From: Andrew Jeffery <andrew@aj.id.au>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Andrew Jeffery <andrew@aj.id.au>,
Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, openbmc@lists.ozlabs.org
Subject: [PATCH v2 4/4] pinctrl: aspeed: g5: Add pinconf support
Date: Fri, 7 Apr 2017 22:27:13 +0930 [thread overview]
Message-ID: <20170407125713.15678-5-andrew@aj.id.au> (raw)
In-Reply-To: <20170407125713.15678-1-andrew@aj.id.au>
Testing for pinctrl-aspeed-g5 was performed on an AST2500EVB system,
using the strategy outlined in the commit message for the change to the
Aspeed pinctrl core.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 153 ++++++++++++++++++++++++++++-
1 file changed, 152 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
index 43221a3c7e23..68aa04664a62 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
@@ -2285,6 +2285,146 @@ static const struct aspeed_pin_function aspeed_g5_functions[] = {
ASPEED_PINCTRL_FUNC(WDTRST2),
};
+static struct aspeed_pin_config aspeed_g5_configs[] = {
+ /* GPIOA, GPIOQ */
+ { PIN_CONFIG_BIAS_PULL_DOWN, { B14, B13 }, SCU8C, 16 },
+ { PIN_CONFIG_BIAS_DISABLE, { B14, B13 }, SCU8C, 16 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { A11, N20 }, SCU8C, 16 },
+ { PIN_CONFIG_BIAS_DISABLE, { A11, N20 }, SCU8C, 16 },
+
+ /* GPIOB, GPIOR */
+ { PIN_CONFIG_BIAS_PULL_DOWN, { K19, H20 }, SCU8C, 17 },
+ { PIN_CONFIG_BIAS_DISABLE, { K19, H20 }, SCU8C, 17 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { AA19, E10 }, SCU8C, 17 },
+ { PIN_CONFIG_BIAS_DISABLE, { AA19, E10 }, SCU8C, 17 },
+
+ /* GPIOC, GPIOS*/
+ { PIN_CONFIG_BIAS_PULL_DOWN, { C12, B11 }, SCU8C, 18 },
+ { PIN_CONFIG_BIAS_DISABLE, { C12, B11 }, SCU8C, 18 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { V20, AA20 }, SCU8C, 18 },
+ { PIN_CONFIG_BIAS_DISABLE, { V20, AA20 }, SCU8C, 18 },
+
+ /* GPIOD, GPIOY */
+ { PIN_CONFIG_BIAS_PULL_DOWN, { F19, C21 }, SCU8C, 19 },
+ { PIN_CONFIG_BIAS_DISABLE, { F19, C21 }, SCU8C, 19 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { R22, P20 }, SCU8C, 19 },
+ { PIN_CONFIG_BIAS_DISABLE, { R22, P20 }, SCU8C, 19 },
+
+ /* GPIOE, GPIOZ */
+ { PIN_CONFIG_BIAS_PULL_DOWN, { B20, B19 }, SCU8C, 20 },
+ { PIN_CONFIG_BIAS_DISABLE, { B20, B19 }, SCU8C, 20 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { Y20, W21 }, SCU8C, 20 },
+ { PIN_CONFIG_BIAS_DISABLE, { Y20, W21 }, SCU8C, 20 },
+
+ /* GPIOF, GPIOAA */
+ { PIN_CONFIG_BIAS_PULL_DOWN, { J19, H18 }, SCU8C, 21 },
+ { PIN_CONFIG_BIAS_DISABLE, { J19, H18 }, SCU8C, 21 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { Y21, P19 }, SCU8C, 21 },
+ { PIN_CONFIG_BIAS_DISABLE, { Y21, P19 }, SCU8C, 21 },
+
+ /* GPIOG, GPIOAB */
+ { PIN_CONFIG_BIAS_PULL_DOWN, { A19, E14 }, SCU8C, 22 },
+ { PIN_CONFIG_BIAS_DISABLE, { A19, E14 }, SCU8C, 22 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { N19, R20 }, SCU8C, 22 },
+ { PIN_CONFIG_BIAS_DISABLE, { N19, R20 }, SCU8C, 22 },
+
+ /* GPIOH, GPIOAC */
+ { PIN_CONFIG_BIAS_PULL_DOWN, { A18, D18 }, SCU8C, 23 },
+ { PIN_CONFIG_BIAS_DISABLE, { A18, D18 }, SCU8C, 23 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { G21, G22 }, SCU8C, 23 },
+ { PIN_CONFIG_BIAS_DISABLE, { G21, G22 }, SCU8C, 23 },
+
+ /* GPIOs [I, P] */
+ { PIN_CONFIG_BIAS_PULL_DOWN, { C18, A15 }, SCU8C, 24 },
+ { PIN_CONFIG_BIAS_DISABLE, { C18, A15 }, SCU8C, 24 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { R2, T3 }, SCU8C, 25 },
+ { PIN_CONFIG_BIAS_DISABLE, { R2, T3 }, SCU8C, 25 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { L3, R1 }, SCU8C, 26 },
+ { PIN_CONFIG_BIAS_DISABLE, { L3, R1 }, SCU8C, 26 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { T2, W1 }, SCU8C, 27 },
+ { PIN_CONFIG_BIAS_DISABLE, { T2, W1 }, SCU8C, 27 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { Y1, T5 }, SCU8C, 28 },
