From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933140AbdC3A0L (ORCPT ); Wed, 29 Mar 2017 20:26:11 -0400 Received: from anholt.net ([50.246.234.109]:54816 "EHLO anholt.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932757AbdC3A0J (ORCPT ); Wed, 29 Mar 2017 20:26:09 -0400 From: Eric Anholt To: linux-arm-kernel@lists.infradead.org, Lee Jones , Florian Fainelli , Olof Johansson , Rob Herring , Mark Rutland , devicetree@vger.kernel.org Cc: linux-rpi-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Stephen Warren , Stefan Wahren , bcm-kernel-feedback-list@broadcom.com, Gerd Hoffmann , Eric Anholt Subject: [PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v4) Date: Wed, 29 Mar 2017 17:26:05 -0700 Message-Id: <20170330002605.15213-1-eric@anholt.net> X-Mailer: git-send-email 2.11.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for now, so it's useful to be able to test that mode on an upstream kernel. It's also been useful for me to use the same board for 32-bit and 64-bit development. Signed-off-by: Eric Anholt --- v1: Gerd's patch that put the ../../../arm64/... link in the Makefile v2: Michael's patch that #included from ../../../arm64/... in a new bcm2837-rpi-3-b.dts. v3: Mine, using symlinks to make sure that we don't break the split DT tree. v4: Rely on the new include/arm64 symlink. Assuming positive review feedback, I assume it would be acceptable to merge the shared/dt-symlinks branch in a PR of my own for the 32-bit DT branch? arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 011808490fed..27d258cb50f2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-b-plus.dtb \ bcm2835-rpi-a-plus.dtb \ bcm2836-rpi-2-b.dtb \ + include/arm64/broadcom/bcm2837-rpi-3-b.dtb \ bcm2835-rpi-zero.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac56u.dtb \ -- 2.11.0