From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1032861AbdDTQad (ORCPT ); Thu, 20 Apr 2017 12:30:33 -0400 Received: from mail-oi0-f66.google.com ([209.85.218.66]:35546 "EHLO mail-oi0-f66.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S971258AbdDTQa2 (ORCPT ); Thu, 20 Apr 2017 12:30:28 -0400 From: Andrey Smirnov To: linux-mtd@lists.infradead.org Cc: Andrey Smirnov , cphealy@gmail.com, David Woodhouse , Brian Norris , Boris Brezillon , Marek Vasut , Richard Weinberger , Cyrille Pitchen , linux-kernel@vger.kernel.org Subject: [PATCH v4 5/6] mtd: dataflash: Make use of "extened device information" Date: Thu, 20 Apr 2017 09:29:51 -0700 Message-Id: <20170420162952.5181-5-andrew.smirnov@gmail.com> X-Mailer: git-send-email 2.9.3 In-Reply-To: <20170420162952.5181-1-andrew.smirnov@gmail.com> References: <20170420162952.5181-1-andrew.smirnov@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org In anticipation of supporting chips that need it, extend the size of struct flash_info's 'jedec_id' field to make room 2 byte of extended device information as well as add code to fetch this data during jedec_probe(). Cc: cphealy@gmail.com Cc: David Woodhouse Cc: Brian Norris Cc: Boris Brezillon Cc: Marek Vasut Cc: Richard Weinberger Cc: Cyrille Pitchen Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov --- Changes since [v3]: - Convert patch to use SUP_EXTID flag and avoid patching dataflash_data table Changes since [v2]: - Make 'id' have same size as 'jedec' - Get rid of eid_mask variable in favour of using GENMASK in-place Changes since [v1]: - Formatting [v1] http://lkml.kernel.org/r/20170411161722.11164-1-andrew.smirnov@gmail.com [v2] http://lkml.kernel.org/r/20170418142127.23301-3-andrew.smirnov@gmail.com [v3] http://lkml.kernel.org/r/20170419152305.17226-5-andrew.smirnov@gmail.com drivers/mtd/devices/mtd_dataflash.c | 88 ++++++++++++++++++++++++------------- 1 file changed, 57 insertions(+), 31 deletions(-) diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 2d3e403..9342cc47 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -84,6 +84,9 @@ #define CFI_MFR_ATMEL 0x1F +#define DATAFLASH_SHIFT_EXTID 24 +#define DATAFLASH_SHIFT_ID 40 + struct dataflash { u8 command[4]; char name[24]; @@ -687,7 +690,7 @@ struct flash_info { /* JEDEC id has a high byte of zero plus three data bytes: * the manufacturer id, then a two byte device id. */ - u32 jedec_id; + u64 jedec_id; /* The size listed here is what works with OP_ERASE_PAGE. */ unsigned nr_pages; @@ -695,6 +698,7 @@ struct flash_info { u16 pageoffset; u16 flags; +#define SUP_EXTID BIT(3) #define SUP_POW2PS 0x0002 /* supports 2^N byte pages */ #define IS_POW2PS 0x0001 /* uses 2^N byte pages */ }; @@ -734,42 +738,18 @@ static struct flash_info dataflash_data[] = { { "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS}, }; -static struct flash_info *jedec_probe(struct spi_device *spi) +static struct flash_info *jedec_lookup(struct spi_device *spi, + u64 jedec, bool use_extid) { - int ret; - u8 code = OP_READ_ID; - u8 id[3]; - u32 jedec; struct flash_info *info; int status; - /* - * JEDEC also defines an optional "extended device information" - * string for after vendor-specific data, after the three bytes - * we use here. Supporting some chips might require using it. - * - * If the vendor ID isn't Atmel's (0x1f), assume this call failed. - * That's not an error; only rev C and newer chips handle it, and - * only Atmel sells these chips. - */ - ret = spi_write_then_read(spi, &code, 1, id, 3); - if (ret < 0) { - dev_dbg(&spi->dev, "error %d reading JEDEC ID\n", ret); - return ERR_PTR(ret); - } - - if (id[0] != CFI_MFR_ATMEL) - return NULL; - - jedec = id[0]; - jedec = jedec << 8; - jedec |= id[1]; - jedec = jedec << 8; - jedec |= id[2]; - for (info = dataflash_data; info < dataflash_data + ARRAY_SIZE(dataflash_data); info++) { + if (use_extid && !(info->flags & SUP_EXTID)) + continue; + if (info->jedec_id == jedec) { dev_dbg(&spi->dev, "OTP, sector protect%s\n", (info->flags & SUP_POW2PS) ? @@ -793,12 +773,58 @@ static struct flash_info *jedec_probe(struct spi_device *spi) } } + return ERR_PTR(-ENODEV); +} + +static struct flash_info *jedec_probe(struct spi_device *spi) +{ + int ret; + u8 code = OP_READ_ID; + u64 jedec; + u8 id[sizeof(jedec)] = {0}; + const unsigned int id_size = 5; + struct flash_info *info; + + /* + * JEDEC also defines an optional "extended device information" + * string for after vendor-specific data, after the three bytes + * we use here. Supporting some chips might require using it. + * + * If the vendor ID isn't Atmel's (0x1f), assume this call failed. + * That's not an error; only rev C and newer chips handle it, and + * only Atmel sells these chips. + */ + ret = spi_write_then_read(spi, &code, 1, id, id_size); + if (ret < 0) { + dev_dbg(&spi->dev, "error %d reading JEDEC ID\n", ret); + return ERR_PTR(ret); + } + + if (id[0] != CFI_MFR_ATMEL) + return NULL; + + jedec = be64_to_cpup((__be64 *)id); + + /* + * First, try to match device using extended device + * information + */ + info = jedec_lookup(spi, jedec >> DATAFLASH_SHIFT_EXTID, true); + if (!IS_ERR(info)) + return info; + /* + * If that fails, make another pass using regular ID + * information + */ + info = jedec_lookup(spi, jedec >> DATAFLASH_SHIFT_ID, false); + if (!IS_ERR(info)) + return info; /* * Treat other chips as errors ... we won't know the right page * size (it might be binary) even when we can tell which density * class is involved (legacy chip id scheme). */ - dev_warn(&spi->dev, "JEDEC id %06x not handled\n", jedec); + dev_warn(&spi->dev, "JEDEC id %016llx not handled\n", jedec); return ERR_PTR(-ENODEV); } -- 2.9.3