From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752071AbdDALC7 (ORCPT ); Sat, 1 Apr 2017 07:02:59 -0400 Received: from mail7.pr.hu ([87.242.0.7]:47708 "EHLO mail7.pr.hu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751996AbdDALC5 (ORCPT ); Sat, 1 Apr 2017 07:02:57 -0400 From: Zoltan Boszormenyi To: linux-usb@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-i2c@vger.kernel.org Cc: linux-kernel@vger.kernel.org, =?UTF-8?q?B=C3=B6sz=C3=B6rm=C3=A9nyi=20Zolt=C3=A1n?= Subject: [PATCH 3/3] watchdog: sp5100_tco: Synchronize I/O port accesses Date: Sat, 1 Apr 2017 13:02:23 +0200 Message-Id: <20170401110223.12056-4-zboszor@pr.hu> X-Mailer: git-send-email 2.9.3 In-Reply-To: <20170401110223.12056-1-zboszor@pr.hu> References: <20170401100609.9054-1-zboszor@pr.hu> <20170401110223.12056-1-zboszor@pr.hu> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-Spam-Score: 1.3 (+) X-Scan-Signature: a8450acac6a8a61c670ebb38acccf924 X-Spam-Tracer: backend.mail.pr.hu 1.3 20170401110253Z Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Böszörményi Zoltán Use the new header and the mutex from usb/host/pci-quirks.c This change will allow accesses to the SB800 I/O port pair synchronized with the PCI quirk when isochronous USB transfers are performed and with i2c-piix4. At the same time, remove the request_region() call to reserve these I/O ports, similarly to i2c-piix4 so the code is now uniform across the three individual drivers. Signed-off-by: Zoltan Boszormenyi --- drivers/watchdog/sp5100_tco.c | 24 +++++++++++------------- drivers/watchdog/sp5100_tco.h | 10 ++++++---- 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c index 028618c..dc125df 100644 --- a/drivers/watchdog/sp5100_tco.c +++ b/drivers/watchdog/sp5100_tco.c @@ -48,7 +48,6 @@ static u32 tcobase_phys; static u32 tco_wdt_fired; static void __iomem *tcobase; -static unsigned int pm_iobase; static DEFINE_SPINLOCK(tco_lock); /* Guards the hardware */ static unsigned long timer_alive; static char tco_expect_close; @@ -138,6 +137,8 @@ static void tco_timer_enable(void) if (!tco_has_sp5100_reg_layout(sp5100_tco_pci)) { /* For SB800 or later */ + enter_sb800(); + /* Set the Watchdog timer resolution to 1 sec */ outb(SB800_PM_WATCHDOG_CONFIG, SB800_IO_PM_INDEX_REG); val = inb(SB800_IO_PM_DATA_REG); @@ -150,6 +151,8 @@ static void tco_timer_enable(void) val |= SB800_PCI_WATCHDOG_DECODE_EN; val &= ~SB800_PM_WATCHDOG_DISABLE; outb(val, SB800_IO_PM_DATA_REG); + + leave_sb800(); } else { /* For SP5100 or SB7x0 */ /* Enable watchdog decode bit */ @@ -164,11 +167,13 @@ static void tco_timer_enable(void) val); /* Enable Watchdog timer and set the resolution to 1 sec */ + enter_sb800(); outb(SP5100_PM_WATCHDOG_CONTROL, SP5100_IO_PM_INDEX_REG); val = inb(SP5100_IO_PM_DATA_REG); val |= SP5100_PM_WATCHDOG_SECOND_RES; val &= ~SP5100_PM_WATCHDOG_DISABLE; outb(val, SP5100_IO_PM_DATA_REG); + leave_sb800(); } } @@ -361,16 +366,10 @@ static unsigned char sp5100_tco_setupdevice(void) base_addr = SB800_PM_WATCHDOG_BASE; } - /* Request the IO ports used by this driver */ - pm_iobase = SP5100_IO_PM_INDEX_REG; - if (!request_region(pm_iobase, SP5100_PM_IOPORTS_SIZE, dev_name)) { - pr_err("I/O address 0x%04x already in use\n", pm_iobase); - goto exit; - } - /* * First, Find the watchdog timer MMIO address from indirect I/O. */ + enter_sb800(); outb(base_addr+3, index_reg); val = inb(data_reg); outb(base_addr+2, index_reg); @@ -380,6 +379,7 @@ static unsigned char sp5100_tco_setupdevice(void) outb(base_addr+0, index_reg); /* Low three bits of BASE are reserved */ val = val << 8 | (inb(data_reg) & 0xf8); + leave_sb800(); pr_debug("Got 0x%04x from indirect I/O\n", val); @@ -400,6 +400,7 @@ static unsigned char sp5100_tco_setupdevice(void) SP5100_SB_RESOURCE_MMIO_BASE, &val); } else { /* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */ + enter_sb800(); outb(SB800_PM_ACPI_MMIO_EN+3, SB800_IO_PM_INDEX_REG); val = inb(SB800_IO_PM_DATA_REG); outb(SB800_PM_ACPI_MMIO_EN+2, SB800_IO_PM_INDEX_REG); @@ -408,6 +409,7 @@ static unsigned char sp5100_tco_setupdevice(void) val = val << 8 | inb(SB800_IO_PM_DATA_REG); outb(SB800_PM_ACPI_MMIO_EN+0, SB800_IO_PM_INDEX_REG); val = val << 8 | inb(SB800_IO_PM_DATA_REG); + leave_sb800(); } /* The SBResource_MMIO is enabled and mapped memory space? */ @@ -429,7 +431,7 @@ static unsigned char sp5100_tco_setupdevice(void) pr_debug("SBResource_MMIO is disabled(0x%04x)\n", val); pr_notice("failed to find MMIO address, giving up.\n"); - goto unreg_region; + goto exit; setup_wdt: tcobase_phys = val; @@ -469,8 +471,6 @@ static unsigned char sp5100_tco_setupdevice(void) unreg_mem_region: release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE); -unreg_region: - release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE); exit: return 0; } @@ -517,7 +517,6 @@ static int sp5100_tco_init(struct platform_device *dev) exit: iounmap(tcobase); release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE); - release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE); return ret; } @@ -531,7 +530,6 @@ static void sp5100_tco_cleanup(void) misc_deregister(&sp5100_tco_miscdev); iounmap(tcobase); release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE); - release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE); } static int sp5100_tco_remove(struct platform_device *dev) diff --git a/drivers/watchdog/sp5100_tco.h b/drivers/watchdog/sp5100_tco.h index 2b28c00..f5d9402 100644 --- a/drivers/watchdog/sp5100_tco.h +++ b/drivers/watchdog/sp5100_tco.h @@ -6,6 +6,8 @@ * TCO timer driver for sp5100 chipsets */ +#include + /* * Some address definitions for the Watchdog */ @@ -24,8 +26,8 @@ */ /* For SP5100/SB7x0 chipset */ -#define SP5100_IO_PM_INDEX_REG 0xCD6 -#define SP5100_IO_PM_DATA_REG 0xCD7 +#define SP5100_IO_PM_INDEX_REG SB800_PIIX4_SMB_IDX +#define SP5100_IO_PM_DATA_REG SB800_PIIX4_SMB_DATA #define SP5100_SB_RESOURCE_MMIO_BASE 0x9C @@ -45,8 +47,8 @@ /* For SB8x0(or later) chipset */ -#define SB800_IO_PM_INDEX_REG 0xCD6 -#define SB800_IO_PM_DATA_REG 0xCD7 +#define SB800_IO_PM_INDEX_REG SB800_PIIX4_SMB_IDX +#define SB800_IO_PM_DATA_REG SB800_PIIX4_SMB_DATA #define SB800_PM_ACPI_MMIO_EN 0x24 #define SB800_PM_WATCHDOG_CONTROL 0x48 -- 2.9.3