From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755051AbdDQMAQ (ORCPT ); Mon, 17 Apr 2017 08:00:16 -0400 Received: from hermes.aosc.io ([199.195.250.187]:56005 "EHLO hermes.aosc.io" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751217AbdDQMAN (ORCPT ); Mon, 17 Apr 2017 08:00:13 -0400 From: Icenowy Zheng To: Lee Jones , Rob Herring , Chen-Yu Tsai , Maxime Ripard , Liam Girdwood , Mark Brown Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@googlegroups.com, Icenowy Zheng Subject: [PATCH v3 03/12] dt-bindings: make AXP20X compatible strings one per line Date: Mon, 17 Apr 2017 19:57:38 +0800 Message-Id: <20170417115747.7300-4-icenowy@aosc.io> In-Reply-To: <20170417115747.7300-1-icenowy@aosc.io> References: <20170417115747.7300-1-icenowy@aosc.io> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org In the binding documentation of AXP20X mfd, the compatible strings used to be listed for three per line, which leads to some mess when trying to add AXP803 compatible string (as we have already AXP806 and AXP809 compatibles, which is after AXP803 in ascending order). Make the compatible strings one per line, so that inserting a new compatible string will be directly a new line. Signed-off-by: Icenowy Zheng --- New patch in v3. Documentation/devicetree/bindings/mfd/axp20x.txt | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index b41d2601c6ba..a3e813f6060a 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -9,9 +9,14 @@ axp223 (X-Powers) axp809 (X-Powers) Required properties: -- compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209", - "x-powers,axp221", "x-powers,axp223", "x-powers,axp806", - "x-powers,axp809" +- compatible: should be one of: + * "x-powers,axp152" + * "x-powers,axp202" + * "x-powers,axp209" + * "x-powers,axp221" + * "x-powers,axp223" + * "x-powers,axp806" + * "x-powers,axp809" - reg: The I2C slave address or RSB hardware address for the AXP chip - interrupt-parent: The parent interrupt controller - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin -- 2.12.2