From: Stefan Agner <stefan@agner.ch>
To: dwmw2@infradead.org, computersforpeace@gmail.com,
boris.brezillon@free-electrons.com, marek.vasut@gmail.com,
richard@nod.at, cyrille.pitchen@atmel.com
Cc: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org,
kernel@pengutronix.de, han.xu@nxp.com,
fabio.estevam@freescale.com, LW@KARO-electronics.de,
linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Stefan Agner <stefan@agner.ch>
Subject: [PATCH v2 1/5] mtd: nand: gpmi: unify clock handling
Date: Fri, 21 Apr 2017 18:23:34 -0700 [thread overview]
Message-ID: <20170422012338.4635-2-stefan@agner.ch> (raw)
In-Reply-To: <20170422012338.4635-1-stefan@agner.ch>
Add device specific list of clocks required, and handle all clocks
in a single for loop. This avoids further code duplication when
adding i.MX 7 support.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
---
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 41 +++++++++++++++-------------------
drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 2 ++
2 files changed, 20 insertions(+), 23 deletions(-)
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index d52139635b67..c8bbf5da2ab8 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -82,6 +82,10 @@ static int gpmi_ooblayout_free(struct mtd_info *mtd, int section,
return 0;
}
+static const char * const gpmi_clks_for_mx2x[] = {
+ "gpmi_io",
+};
+
static const struct mtd_ooblayout_ops gpmi_ooblayout_ops = {
.ecc = gpmi_ooblayout_ecc,
.free = gpmi_ooblayout_free,
@@ -91,24 +95,36 @@ static const struct gpmi_devdata gpmi_devdata_imx23 = {
.type = IS_MX23,
.bch_max_ecc_strength = 20,
.max_chain_delay = 16,
+ .clks = gpmi_clks_for_mx2x,
+ .clks_count = ARRAY_SIZE(gpmi_clks_for_mx2x),
};
static const struct gpmi_devdata gpmi_devdata_imx28 = {
.type = IS_MX28,
.bch_max_ecc_strength = 20,
.max_chain_delay = 16,
+ .clks = gpmi_clks_for_mx2x,
+ .clks_count = ARRAY_SIZE(gpmi_clks_for_mx2x),
+};
+
+static const char * const gpmi_clks_for_mx6[] = {
+ "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch",
};
static const struct gpmi_devdata gpmi_devdata_imx6q = {
.type = IS_MX6Q,
.bch_max_ecc_strength = 40,
.max_chain_delay = 12,
+ .clks = gpmi_clks_for_mx6,
+ .clks_count = ARRAY_SIZE(gpmi_clks_for_mx6),
};
static const struct gpmi_devdata gpmi_devdata_imx6sx = {
.type = IS_MX6SX,
.bch_max_ecc_strength = 62,
.max_chain_delay = 12,
+ .clks = gpmi_clks_for_mx6,
+ .clks_count = ARRAY_SIZE(gpmi_clks_for_mx6),
};
static irqreturn_t bch_irq(int irq, void *cookie)
@@ -599,35 +615,14 @@ static int acquire_dma_channels(struct gpmi_nand_data *this)
return -EINVAL;
}
-static char *extra_clks_for_mx6q[GPMI_CLK_MAX] = {
- "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch",
-};
-
static int gpmi_get_clks(struct gpmi_nand_data *this)
{
struct resources *r = &this->resources;
- char **extra_clks = NULL;
struct clk *clk;
int err, i;
- /* The main clock is stored in the first. */
- r->clock[0] = devm_clk_get(this->dev, "gpmi_io");
- if (IS_ERR(r->clock[0])) {
- err = PTR_ERR(r->clock[0]);
- goto err_clock;
- }
-
- /* Get extra clocks */
- if (GPMI_IS_MX6(this))
- extra_clks = extra_clks_for_mx6q;
- if (!extra_clks)
- return 0;
-
- for (i = 1; i < GPMI_CLK_MAX; i++) {
- if (extra_clks[i - 1] == NULL)
- break;
-
- clk = devm_clk_get(this->dev, extra_clks[i - 1]);
+ for (i = 0; i < this->devdata->clks_count; i++) {
+ clk = devm_clk_get(this->dev, this->devdata->clks[i]);
if (IS_ERR(clk)) {
err = PTR_ERR(clk);
goto err_clock;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index 4e49a1f5fa27..8879c4eff25e 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -130,6 +130,8 @@ struct gpmi_devdata {
enum gpmi_type type;
int bch_max_ecc_strength;
int max_chain_delay; /* See the async EDO mode */
+ const char * const *clks;
+ const int clks_count;
};
struct gpmi_nand_data {
--
2.12.2
next prev parent reply other threads:[~2017-04-22 1:24 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-22 1:23 [PATCH v2 0/5] mtd: nand: gpmi: add i.MX 7 support Stefan Agner
2017-04-22 1:23 ` Stefan Agner [this message]
2017-04-22 1:23 ` [PATCH v2 2/5] mtd: nand: gpmi: add i.MX 7 SoC support Stefan Agner
2017-04-22 1:23 ` [PATCH v2 3/5] mtd: gpmi: document current clock requirements Stefan Agner
2017-04-28 17:13 ` Rob Herring
2017-04-22 1:23 ` [PATCH v2 4/5] ARM: dts: imx7: add GPMI NAND Stefan Agner
2017-05-04 19:13 ` Han Xu
2017-05-04 21:50 ` Stefan Agner
2017-05-04 22:59 ` Han Xu
2017-05-25 8:22 ` Stefan Agner
2017-04-22 1:23 ` [PATCH v2 5/5] ARM: dts: imx7-colibri: add NAND support Stefan Agner
2017-04-22 11:43 ` [PATCH v2 0/5] mtd: nand: gpmi: add i.MX 7 support Marek Vasut
2017-05-03 13:25 ` Shawn Guo
2017-05-15 19:38 ` Boris Brezillon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170422012338.4635-2-stefan@agner.ch \
--to=stefan@agner.ch \
--cc=LW@KARO-electronics.de \
--cc=boris.brezillon@free-electrons.com \
--cc=computersforpeace@gmail.com \
--cc=cyrille.pitchen@atmel.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=fabio.estevam@freescale.com \
--cc=han.xu@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=mark.rutland@arm.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).