[PATCH 1/2] power: supply: sbs-battery: Don't ignore the first external power change

[PATCH 1/2] power: supply: sbs-battery: Don't ignore the first external power change

[Paul Kocialkowski]

A mechanism to ignore the first external power change notification was
put in place years ago to ignore the power_supply_register notification.

However, this doesn't apply to the current situation anymore, as the
first notification is always the result of a legitimate power change.

This removes this deprecated mechanism, which puts back the driver's
state machine to a sane state (an ignored first notification previously
caused a charging/discharging status inversion).

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
---
 drivers/power/supply/sbs-battery.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/drivers/power/supply/sbs-battery.c b/drivers/power/supply/sbs-battery.c
index 8bb2eb38eb1c..3e7125c8e4d1 100644
--- a/drivers/power/supply/sbs-battery.c
+++ b/drivers/power/supply/sbs-battery.c
@@ -171,7 +171,6 @@ struct sbs_info {
 	u32				i2c_retry_count;
 	u32				poll_retry_count;
 	struct delayed_work		work;
-	int				ignore_changes;
 };
 
 static char model_name[I2C_SMBUS_BLOCK_MAX + 1];
@@ -694,11 +693,6 @@ static void sbs_external_power_changed(struct power_supply *psy)
 {
 	struct sbs_info *chip = power_supply_get_drvdata(psy);
 
-	if (chip->ignore_changes > 0) {
-		chip->ignore_changes--;
-		return;
-	}
-
 	/* cancel outstanding work */
 	cancel_delayed_work_sync(&chip->work);
 
@@ -775,10 +769,6 @@ static int sbs_probe(struct i2c_client *client,
 	chip->enable_detection = false;
 	psy_cfg.of_node = client->dev.of_node;
 	psy_cfg.drv_data = chip;
-	/* ignore first notification of external change, it is generated
-	 * from the power_supply_register call back
-	 */
-	chip->ignore_changes = 1;
 	chip->last_state = POWER_SUPPLY_STATUS_UNKNOWN;
 
 	/* use pdata if available, fall back to DT properties,
-- 
2.12.2

[PATCH 2/2] power: supply: sbs-battery: Correct supply status with current draw

[Paul Kocialkowski]

The status reported directly by the battery controller is not always
reliable and should be corrected based on the current draw information.

This implements such a correction with a dedicated function, called
where the supply status is retrieved.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
---
 drivers/power/supply/sbs-battery.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/power/supply/sbs-battery.c b/drivers/power/supply/sbs-battery.c
index 3e7125c8e4d1..29c4e277abf1 100644
--- a/drivers/power/supply/sbs-battery.c
+++ b/drivers/power/supply/sbs-battery.c
@@ -295,6 +295,31 @@ static int sbs_write_word_data(struct i2c_client *client, u8 address,
 	return 0;
 }
 
+static int sbs_status_correct(struct i2c_client *client, int *intval)
+{
+	int ret;
+
+	ret = sbs_read_word_data(client, sbs_data[REG_CURRENT].addr);
+	if (ret < 0)
+		return ret;
+
+	ret = (s16)ret;
+
+	/* Not drawing current means full (cannot be not charging) */
+	if (ret == 0)
+		*intval = POWER_SUPPLY_STATUS_FULL;
+
+	if (*intval == POWER_SUPPLY_STATUS_FULL) {
+		/* Drawing or providing current when full */
+		if (ret > 0)
+			*intval = POWER_SUPPLY_STATUS_CHARGING;
+		else if (ret < 0)
+			*intval = POWER_SUPPLY_STATUS_DISCHARGING;
+	}
+
+	return 0;
+}
+
 static int sbs_get_battery_presence_and_health(
 	struct i2c_client *client, enum power_supply_property psp,
 	union power_supply_propval *val)
@@ -401,6 +426,8 @@ static int sbs_get_battery_property(struct i2c_client *client,
 		else
 			val->intval = POWER_SUPPLY_STATUS_CHARGING;
 
+		sbs_status_correct(client, &val->intval);
+
 		if (chip->poll_time == 0)
 			chip->last_state = val->intval;
 		else if (chip->last_state != val->intval) {
@@ -721,6 +748,8 @@ static void sbs_delayed_work(struct work_struct *work)
 	else
 		ret = POWER_SUPPLY_STATUS_CHARGING;
 
+	sbs_status_correct(chip->client, &ret);
+
 	if (chip->last_state != ret) {
 		chip->poll_time = 0;
 		power_supply_changed(chip->power_supply);
-- 
2.12.2

Re: [PATCH 2/2] power: supply: sbs-battery: Correct supply status with current draw

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 432 bytes --]

Hi,

On Tue, Apr 25, 2017 at 05:09:05PM +0200, Paul Kocialkowski wrote:
> The status reported directly by the battery controller is not always
> reliable and should be corrected based on the current draw information.
> 
> This implements such a correction with a dedicated function, called
> where the supply status is retrieved.
> 
> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>

Thanks, queued.

-- Sebastian

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 1/2] power: supply: sbs-battery: Don't ignore the first external power change

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 671 bytes --]

Hi,

On Tue, Apr 25, 2017 at 05:09:04PM +0200, Paul Kocialkowski wrote:
> A mechanism to ignore the first external power change notification was
> put in place years ago to ignore the power_supply_register notification.
> 
> However, this doesn't apply to the current situation anymore, as the
> first notification is always the result of a legitimate power change.
> 
> This removes this deprecated mechanism, which puts back the driver's
> state machine to a sane state (an ignored first notification previously
> caused a charging/discharging status inversion).
> 
> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>

Thanks, queued.

-- Sebastian

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]