+ { PIN_CONFIG_BIAS_DISABLE, { Y1, T5 }, SCU8C, 28 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { V2, T4 }, SCU8C, 29 },
+ { PIN_CONFIG_BIAS_DISABLE, { V2, T4 }, SCU8C, 29 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { U5, W4 }, SCU8C, 30 },
+ { PIN_CONFIG_BIAS_DISABLE, { U5, W4 }, SCU8C, 30 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { V4, V6 }, SCU8C, 31 },
+ { PIN_CONFIG_BIAS_DISABLE, { V4, V6 }, SCU8C, 31 },
+
+ /* GPIOs T[0-5] (RGMII1 Tx pins) */
+ { PIN_CONFIG_DRIVE_STRENGTH, { B5, B5 }, SCU90, 8 },
+ { PIN_CONFIG_DRIVE_STRENGTH, { E9, A5 }, SCU90, 9 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { B5, D7 }, SCU90, 12 },
+ { PIN_CONFIG_BIAS_DISABLE, { B5, D7 }, SCU90, 12 },
+
+ /* GPIOs T[6-7], U[0-3] (RGMII2 TX pins) */
+ { PIN_CONFIG_DRIVE_STRENGTH, { B2, B2 }, SCU90, 10 },
+ { PIN_CONFIG_DRIVE_STRENGTH, { B1, B3 }, SCU90, 11 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { B2, D4 }, SCU90, 14 },
+ { PIN_CONFIG_BIAS_DISABLE, { B2, D4 }, SCU90, 14 },
+
+ /* GPIOs U[4-7], V[0-1] (RGMII1 Rx pins) */
+ { PIN_CONFIG_BIAS_PULL_DOWN, { B4, C4 }, SCU90, 13 },
+ { PIN_CONFIG_BIAS_DISABLE, { B4, C4 }, SCU90, 13 },
+
+ /* GPIOs V[2-7] (RGMII2 Rx pins) */
+ { PIN_CONFIG_BIAS_PULL_DOWN, { C2, E6 }, SCU90, 15 },
+ { PIN_CONFIG_BIAS_DISABLE, { C2, E6 }, SCU90, 15 },
+
+ /* ADC pull-downs (SCUA8[19:4]) */
+ { PIN_CONFIG_BIAS_PULL_DOWN, { F4, F4 }, SCUA8, 4 },
+ { PIN_CONFIG_BIAS_DISABLE, { F4, F4 }, SCUA8, 4 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { F5, F5 }, SCUA8, 5 },
+ { PIN_CONFIG_BIAS_DISABLE, { F5, F5 }, SCUA8, 5 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { E2, E2 }, SCUA8, 6 },
+ { PIN_CONFIG_BIAS_DISABLE, { E2, E2 }, SCUA8, 6 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { E1, E1 }, SCUA8, 7 },
+ { PIN_CONFIG_BIAS_DISABLE, { E1, E1 }, SCUA8, 7 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { F3, F3 }, SCUA8, 8 },
+ { PIN_CONFIG_BIAS_DISABLE, { F3, F3 }, SCUA8, 8 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { E3, E3 }, SCUA8, 9 },
+ { PIN_CONFIG_BIAS_DISABLE, { E3, E3 }, SCUA8, 9 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { G5, G5 }, SCUA8, 10 },
+ { PIN_CONFIG_BIAS_DISABLE, { G5, G5 }, SCUA8, 10 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { G4, G4 }, SCUA8, 11 },
+ { PIN_CONFIG_BIAS_DISABLE, { G4, G4 }, SCUA8, 11 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { F2, F2 }, SCUA8, 12 },
+ { PIN_CONFIG_BIAS_DISABLE, { F2, F2 }, SCUA8, 12 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { G3, G3 }, SCUA8, 13 },
+ { PIN_CONFIG_BIAS_DISABLE, { G3, G3 }, SCUA8, 13 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { G2, G2 }, SCUA8, 14 },
+ { PIN_CONFIG_BIAS_DISABLE, { G2, G2 }, SCUA8, 14 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { F1, F1 }, SCUA8, 15 },
+ { PIN_CONFIG_BIAS_DISABLE, { F1, F1 }, SCUA8, 15 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { H5, H5 }, SCUA8, 16 },
+ { PIN_CONFIG_BIAS_DISABLE, { H5, H5 }, SCUA8, 16 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { G1, G1 }, SCUA8, 17 },
+ { PIN_CONFIG_BIAS_DISABLE, { G1, G1 }, SCUA8, 17 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { H3, H3 }, SCUA8, 18 },
+ { PIN_CONFIG_BIAS_DISABLE, { H3, H3 }, SCUA8, 18 },
+ { PIN_CONFIG_BIAS_PULL_DOWN, { H4, H4 }, SCUA8, 19 },
+ { PIN_CONFIG_BIAS_DISABLE, { H4, H4 }, SCUA8, 19 },
+
+ /*
+ * Debounce settings for GPIOs D and E passthrough mode are in
+ * SCUA8[27:20] and so are managed by pinctrl. Normal GPIO debounce for
+ * banks D and E is handled by the GPIO driver - GPIO passthrough is
+ * treated like any other non-GPIO mux function. There is a catch
+ * however, in that the debounce period is configured in the GPIO
+ * controller. Due to this tangle between GPIO and pinctrl we don't yet
+ * fully support pass-through debounce.
