* [PATCH] timer: fix timer_migration to accept only 0 and 1
@ 2017-04-19 22:24 Myungho Jung
2017-04-20 12:53 ` Thomas Gleixner
2017-04-20 13:14 ` [tip:timers/core] timer/sysclt: Restrict timer migration sysctl values to " tip-bot for Myungho Jung
0 siblings, 2 replies; 6+ messages in thread
From: Myungho Jung @ 2017-04-19 22:24 UTC (permalink / raw)
To: tglx; +Cc: linux-kernel
Error is not shown by setting invalid value to timer_migration. Valid
values for timer_migration should be restricted to 0 and 1. Testcase for
this bug is ltp/runpwtests06.
Signed-off-by: Myungho Jung <mhjungk@gmail.com>
---
kernel/sysctl.c | 2 ++
kernel/time/timer.c | 2 +-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 8c8714f..21343d1 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1176,6 +1176,8 @@ static struct ctl_table kern_table[] = {
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = timer_migration_handler,
+ .extra1 = &zero,
+ .extra2 = &one,
},
#endif
#ifdef CONFIG_BPF_SYSCALL
diff --git a/kernel/time/timer.c b/kernel/time/timer.c
index 1dc0256..cc6b6bd 100644
--- a/kernel/time/timer.c
+++ b/kernel/time/timer.c
@@ -241,7 +241,7 @@ int timer_migration_handler(struct ctl_table *table, int write,
int ret;
mutex_lock(&mutex);
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
+ ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
if (!ret && write)
timers_update_migration(false);
mutex_unlock(&mutex);
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] timer: fix timer_migration to accept only 0 and 1
2017-04-19 22:24 [PATCH] timer: fix timer_migration to accept only 0 and 1 Myungho Jung
@ 2017-04-20 12:53 ` Thomas Gleixner
2017-04-20 17:36 ` Myungho Jung
2017-04-20 13:14 ` [tip:timers/core] timer/sysclt: Restrict timer migration sysctl values to " tip-bot for Myungho Jung
1 sibling, 1 reply; 6+ messages in thread
From: Thomas Gleixner @ 2017-04-20 12:53 UTC (permalink / raw)
To: Myungho Jung; +Cc: linux-kernel
On Wed, 19 Apr 2017, Myungho Jung wrote:
> Error is not shown by setting invalid value to timer_migration. Valid
> values for timer_migration should be restricted to 0 and 1. Testcase for
> this bug is ltp/runpwtests06.
While I agree with the change, I disagree with the changelog. Where is the bug?
The timer code checks for timer_migration != 0 resp. == 0. So as long as
the value is != 0 it's enabled, if it's 0 it is disabled.
It's a correctness issue that we treat a sysctl which is basically a
boolean as such. Ideally we'd have: proc_doboolvec() for such cases and
convert all similar sysctls over to that.
Thanks,
tglx
^ permalink raw reply [flat|nested] 6+ messages in thread
* [tip:timers/core] timer/sysclt: Restrict timer migration sysctl values to 0 and 1
2017-04-19 22:24 [PATCH] timer: fix timer_migration to accept only 0 and 1 Myungho Jung
2017-04-20 12:53 ` Thomas Gleixner
@ 2017-04-20 13:14 ` tip-bot for Myungho Jung
1 sibling, 0 replies; 6+ messages in thread
From: tip-bot for Myungho Jung @ 2017-04-20 13:14 UTC (permalink / raw)
To: linux-tip-commits; +Cc: linux-kernel, tglx, hpa, mingo, mhjungk
Commit-ID: b94bf594cf8ed67cdd0439e70fa939783471597a
Gitweb: http://git.kernel.org/tip/b94bf594cf8ed67cdd0439e70fa939783471597a
Author: Myungho Jung <mhjungk@gmail.com>
AuthorDate: Wed, 19 Apr 2017 15:24:50 -0700
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Thu, 20 Apr 2017 14:56:59 +0200
timer/sysclt: Restrict timer migration sysctl values to 0 and 1
timer_migration sysctl acts as a boolean switch, so the allowed values
should be restricted to 0 and 1.
Add the necessary extra fields to the sysctl table entry to enforce that.
