0x29
-#define W1_EEPROM_DS2431	0x2D
-#define W1_FAMILY_DS2760	0x30
-#define W1_FAMILY_DS2780	0x32
-#define W1_FAMILY_DS2413	0x3A
-#define W1_FAMILY_DS2406	0x12
-#define W1_THERM_DS1825		0x3B
-#define W1_FAMILY_DS2781	0x3D
-#define W1_THERM_DS28EA00	0x42
-
-#define MAXNAMELEN		32
-
-struct w1_slave;
-
-/**
- * struct w1_family_ops - operations for a family type
- * @add_slave: add_slave
- * @remove_slave: remove_slave
- * @groups: sysfs group
- */
-struct w1_family_ops
-{
-	int  (* add_slave)(struct w1_slave *);
-	void (* remove_slave)(struct w1_slave *);
-	const struct attribute_group **groups;
-};
-
-/**
- * struct w1_family - reference counted family structure.
- * @family_entry:	family linked list
- * @fid:		8 bit family identifier
- * @fops:		operations for this family
- * @refcnt:		reference counter
- */
-struct w1_family
-{
-	struct list_head	family_entry;
-	u8			fid;
-
-	struct w1_family_ops	*fops;
-
-	atomic_t		refcnt;
-};
-
-extern spinlock_t w1_flock;
-
-void w1_family_put(struct w1_family *);
-void __w1_family_get(struct w1_family *);
-struct w1_family * w1_family_registered(u8);
-void w1_unregister_family(struct w1_family *);
-int w1_register_family(struct w1_family *);
-
-/**
- * module_w1_driver() - Helper macro for registering a 1-Wire families
- * @__w1_family: w1_family struct
- *
- * Helper macro for 1-Wire families which do not do anything special in module
- * init/exit. This eliminates a lot of boilerplate. Each module may only
- * use this macro once, and calling it replaces module_init() and module_exit()
- */
-#define module_w1_family(__w1_family) \
-	module_driver(__w1_family, w1_register_family, \
-			w1_unregister_family)
-
-#endif /* __W1_FAMILY_H */
diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c
index 4439d10709bb..1c776178f598 100644
--- a/drivers/w1/w1_int.c
+++ b/drivers/w1/w1_int.c
@@ -21,9 +21,8 @@
 #include <linux/export.h>
 #include <linux/moduleparam.h>
 
-#include "w1.h"
+#include "w1_internal.h"
 #include "w1_netlink.h"
-#include "w1_int.h"
 
 static int w1_search_count = -1; /* Default is continual scan */
 module_param_named(search_count, w1_search_count, int, 0);
diff --git a/drivers/w1/w1_int.h b/drivers/w1/w1_int.h
deleted file mode 100644
index 371989159216..000000000000
--- a/drivers/w1/w1_int.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __W1_INT_H
-#define __W1_INT_H
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-
-#include "w1.h"
-
-int w1_add_master_device(struct w1_bus_master *);
-void w1_remove_master_device(struct w1_bus_master *);
-void __w1_remove_master_device(struct w1_master *);
-
-#endif /* __W1_INT_H */
diff --git a/drivers/w1/w1_internal.h b/drivers/w1/w1_internal.h
new file mode 100644
index 000000000000..1623e2fdccc7
--- /dev/null
+++ b/drivers/w1/w1_internal.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __W1_H
+#define __W1_H
+
+#include <linux/w1.h>
+
+#include <linux/completion.h>
+#include <linux/mutex.h>
+
+#define W1_SLAVE_ACTIVE		0
+#define W1_SLAVE_DETACH		1
+
+/**
+ * struct w1_async_cmd - execute callback from the w1_process kthread
+ * @async_entry: link entry
+ * @cb: callback function, must list_del and destroy this list before
+ * returning
+ *
+ * When inserted into the w1_master async_list, w1_process will execute
+ * the callback.  Embed this into the structure with the command details.
+ */
+struct w1_async_cmd {
+	struct list_head	async_entry;
+	void (*cb)(struct w1_master *dev, struct w1_async_cmd *async_cmd);
+};
+
+int w1_create_master_attributes(struct w1_master *master);
+void w1_destroy_master_attributes(struct w1_master *master);
+void w1_search(struct w1_master *dev, u8 search_type,
+	       w1_slave_found_callback cb);
+void w1_search_devices(struct w1_master *dev, u8 search_type,
+		       w1_slave_found_callback cb);
+/* call w1_unref_slave to release the reference counts w1_search_slave added */
+struct w1_slave *w1_search_slave(struct w1_reg_num *id);
+/*
+ * decrements the reference on sl->master and sl, and cleans up if zero
+ * returns the reference count after it has been decremented
+ */
+int w1_unref_slave(struct w1_slave *sl);
+void w1_slave_found(struct w1_master *dev, u64 rn);
+void w1_search_process_cb(struct w1_master *dev, u8 search_type,
+			  w1_slave_found_callback cb);
+struct w1_slave *w1_slave_search_device(struct w1_master *dev,
+					struct w1_reg_num *rn);
+struct w1_master *w1_search_master_id(u32 id);
+
+/* Disconnect and reconnect devices in the given family.  Used for finding
+ * unclaimed devices after a family has been registered or releasing devices
+ * after a family has been unregistered.  Set attach to 1 when a new family
+ * has just been registered, to 0 when it has been unregistered.
+ */
+void w1_reconnect_slaves(struct w1_family *f, int attach);
+int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn);
+/* 0 success, otherwise EBUSY */
+int w1_slave_detach(struct w1_slave *sl);
+
+void __w1_remove_master_device(struct w1_master *dev);
+
+void w1_family_put(struct w1_family *f);
+void __w1_family_get(struct w1_family *f);
+struct w1_family *w1_family_registered(u8 fid);
+
+extern struct device_driver w1_master_driver;
+extern struct device w1_master_device;
+extern int w1_max_slave_count;
+extern int w1_max_slave_ttl;
+extern struct list_head w1_masters;
+extern struct mutex w1_mlock;
+extern spinlock_t w1_flock;
+
+int w1_process_callbacks(struct w1_master *dev);
+int w1_process(void *data);
+
+#endif /* __W1_H */
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index 1134e6b1eb02..d191e1f80579 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -18,7 +18,7 @@
 #include <linux/moduleparam.h>
 #include <linux/module.h>
 
