From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756378AbdDNBGv (ORCPT ); Thu, 13 Apr 2017 21:06:51 -0400 Received: from ec2-52-27-115-49.us-west-2.compute.amazonaws.com ([52.27.115.49]:42939 "EHLO osg.samsung.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1755829AbdDNBGo (ORCPT ); Thu, 13 Apr 2017 21:06:44 -0400 From: Javier Martinez Canillas To: linux-kernel@vger.kernel.org Cc: Wolfram Sang , Javier Martinez Canillas , =?UTF-8?q?S=C3=B6ren=20Brinkmann?= , devicetree@vger.kernel.org, Michal Simek , Rob Herring , Will Deacon , Mark Rutland , Catalin Marinas , linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 16/21] arm64: zynqmp: Add generic compatible string for I2C EEPROM Date: Thu, 13 Apr 2017 22:04:40 -0300 Message-Id: <20170414010445.21727-17-javier@osg.samsung.com> X-Mailer: git-send-email 2.9.3 In-Reply-To: <20170414010445.21727-1-javier@osg.samsung.com> References: <20170414010445.21727-1-javier@osg.samsung.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas --- Changes in v3: None Changes in v2: None arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts index ef1b9e573af0..9f29f99984f7 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts @@ -55,7 +55,7 @@ status = "okay"; clock-frequency = <400000>; eeprom@54 { - compatible = "at,24c64"; + compatible = "at,24c64", "atmel,24c64"; reg = <0x54>; }; }; @@ -64,7 +64,7 @@ status = "okay"; clock-frequency = <400000>; eeprom@55 { - compatible = "at,24c64"; + compatible = "at,24c64", "atmel,24c64"; reg = <0x55>; }; }; -- 2.9.3