[PATCH v2 1/2] net: dsa: b53: Add compatible strings for the Cygnus-family BCM11360.

[PATCH v2 1/2] net: dsa: b53: Add compatible strings for the Cygnus-family BCM11360.

[Eric Anholt]

Cygnus is a small family of SoCs, of which we currently have
devicetree for BCM11360 and BCM58300.  The 11360's B53 is mostly the
same as 58xx, just requiring a tiny bit of setup that was previously
missing.

Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---

v2: Reorder the entry in the docs (suggestion by Scott Branden), add
    missing '"'

 Documentation/devicetree/bindings/net/dsa/b53.txt | 3 +++
 drivers/net/dsa/b53/b53_srab.c                    | 2 ++
 2 files changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt
index d6c6e41648d4..eb679e92d525 100644
--- a/Documentation/devicetree/bindings/net/dsa/b53.txt
+++ b/Documentation/devicetree/bindings/net/dsa/b53.txt
@@ -13,6 +13,9 @@ Required properties:
       "brcm,bcm5397"
       "brcm,bcm5398"
 
+  For the BCM11360 SoC, must be:
+      "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab" string
+
   For the BCM5310x SoCs with an integrated switch, must be one of:
       "brcm,bcm53010-srab"
       "brcm,bcm53011-srab"
diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c
index 8a62b6a69703..c37ffd1b6833 100644
--- a/drivers/net/dsa/b53/b53_srab.c
+++ b/drivers/net/dsa/b53/b53_srab.c
@@ -364,6 +364,7 @@ static const struct of_device_id b53_srab_of_match[] = {
 	{ .compatible = "brcm,bcm53018-srab" },
 	{ .compatible = "brcm,bcm53019-srab" },
 	{ .compatible = "brcm,bcm5301x-srab" },
+	{ .compatible = "brcm,bcm11360-srab", .data = (void *)BCM58XX_DEVICE_ID },
 	{ .compatible = "brcm,bcm58522-srab", .data = (void *)BCM58XX_DEVICE_ID },
 	{ .compatible = "brcm,bcm58525-srab", .data = (void *)BCM58XX_DEVICE_ID },
 	{ .compatible = "brcm,bcm58535-srab", .data = (void *)BCM58XX_DEVICE_ID },
@@ -371,6 +372,7 @@ static const struct of_device_id b53_srab_of_match[] = {
 	{ .compatible = "brcm,bcm58623-srab", .data = (void *)BCM58XX_DEVICE_ID },
 	{ .compatible = "brcm,bcm58625-srab", .data = (void *)BCM58XX_DEVICE_ID },
 	{ .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID },
+	{ .compatible = "brcm,cygnus-srab", .data = (void *)BCM58XX_DEVICE_ID },
 	{ .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID },
 	{ /* sentinel */ },
 };
-- 
2.11.0

[PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT.

[Eric Anholt]

Cygnus has a single AMAC controller connected to the B53 switch with 2
PHYs.  On the BCM911360_EP platform, those two PHYs are connected to
the external ethernet jacks.

Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---

v2: Call the node "switch", just call the ports "port" (suggestions by
    Florian), drop max-speed on the phys (suggestion by Andrew Lunn),
    call the other nodes "ethernet" and "ethernet-phy" (suggestions by
    Sergei Shtylyov)

 arch/arm/boot/dts/bcm-cygnus.dtsi      | 58 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/bcm911360_entphn.dts |  8 +++++
 2 files changed, 66 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 009f1346b817..9fd89be0f5e0 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -142,6 +142,54 @@
 			interrupts = <0>;
 		};
 
+		mdio: mdio@18002000 {
+			compatible = "brcm,iproc-mdio";
+			reg = <0x18002000 0x8>;
+			#size-cells = <1>;
+			#address-cells = <0>;
+
+			gphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			gphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		switch: switch@18007000 {
+			compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab";
+			reg = <0x18007000 0x1000>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					phy-handle = <&gphy0>;
+					phy-mode = "rgmii";
+				};
+
+				port@1 {
+					reg = <1>;
+					phy-handle = <&gphy1>;
+					phy-mode = "rgmii";
+				};
+
+				port@8 {
+					reg = <8>;
+					label = "cpu";
+					ethernet = <&eth0>;
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+
 		i2c0: i2c@18008000 {
 			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
 			reg = <0x18008000 0x100>;
@@ -295,6 +343,16 @@
 			status = "disabled";
 		};
 
+		eth0: ethernet@18042000 {
+			compatible = "brcm,amac";
+			reg = <0x18042000 0x1000>,
+			      <0x18110000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			max-speed = <1000>;
+			status = "disabled";
+		};
+
 		nand: nand@18046000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index 8b3800f46288..e037dea63f4a 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -57,6 +57,14 @@
 	};
 };
 
+&eth0 {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
 &uart3 {
 	status = "okay";
 };
-- 
2.11.0

Re: [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT.