-#include "w1.h"
+#include "w1_internal.h"
 
 static int w1_delay_parm = 1;
 module_param_named(delay_coef, w1_delay_parm, int, 0);
diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c
index 027950f997d1..f2f099caeb77 100644
--- a/drivers/w1/w1_netlink.c
+++ b/drivers/w1/w1_netlink.c
@@ -17,7 +17,7 @@
 #include <linux/netlink.h>
 #include <linux/connector.h>
 
-#include "w1.h"
+#include "w1_internal.h"
 #include "w1_netlink.h"
 
 #if defined(CONFIG_W1_CON) && (defined(CONFIG_CONNECTOR) || (defined(CONFIG_CONNECTOR_MODULE) && defined(CONFIG_W1_MODULE)))
diff --git a/drivers/w1/w1_netlink.h b/drivers/w1/w1_netlink.h
index b389e5ff5fa5..a36661cd1f05 100644
--- a/drivers/w1/w1_netlink.h
+++ b/drivers/w1/w1_netlink.h
@@ -18,7 +18,7 @@
 #include <asm/types.h>
 #include <linux/connector.h>
 
-#include "w1.h"
+#include "w1_internal.h"
 
 /**
  * enum w1_cn_msg_flags - bitfield flags for struct cn_msg.flags
diff --git a/drivers/w1/w1.h b/include/linux/w1.h
similarity index 76%
rename from drivers/w1/w1.h
rename to include/linux/w1.h
index 758a7a6322e9..a7221037ce5e 100644
--- a/drivers/w1/w1.h
+++ b/include/linux/w1.h
@@ -1,5 +1,7 @@
 /*
  * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -12,8 +14,10 @@
  * GNU General Public License for more details.
  */
 
-#ifndef __W1_H
-#define __W1_H
+#ifndef __LINUX_W1_H
+#define __LINUX_W1_H
+
+#include <linux/device.h>
 
 /**
  * struct w1_reg_num - broken out slave device id
@@ -22,8 +26,7 @@
  * @id: along with family is the unique device id
  * @crc: checksum of the other bytes
  */
-struct w1_reg_num
-{
+struct w1_reg_num {
 #if defined(__LITTLE_ENDIAN_BITFIELD)
 	__u64	family:8,
 		id:48,
@@ -39,12 +42,6 @@ struct w1_reg_num
 
 #ifdef __KERNEL__
 
-#include <linux/completion.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-
-#include "w1_family.h"
-
 #define W1_MAXNAMELEN		32
 
 #define W1_SEARCH		0xF0
@@ -59,9 +56,6 @@ struct w1_reg_num
 #define W1_MATCH_ROM		0x55
 #define W1_RESUME_CMD		0xA5
 
