* [PATCH v2 1/2] net: dsa: b53: Add compatible strings for the Cygnus-family BCM11360.
@ 2017-04-25 23:53 Eric Anholt
2017-04-25 23:53 ` [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT Eric Anholt
2017-04-28 20:25 ` [PATCH v2 1/2] net: dsa: b53: Add compatible strings for the Cygnus-family BCM11360 Rob Herring
0 siblings, 2 replies; 8+ messages in thread
From: Eric Anholt @ 2017-04-25 23:53 UTC (permalink / raw)
To: Florian Fainelli, Vivien Didelot, Andrew Lunn, netdev,
Rob Herring, Mark Rutland, devicetree
Cc: linux-arm-kernel, linux-kernel, bcm-kernel-feedback-list,
Ray Jui, Scott Branden, Jon Mason, Eric Anholt
Cygnus is a small family of SoCs, of which we currently have
devicetree for BCM11360 and BCM58300. The 11360's B53 is mostly the
same as 58xx, just requiring a tiny bit of setup that was previously
missing.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
v2: Reorder the entry in the docs (suggestion by Scott Branden), add
missing '"'
Documentation/devicetree/bindings/net/dsa/b53.txt | 3 +++
drivers/net/dsa/b53/b53_srab.c | 2 ++
2 files changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt
index d6c6e41648d4..eb679e92d525 100644
--- a/Documentation/devicetree/bindings/net/dsa/b53.txt
+++ b/Documentation/devicetree/bindings/net/dsa/b53.txt
@@ -13,6 +13,9 @@ Required properties:
"brcm,bcm5397"
"brcm,bcm5398"
+ For the BCM11360 SoC, must be:
+ "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab" string
+
For the BCM5310x SoCs with an integrated switch, must be one of:
"brcm,bcm53010-srab"
"brcm,bcm53011-srab"
diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c
index 8a62b6a69703..c37ffd1b6833 100644
--- a/drivers/net/dsa/b53/b53_srab.c
+++ b/drivers/net/dsa/b53/b53_srab.c
@@ -364,6 +364,7 @@ static const struct of_device_id b53_srab_of_match[] = {
{ .compatible = "brcm,bcm53018-srab" },
{ .compatible = "brcm,bcm53019-srab" },
{ .compatible = "brcm,bcm5301x-srab" },
+ { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM58XX_DEVICE_ID },
{ .compatible = "brcm,bcm58522-srab", .data = (void *)BCM58XX_DEVICE_ID },
{ .compatible = "brcm,bcm58525-srab", .data = (void *)BCM58XX_DEVICE_ID },
{ .compatible = "brcm,bcm58535-srab", .data = (void *)BCM58XX_DEVICE_ID },
@@ -371,6 +372,7 @@ static const struct of_device_id b53_srab_of_match[] = {
{ .compatible = "brcm,bcm58623-srab", .data = (void *)BCM58XX_DEVICE_ID },
{ .compatible = "brcm,bcm58625-srab", .data = (void *)BCM58XX_DEVICE_ID },
{ .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID },
+ { .compatible = "brcm,cygnus-srab", .data = (void *)BCM58XX_DEVICE_ID },
{ .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID },
{ /* sentinel */ },
};
--
2.11.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT.