[Florian Fainelli]

On 04/25/2017 04:53 PM, Eric Anholt wrote:
> Cygnus has a single AMAC controller connected to the B53 switch with 2
> PHYs.  On the BCM911360_EP platform, those two PHYs are connected to
> the external ethernet jacks.
> 
> Signed-off-by: Eric Anholt <eric@anholt.net>
> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
> 
> v2: Call the node "switch", just call the ports "port" (suggestions by
>     Florian), drop max-speed on the phys (suggestion by Andrew Lunn),
>     call the other nodes "ethernet" and "ethernet-phy" (suggestions by
>     Sergei Shtylyov)
> 
>  arch/arm/boot/dts/bcm-cygnus.dtsi      | 58 ++++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/bcm911360_entphn.dts |  8 +++++
>  2 files changed, 66 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
> index 009f1346b817..9fd89be0f5e0 100644
> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
> @@ -142,6 +142,54 @@
>  			interrupts = <0>;
>  		};
>  
> +		mdio: mdio@18002000 {
> +			compatible = "brcm,iproc-mdio";
> +			reg = <0x18002000 0x8>;
> +			#size-cells = <1>;
> +			#address-cells = <0>;

Sorry for not noticing earlier, since you override this correctly in the
board-level DTS file can you put a:

			status = "disabled"

property in there by default?

Thanks!

> +
> +			gphy0: ethernet-phy@0 {
> +				reg = <0>;
> +			};
> +
> +			gphy1: ethernet-phy@1 {
> +				reg = <1>;
> +			};
> +		};
> +
> +		switch: switch@18007000 {
> +			compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab";
> +			reg = <0x18007000 0x1000>;
> +			status = "disabled";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +					phy-handle = <&gphy0>;
> +					phy-mode = "rgmii";
> +				};
> +
> +				port@1 {
> +					reg = <1>;
> +					phy-handle = <&gphy1>;
> +					phy-mode = "rgmii";
> +				};
> +
> +				port@8 {
> +					reg = <8>;
> +					label = "cpu";
> +					ethernet = <&eth0>;
> +					fixed-link {
> +						speed = <1000>;
> +						full-duplex;
> +					};
> +				};
> +			};
> +		};
> +
>  		i2c0: i2c@18008000 {
>  			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
>  			reg = <0x18008000 0x100>;
> @@ -295,6 +343,16 @@
>  			status = "disabled";
>  		};
>  
> +		eth0: ethernet@18042000 {
> +			compatible = "brcm,amac";
> +			reg = <0x18042000 0x1000>,
> +			      <0x18110000 0x1000>;
> +			reg-names = "amac_base", "idm_base";
> +			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> +			max-speed = <1000>;
> +			status = "disabled";
> +		};
> +
>  		nand: nand@18046000 {
>  			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
>  			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
> diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
> index 8b3800f46288..e037dea63f4a 100644
> --- a/arch/arm/boot/dts/bcm911360_entphn.dts
> +++ b/arch/arm/boot/dts/bcm911360_entphn.dts
> @@ -57,6 +57,14 @@
>  	};
>  };
>  
> +&eth0 {
> +	status = "okay";
> +};
> +
> +&switch {
> +	status = "okay";
> +};
> +
>  &uart3 {
>  	status = "okay";
>  };
> 


-- 
Florian

Re: [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT.

[Eric Anholt]

[-- Attachment #1: Type: text/plain, Size: 1557 bytes --]

Florian Fainelli <f.fainelli@gmail.com> writes:

> On 04/25/2017 04:53 PM, Eric Anholt wrote:
>> Cygnus has a single AMAC controller connected to the B53 switch with 2
>> PHYs.  On the BCM911360_EP platform, those two PHYs are connected to
>> the external ethernet jacks.
>> 
>> Signed-off-by: Eric Anholt <eric@anholt.net>
>> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
>> ---
>> 
>> v2: Call the node "switch", just call the ports "port" (suggestions by
>>     Florian), drop max-speed on the phys (suggestion by Andrew Lunn),
>>     call the other nodes "ethernet" and "ethernet-phy" (suggestions by
>>     Sergei Shtylyov)
>> 
>>  arch/arm/boot/dts/bcm-cygnus.dtsi      | 58 ++++++++++++++++++++++++++++++++++
>>  arch/arm/boot/dts/bcm911360_entphn.dts |  8 +++++
>>  2 files changed, 66 insertions(+)
>> 
>> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
>> index 009f1346b817..9fd89be0f5e0 100644
>> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
>> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
>> @@ -142,6 +142,54 @@
>>  			interrupts = <0>;
>>  		};
>>  
>> +		mdio: mdio@18002000 {
>> +			compatible = "brcm,iproc-mdio";
>> +			reg = <0x18002000 0x8>;
>> +			#size-cells = <1>;
>> +			#address-cells = <0>;
>
> Sorry for not noticing earlier, since you override this correctly in the
> board-level DTS file can you put a:
>
> 			status = "disabled"
>
> property in there by default?