-#define W1_SLAVE_ACTIVE		0
-#define W1_SLAVE_DETACH		1
-
 /**
  * struct w1_slave - holds a single slave device on the bus
  *
@@ -78,8 +72,7 @@ struct w1_reg_num
  * @dev: kernel device identifier
  *
  */
-struct w1_slave
-{
+struct w1_slave {
 	struct module		*owner;
 	unsigned char		name[W1_MAXNAMELEN];
 	struct list_head	w1_slave_entry;
@@ -96,7 +89,6 @@ struct w1_slave
 
 typedef void (*w1_slave_found_callback)(struct w1_master *, u64);
 
-
 /**
  * struct w1_bus_master - operations available on a bus master
  *
@@ -142,8 +134,7 @@ typedef void (*w1_slave_found_callback)(struct w1_master *, u64);
  * reset_bus.
  *
  */
-struct w1_bus_master
-{
+struct w1_bus_master {
 	void		*data;
 
 	u8		(*read_bit)(void *);
@@ -209,8 +200,7 @@ enum w1_master_flags {
  * @bus_master:		io operations available
  * @seq:		sequence number used for netlink broadcasts
  */
-struct w1_master
-{
+struct w1_master {
 	struct list_head	w1_master_entry;
 	struct module		*owner;
 	unsigned char		name[W1_MAXNAMELEN];
@@ -254,45 +244,51 @@ struct w1_master
 	u32			seq;
 };
 
+int w1_add_master_device(struct w1_bus_master *master);
+void w1_remove_master_device(struct w1_bus_master *master);
+
 /**
- * struct w1_async_cmd - execute callback from the w1_process kthread
- * @async_entry: link entry
- * @cb: callback function, must list_del and destroy this list before
- * returning
- *
- * When inserted into the w1_master async_list, w1_process will execute
- * the callback.  Embed this into the structure with the command details.
+ * struct w1_family_ops - operations for a family type
+ * @add_slave: add_slave
+ * @remove_slave: remove_slave
+ * @groups: sysfs group
  */
-struct w1_async_cmd {
-	struct list_head	async_entry;
-	void (*cb)(struct w1_master *dev, struct w1_async_cmd *async_cmd);
+struct w1_family_ops {
+	int  (*add_slave)(struct w1_slave *sl);
+	void (*remove_slave)(struct w1_slave *sl);
+	const struct attribute_group **groups;
 };
 
-int w1_create_master_attributes(struct w1_master *);
-void w1_destroy_master_attributes(struct w1_master *master);
-void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb);
-void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb);
-/* call w1_unref_slave to release the reference counts w1_search_slave added */
-struct w1_slave *w1_search_slave(struct w1_reg_num *id);
-/* decrements the reference on sl->master and sl, and cleans up if zero
- * returns the reference count after it has been decremented */
-int w1_unref_slave(struct w1_slave *sl);
-void w1_slave_found(struct w1_master *dev, u64 rn);
-void w1_search_process_cb(struct w1_master *dev, u8 search_type,
-	w1_slave_found_callback cb);
-struct w1_slave *w1_slave_search_device(struct w1_master *dev,
-	struct w1_reg_num *rn);
-struct w1_master *w1_search_master_id(u32 id);
-
-/* Disconnect and reconnect devices in the given family.  Used for finding
- * unclaimed devices after a family has been registered or releasing devices
- * after a family has been unregistered.  Set attach to 1 when a new family
- * has just been registered, to 0 when it has been unregistered.
+/**
+ * struct w1_family - reference counted family structure.
+ * @family_entry:	family linked list
+ * @fid:		8 bit family identifier
+ * @fops:		operations for this family
+ * @refcnt:		reference counter
+ */
+struct w1_family {
+	struct list_head	family_entry;
+	u8			fid;
+
+	struct w1_family_ops	*fops;
+
+	atomic_t		refcnt;
+};
+
+int w1_register_family(struct w1_family *family);
+void w1_unregister_family(struct w1_family *family);
+
+/**
+ * module_w1_driver() - Helper macro for registering a 1-Wire families
+ * @__w1_family: w1_family struct
+ *
+ * Helper macro for 1-Wire families which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
  */
-void w1_reconnect_slaves(struct w1_family *f, int attach);
-int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn);
-/* 0 success, otherwise EBUSY */
-int w1_slave_detach(struct w1_slave *sl);
+#define module_w1_family(__w1_family) \
+	module_driver(__w1_family, w1_register_family, \
+			w1_unregister_family)
 
 u8 w1_triplet(struct w1_master *dev, int bdir);
 void w1_write_8(struct w1_master *, u8);
@@ -321,16 +317,6 @@ static inline struct w1_master* dev_to_w1_master(struct device *dev)
 	return container_of(dev, struct w1_master, dev);
 }
 