[ tglx: Rewrote changelog ]
Signed-off-by: Myungho Jung <mhjungk@gmail.com>
Link: http://lkml.kernel.org/r/1492640690-3550-1-git-send-email-mhjungk@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
kernel/sysctl.c | 2 ++
kernel/time/timer.c | 2 +-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index acf0a5a..0863769 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1176,6 +1176,8 @@ static struct ctl_table kern_table[] = {
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = timer_migration_handler,
+ .extra1 = &zero,
+ .extra2 = &one,
},
#endif
#ifdef CONFIG_BPF_SYSCALL
diff --git a/kernel/time/timer.c b/kernel/time/timer.c
index 1dc0256..cc6b6bd 100644
--- a/kernel/time/timer.c
+++ b/kernel/time/timer.c
@@ -241,7 +241,7 @@ int timer_migration_handler(struct ctl_table *table, int write,
int ret;
mutex_lock(&mutex);
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
+ ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
if (!ret && write)
timers_update_migration(false);
mutex_unlock(&mutex);
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] timer: fix timer_migration to accept only 0 and 1
2017-04-20 12:53 ` Thomas Gleixner
@ 2017-04-20 17:36 ` Myungho Jung
2017-04-20 17:45 ` Thomas Gleixner
0 siblings, 1 reply; 6+ messages in thread
From: Myungho Jung @ 2017-04-20 17:36 UTC (permalink / raw)
To: Thomas Gleixner; +Cc: linux-kernel
On Thu, Apr 20, 2017 at 02:53:26PM +0200, Thomas Gleixner wrote:
> On Wed, 19 Apr 2017, Myungho Jung wrote:
>
> > Error is not shown by setting invalid value to timer_migration. Valid
> > values for timer_migration should be restricted to 0 and 1. Testcase for
> > this bug is ltp/runpwtests06.
>
> While I agree with the change, I disagree with the changelog. Where is the bug?
>
> The timer code checks for timer_migration != 0 resp. == 0. So as long as
> the value is != 0 it's enabled, if it's 0 it is disabled.
>
> It's a correctness issue that we treat a sysctl which is basically a
> boolean as such. Ideally we'd have: proc_doboolvec() for such cases and
> convert all similar sysctls over to that.
>
> Thanks,
>
> tglx
I understood. I'll resubmit the patch after fixing log.
Thanks,
Myungho
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] timer: fix timer_migration to accept only 0 and 1
2017-04-20 17:36 ` Myungho Jung
@ 2017-04-20 17:45 ` Thomas Gleixner
2017-04-20 18:08 ` Myungho Jung
0 siblings, 1 reply; 6+ messages in thread
From: Thomas Gleixner @ 2017-04-20 17:45 UTC (permalink / raw)
To: Myungho Jung; +Cc: linux-kernel
On Thu, 20 Apr 2017, Myungho Jung wrote:
> I understood. I'll resubmit the patch after fixing log.
I recommend to check your inbox first.
Thanks,
tglx
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] timer: fix timer_migration to accept only 0 and 1
2017-04-20 17:45 ` Thomas Gleixner
@ 2017-04-20 18:08 ` Myungho Jung
0 siblings, 0 replies; 6+ messages in thread
From: Myungho Jung @ 2017-04-20 18:08 UTC (permalink / raw)
To: Thomas Gleixner; +Cc: linux-kernel
On Thu, Apr 20, 2017 at 07:45:49PM +0200, Thomas Gleixner wrote:
> On Thu, 20 Apr 2017, Myungho Jung wrote:
> > I understood. I'll resubmit the patch after fixing log.
>
> I recommend to check your inbox first.
>
> Thanks,
>
> tglx
Yes, I confirmed a message from tip-bot. I'll refer to it.
Thanks,
Myungho
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-04-20 18:08 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-04-19 22:24 [PATCH] timer: fix timer_migration to accept only 0 and 1 Myungho Jung
2017-04-20 12:53 ` Thomas Gleixner
2017-04-20 17:36 ` Myungho Jung
2017-04-20 17:45 ` Thomas Gleixner
2017-04-20 18:08 ` Myungho Jung
2017-04-20 13:14 ` [tip:timers/core] timer/sysclt: Restrict timer migration sysctl values to " tip-bot for Myungho Jung
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).