I didn't have the override in the board file either, just switch and
ethernet.  Fixed.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

Re: [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT.

[Eric Anholt]

[-- Attachment #1: Type: text/plain, Size: 1475 bytes --]

Florian Fainelli <f.fainelli@gmail.com> writes:

> On 04/25/2017 04:53 PM, Eric Anholt wrote:
>> Cygnus has a single AMAC controller connected to the B53 switch with 2
>> PHYs.  On the BCM911360_EP platform, those two PHYs are connected to
>> the external ethernet jacks.
>> 
>> Signed-off-by: Eric Anholt <eric@anholt.net>
>> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
>> ---
>> 
>> v2: Call the node "switch", just call the ports "port" (suggestions by
>>     Florian), drop max-speed on the phys (suggestion by Andrew Lunn),
>>     call the other nodes "ethernet" and "ethernet-phy" (suggestions by
>>     Sergei Shtylyov)
>> 
>>  arch/arm/boot/dts/bcm-cygnus.dtsi      | 58 ++++++++++++++++++++++++++++++++++
>>  arch/arm/boot/dts/bcm911360_entphn.dts |  8 +++++
>>  2 files changed, 66 insertions(+)
>> 
>> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
>> index 009f1346b817..9fd89be0f5e0 100644
>> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
>> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
>> @@ -142,6 +142,54 @@
>>  			interrupts = <0>;
>>  		};
>>  
>> +		mdio: mdio@18002000 {
>> +			compatible = "brcm,iproc-mdio";
>> +			reg = <0x18002000 0x8>;
>> +			#size-cells = <1>;
>> +			#address-cells = <0>;
>
> Sorry for not noticing earlier, since you override this correctly in the
> board-level DTS file can you put a:
>
> 			status = "disabled"
>
> property in there by default?

Done.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

Re: [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT.

[Andrew Lunn]

> +		eth0: ethernet@18042000 {
> +			compatible = "brcm,amac";
> +			reg = <0x18042000 0x1000>,
> +			      <0x18110000 0x1000>;
> +			reg-names = "amac_base", "idm_base";
> +			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> +			max-speed = <1000>;

Hi Eric

Sorry i missed this the first time. Does this Ethernet controller do >
1Gbps? Does this max-speed do anything useful?

       Andrew

Re: [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT.

[Eric Anholt]

[-- Attachment #1: Type: text/plain, Size: 469 bytes --]

Andrew Lunn <andrew@lunn.ch> writes:

>> +		eth0: ethernet@18042000 {
>> +			compatible = "brcm,amac";
>> +			reg = <0x18042000 0x1000>,
>> +			      <0x18110000 0x1000>;
>> +			reg-names = "amac_base", "idm_base";
>> +			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
>> +			max-speed = <1000>;
>
> Hi Eric
>
> Sorry i missed this the first time. Does this Ethernet controller do >
> 1Gbps? Does this max-speed do anything useful?

It doesn't look like it.  Dropped.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

Re: [PATCH v2 1/2] net: dsa: b53: Add compatible strings for the Cygnus-family BCM11360.

[Rob Herring]

On Tue, Apr 25, 2017 at 04:53:56PM -0700, Eric Anholt wrote:
> Cygnus is a small family of SoCs, of which we currently have
> devicetree for BCM11360 and BCM58300.  The 11360's B53 is mostly the
> same as 58xx, just requiring a tiny bit of setup that was previously
> missing.
> 
> Signed-off-by: Eric Anholt <eric@anholt.net>
> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
> 
> v2: Reorder the entry in the docs (suggestion by Scott Branden), add
>     missing '"'
> 
>  Documentation/devicetree/bindings/net/dsa/b53.txt | 3 +++
>  drivers/net/dsa/b53/b53_srab.c                    | 2 ++
>  2 files changed, 5 insertions(+)

Everyone learns the hard way that specific compatibles are needed.

Acked-by: Rob Herring <robh@kernel.org>

Rob