-extern struct device_driver w1_master_driver;
-extern struct device w1_master_device;
-extern int w1_max_slave_count;
-extern int w1_max_slave_ttl;
-extern struct list_head w1_masters;
-extern struct mutex w1_mlock;
-
-extern int w1_process_callbacks(struct w1_master *dev);
-extern int w1_process(void *);
-
 #endif /* __KERNEL__ */
 
-#endif /* __W1_H */
+#endif /* __LINUX_W1_H */
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* Re: [PATCH 0/3] Add public w1 driver interface
  2017-03-16 15:19 [PATCH 0/3] Add public w1 driver interface Andrew F. Davis
                   ` (2 preceding siblings ...)
  2017-03-16 15:19 ` [PATCH 3/3] w1: Add subsystem kernel public interface Andrew F. Davis
@ 2017-03-25 18:47 ` Sebastian Reichel
  3 siblings, 0 replies; 6+ messages in thread
From: Sebastian Reichel @ 2017-03-25 18:47 UTC (permalink / raw)
  To: Andrew F. Davis
  Cc: Evgeniy Polyakov, Greg Kroah-Hartman, kernel-janitors, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 835 bytes --]

Hi,

On Thu, Mar 16, 2017 at 10:19:52AM -0500, Andrew F. Davis wrote:
> As part of continuing work to cleanup the BQ27xxx driver I am attempting
> to remove the need for the platform driver interface. For this we first
> need the w1 subsystem to act more like a traditional bus subsystem
> and allow drivers for attached devices to live outside of the w1
> directory.
> 
> The first couple patches are trivial, the last a bit more involved
> but should make no functional change, just a re-organization of
> header files.
> 
> Thanks,
> Andrew
> 
> Andrew F. Davis (3):
>   w1: Use kernel common min() implementation
>   w1: Remove unneeded use of assert() and remove w1_log.h
>   w1: Add subsystem kernel public interface

For the whole series:

Reviewed-by: Sebastian Reichel <sre@kernel.org>

-- Sebastian

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: [PATCH 3/3] w1: Add subsystem kernel public interface
       [not found]   ` <5478321493483316@web21g.yandex.ru>
@ 2017-05-01 17:36     ` Andrew F. Davis
  0 siblings, 0 replies; 6+ messages in thread
From: Andrew F. Davis @ 2017-05-01 17:36 UTC (permalink / raw)
  To: Evgeniy Polyakov, Greg Kroah-Hartman; +Cc: kernel-janitors, linux-kernel

On 04/29/2017 11:28 AM, Evgeniy Polyakov wrote:
> Hi everyone
> 
> 16.03.2017, 18:20, "Andrew F. Davis" <afd@ti.com>:
>> Like other subsystems we should be able to define slave devices outside
>> of the w1 directory. To do this we move public facing interface
>> definitions to include/linux/w1.h and rename the internal definition
>> file to w1_internal.h.
>>
>> As w1_family.h and w1_int.h contained almost entirely public
>> driver interface definitions we simply removed these files and
>> moved the remaining definitions into w1_internal.h.
> 
> w1_int.h was a shortname for w1_internal.h actually
> 
>> With this we can now start to move slave devices out of w1/slaves and
>> into the subsystem based on the function they implement, again like
>> other drivers.
> 
> I'm not against this patch per-se, I especially like linux/w1 include instead of ../w1.h,
> quite curious why didn't I move include file into linux directory in the first place,
> but please elaborate why is this needed?
> 

I'm moving the bq27xxx driver out of w1 and into power/supply where it
should be, see:
https://lkml.org/lkml/2017/3/16/688

> Also I do not agree with TI copyright in the new inclusion file which is merely a movement of the old file.
> 

There is more going on that just moving the file, this was a lot of
re-work, also I kept your copyright, is it a problem to add another? If
so I'm fine with that too and can remove it.

Andrew

^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-05-01 17:37 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-16 15:19 [PATCH 0/3] Add public w1 driver interface Andrew F. Davis
2017-03-16 15:19 ` [PATCH 1/3] w1: Use kernel common min() implementation Andrew F. Davis
2017-03-16 15:19 ` [PATCH 2/3] w1: Remove unneeded use of assert() and remove w1_log.h Andrew F. Davis
2017-03-16 15:19 ` [PATCH 3/3] w1: Add subsystem kernel public interface Andrew F. Davis
     [not found]   ` <5478321493483316@web21g.yandex.ru>
2017-05-01 17:36     ` Andrew F. Davis
2017-03-25 18:47 ` [PATCH 0/3] Add public w1 driver interface Sebastian Reichel

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).