2017-04-25 23:53 [PATCH v2 1/2] net: dsa: b53: Add compatible strings for the Cygnus-family BCM11360 Eric Anholt
@ 2017-04-25 23:53 ` Eric Anholt
2017-04-25 23:59 ` Florian Fainelli
2017-04-26 0:49 ` Andrew Lunn
2017-04-28 20:25 ` [PATCH v2 1/2] net: dsa: b53: Add compatible strings for the Cygnus-family BCM11360 Rob Herring
1 sibling, 2 replies; 8+ messages in thread
From: Eric Anholt @ 2017-04-25 23:53 UTC (permalink / raw)
To: Florian Fainelli, Vivien Didelot, Andrew Lunn, netdev,
Rob Herring, Mark Rutland, devicetree
Cc: linux-arm-kernel, linux-kernel, bcm-kernel-feedback-list,
Ray Jui, Scott Branden, Jon Mason, Eric Anholt
Cygnus has a single AMAC controller connected to the B53 switch with 2
PHYs. On the BCM911360_EP platform, those two PHYs are connected to
the external ethernet jacks.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
v2: Call the node "switch", just call the ports "port" (suggestions by
Florian), drop max-speed on the phys (suggestion by Andrew Lunn),
call the other nodes "ethernet" and "ethernet-phy" (suggestions by
Sergei Shtylyov)
arch/arm/boot/dts/bcm-cygnus.dtsi | 58 ++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/bcm911360_entphn.dts | 8 +++++
2 files changed, 66 insertions(+)
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 009f1346b817..9fd89be0f5e0 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -142,6 +142,54 @@
interrupts = <0>;
};
+ mdio: mdio@18002000 {
+ compatible = "brcm,iproc-mdio";
+ reg = <0x18002000 0x8>;
+ #size-cells = <1>;
+ #address-cells = <0>;
+
+ gphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ gphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+
+ switch: switch@18007000 {
+ compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab";
+ reg = <0x18007000 0x1000>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ phy-handle = <&gphy0>;
+ phy-mode = "rgmii";
+ };
+
+ port@1 {
+ reg = <1>;
+ phy-handle = <&gphy1>;
+ phy-mode = "rgmii";
+ };
+
+ port@8 {
+ reg = <8>;
+ label = "cpu";
+ ethernet = <ð0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+
i2c0: i2c@18008000 {
compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
reg = <0x18008000 0x100>;
@@ -295,6 +343,16 @@
status = "disabled";
};
+ eth0: ethernet@18042000 {
+ compatible = "brcm,amac";
+ reg = <0x18042000 0x1000>,
+ <0x18110000 0x1000>;
+ reg-names = "amac_base", "idm_base";
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ max-speed = <1000>;
+ status = "disabled";
+ };
+
nand: nand@18046000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x18046000 0x600>, <0xf8105408 0x600>,
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index 8b3800f46288..e037dea63f4a 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -57,6 +57,14 @@
};
};
+ð0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
&uart3 {
status = "okay";
};
--
2.11.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT.
2017-04-25 23:53 ` [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT Eric Anholt
@ 2017-04-25 23:59 ` Florian Fainelli
2017-04-26 17:26 ` Eric Anholt
2017-04-26 17:26 ` Eric Anholt
2017-04-26 0:49 ` Andrew Lunn
1 sibling, 2 replies; 8+ messages in thread
From: Florian Fainelli @ 2017-04-25 23:59 UTC (permalink / raw)
To: Eric Anholt, Vivien Didelot, Andrew Lunn, netdev, Rob Herring,
Mark Rutland, devicetree
Cc: linux-arm-kernel, linux-kernel, bcm-kernel-feedback-list,
Ray Jui, Scott Branden, Jon Mason
On 04/25/2017 04:53 PM, Eric Anholt wrote:
> Cygnus has a single AMAC controller connected to the B53 switch with 2
> PHYs. On the BCM911360_EP platform, those two PHYs are connected to
> the external ethernet jacks.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>
> v2: Call the node "switch", just call the ports "port" (suggestions by
> Florian), drop max-speed on the phys (suggestion by Andrew Lunn),
> call the other nodes "ethernet" and "ethernet-phy" (suggestions by
> Sergei Shtylyov)
>
> arch/arm/boot/dts/bcm-cygnus.dtsi | 58 ++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/bcm911360_entphn.dts | 8 +++++
> 2 files changed, 66 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
> index 009f1346b817..9fd89be0f5e0 100644
> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
> @@ -142,6 +142,54 @@
> interrupts = <0>;
> };
>
> + mdio: mdio@18002000 {
> + compatible = "brcm,iproc-mdio";
> + reg = <0x18002000 0x8>;
> + #size-cells = <1>;
> + #address-cells = <0>;
Sorry for not noticing earlier, since you override this correctly in the
board-level DTS file can you put a:
status = "disabled"
property in there by default?
