From: Icenowy Zheng <icenowy@aosc.io>
To: Thomas Gleixner <tglx@linutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>, Lee Jones <lee.jones@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@googlegroups.com, Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH v4 09/10] arm64: allwinner: a64: enable AXP803 regulators for Pine64
Date: Tue, 25 Apr 2017 00:01:02 +0800 [thread overview]
Message-ID: <20170424160103.9447-10-icenowy@aosc.io> (raw)
In-Reply-To: <20170424160103.9447-1-icenowy@aosc.io>
Add support of AXP803 regulators in the Pine64 device tree, in order to
enable many future functionalities, e.g. Wi-Fi.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
.../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 109 +++++++++++++++++++++
1 file changed, 109 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 3e1b44292534..abc1879e91f2 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -106,6 +106,115 @@
};
};
+#include "axp803.dtsi"
+
+®_aldo1 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vcc-csi";
+};
+
+®_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dcdc6 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-sys";
+};
+
+®_dldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-hdmi";
+};
+
+®_dldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-mipi";
+};
+
+®_dldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "avdd-csi";
+};
+
+®_dldo4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+®_eldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "cpvdd";
+};
+
+®_eldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vdd-1v8-csi";
+};
+
+®_fldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-1v2-hsic";
+};
+
+®_fldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpus";
+};
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
--
2.12.2
next prev parent reply other threads:[~2017-04-24 16:03 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-24 16:00 [PATCH v4 00/10] AXP803 PMIC support for Pine64 Icenowy Zheng
2017-04-24 16:00 ` [PATCH v4 01/10] arm64: allwinner: a64: enable RSB on A64 Icenowy Zheng
2017-04-24 16:00 ` [PATCH v4 02/10] irqchip/sunxi-nmi: add A64 R_INTC to the binding doc Icenowy Zheng
2017-04-24 16:00 ` [PATCH v4 03/10] irqchip/sunxi-nmi: add support for the NMI in A64 R_INTC Icenowy Zheng
2017-04-24 16:11 ` icenowy
2017-04-24 16:00 ` [PATCH v4 04/10] arm64: allwinner: a64: add NMI (R_INTC) controller on A64 Icenowy Zheng
2017-04-24 16:00 ` [PATCH v4 05/10] arm64: allwinner: a64: add AXP803 node to Pine64 device tree Icenowy Zheng
2017-04-24 16:00 ` [PATCH v4 06/10] regulator: axp20x-regulator: add support for AXP803 Icenowy Zheng
2017-04-24 16:01 ` [PATCH v4 07/10] mfd: axp20x: add axp20x-regulator cell " Icenowy Zheng
2017-04-25 2:17 ` [linux-sunxi] " Chen-Yu Tsai
2017-04-25 5:47 ` icenowy
2017-04-25 7:57 ` Lee Jones
2017-04-25 8:37 ` [linux-sunxi] " Icenowy Zheng
2017-04-24 16:01 ` [PATCH v4 08/10] arm64: allwinner: a64: add DTSI file for AXP803 PMIC Icenowy Zheng
2017-04-24 16:01 ` Icenowy Zheng [this message]
2017-04-25 9:24 ` [linux-sunxi] [PATCH v4 09/10] arm64: allwinner: a64: enable AXP803 regulators for Pine64 Andre Przywara
2017-04-25 9:28 ` Icenowy Zheng
2017-04-24 16:01 ` [PATCH v4 10/10] arm64: allwinner: a64: enable Wi-Fi " Icenowy Zheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170424160103.9447-10-icenowy@aosc.io \
--to=icenowy@aosc.io \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).