+ */
+ { PIN_CONFIG_INPUT_DEBOUNCE, { F19, E21 }, SCUA8, 20 },
+ { PIN_CONFIG_INPUT_DEBOUNCE, { F20, D20 }, SCUA8, 21 },
+ { PIN_CONFIG_INPUT_DEBOUNCE, { D21, E20 }, SCUA8, 22 },
+ { PIN_CONFIG_INPUT_DEBOUNCE, { G18, C21 }, SCUA8, 23 },
+ { PIN_CONFIG_INPUT_DEBOUNCE, { B20, C20 }, SCUA8, 24 },
+ { PIN_CONFIG_INPUT_DEBOUNCE, { F18, F17 }, SCUA8, 25 },
+ { PIN_CONFIG_INPUT_DEBOUNCE, { E18, D19 }, SCUA8, 26 },
+ { PIN_CONFIG_INPUT_DEBOUNCE, { A20, B19 }, SCUA8, 27 },
+};
+
static struct aspeed_pinctrl_data aspeed_g5_pinctrl_data = {
.pins = aspeed_g5_pins,
.npins = ARRAY_SIZE(aspeed_g5_pins),
@@ -2292,6 +2432,8 @@ static struct aspeed_pinctrl_data aspeed_g5_pinctrl_data = {
.ngroups = ARRAY_SIZE(aspeed_g5_groups),
.functions = aspeed_g5_functions,
.nfunctions = ARRAY_SIZE(aspeed_g5_functions),
+ .configs = aspeed_g5_configs,
+ .nconfigs = ARRAY_SIZE(aspeed_g5_configs),
};
static struct pinmux_ops aspeed_g5_pinmux_ops = {
@@ -2308,16 +2450,25 @@ static struct pinctrl_ops aspeed_g5_pinctrl_ops = {
.get_group_name = aspeed_pinctrl_get_group_name,
.get_group_pins = aspeed_pinctrl_get_group_pins,
.pin_dbg_show = aspeed_pinctrl_pin_dbg_show,
- .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_all,
.dt_free_map = pinctrl_utils_free_map,
};
+static struct pinconf_ops aspeed_g5_conf_ops = {
+ .is_generic = true,
+ .pin_config_get = aspeed_pin_config_get,
+ .pin_config_set = aspeed_pin_config_set,
+ .pin_config_group_get = aspeed_pin_config_group_get,
+ .pin_config_group_set = aspeed_pin_config_group_set,
+};
+
static struct pinctrl_desc aspeed_g5_pinctrl_desc = {
.name = "aspeed-g5-pinctrl",
.pins = aspeed_g5_pins,
.npins = ARRAY_SIZE(aspeed_g5_pins),
.pctlops = &aspeed_g5_pinctrl_ops,
.pmxops = &aspeed_g5_pinmux_ops,
+ .confops = &aspeed_g5_conf_ops,
};
static int aspeed_g5_pinctrl_probe(struct platform_device *pdev)
--
2.9.3
next prev parent reply other threads:[~2017-04-07 12:58 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-07 12:57 [PATCH v2 0/4] pinctrl: aspeed: Add initial pinconf support Andrew Jeffery
2017-04-07 12:57 ` [PATCH v2 1/4] pinctrl: aspeed: Document pinconf in devicetree bindings Andrew Jeffery
2017-04-13 19:49 ` Rob Herring
2017-04-21 2:20 ` Joel Stanley
2017-04-24 12:42 ` Linus Walleij
2017-04-07 12:57 ` [PATCH v2 2/4] pinctrl: aspeed: Add core pinconf support Andrew Jeffery
2017-04-24 12:54 ` Linus Walleij
2017-04-07 12:57 ` [PATCH v2 3/4] pinctrl: aspeed: g4: Add " Andrew Jeffery
2017-04-24 12:55 ` Linus Walleij
2017-04-07 12:57 ` Andrew Jeffery [this message]
2017-04-24 12:56 ` [PATCH v2 4/4] pinctrl: aspeed: g5: " Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170407125713.15678-5-andrew@aj.id.au \
--to=andrew@aj.id.au \
--cc=benh@kernel.crashing.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).