Thanks!
> +
> + gphy0: ethernet-phy@0 {
> + reg = <0>;
> + };
> +
> + gphy1: ethernet-phy@1 {
> + reg = <1>;
> + };
> + };
> +
> + switch: switch@18007000 {
> + compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab";
> + reg = <0x18007000 0x1000>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + phy-handle = <&gphy0>;
> + phy-mode = "rgmii";
> + };
> +
> + port@1 {
> + reg = <1>;
> + phy-handle = <&gphy1>;
> + phy-mode = "rgmii";
> + };
> +
> + port@8 {
> + reg = <8>;
> + label = "cpu";
> + ethernet = <ð0>;
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + };
> + };
> + };
> + };
> +
> i2c0: i2c@18008000 {
> compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
> reg = <0x18008000 0x100>;
> @@ -295,6 +343,16 @@
> status = "disabled";
> };
>
> + eth0: ethernet@18042000 {
> + compatible = "brcm,amac";
> + reg = <0x18042000 0x1000>,
> + <0x18110000 0x1000>;
> + reg-names = "amac_base", "idm_base";
> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> + max-speed = <1000>;
> + status = "disabled";
> + };
> +
> nand: nand@18046000 {
> compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
> reg = <0x18046000 0x600>, <0xf8105408 0x600>,
> diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
> index 8b3800f46288..e037dea63f4a 100644
> --- a/arch/arm/boot/dts/bcm911360_entphn.dts
> +++ b/arch/arm/boot/dts/bcm911360_entphn.dts
> @@ -57,6 +57,14 @@
> };
> };
>
> +ð0 {
> + status = "okay";
> +};
> +
> +&switch {
> + status = "okay";
> +};
> +
> &uart3 {
> status = "okay";
> };
>
--
Florian
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT.
2017-04-25 23:53 ` [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT Eric Anholt
2017-04-25 23:59 ` Florian Fainelli
@ 2017-04-26 0:49 ` Andrew Lunn
2017-04-26 17:25 ` Eric Anholt
1 sibling, 1 reply; 8+ messages in thread
From: Andrew Lunn @ 2017-04-26 0:49 UTC (permalink / raw)
To: Eric Anholt
Cc: Florian Fainelli, Vivien Didelot, netdev, Rob Herring,
Mark Rutland, devicetree, linux-arm-kernel, linux-kernel,
bcm-kernel-feedback-list, Ray Jui, Scott Branden, Jon Mason
> + eth0: ethernet@18042000 {
> + compatible = "brcm,amac";
> + reg = <0x18042000 0x1000>,
> + <0x18110000 0x1000>;
> + reg-names = "amac_base", "idm_base";
> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> + max-speed = <1000>;
Hi Eric
Sorry i missed this the first time. Does this Ethernet controller do >
1Gbps? Does this max-speed do anything useful?
Andrew
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT.
2017-04-26 0:49 ` Andrew Lunn
@ 2017-04-26 17:25 ` Eric Anholt
0 siblings, 0 replies; 8+ messages in thread
From: Eric Anholt @ 2017-04-26 17:25 UTC (permalink / raw)
To: Andrew Lunn
Cc: Florian Fainelli, Vivien Didelot, netdev, Rob Herring,
Mark Rutland, devicetree, linux-arm-kernel, linux-kernel,
bcm-kernel-feedback-list, Ray Jui, Scott Branden, Jon Mason
[-- Attachment #1: Type: text/plain, Size: 469 bytes --]
Andrew Lunn <andrew@lunn.ch> writes:
>> + eth0: ethernet@18042000 {
>> + compatible = "brcm,amac";
>> + reg = <0x18042000 0x1000>,
>> + <0x18110000 0x1000>;
>> + reg-names = "amac_base", "idm_base";
>> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
>> + max-speed = <1000>;
>
> Hi Eric
>
> Sorry i missed this the first time. Does this Ethernet controller do >
> 1Gbps? Does this max-speed do anything useful?
It doesn't look like it. Dropped.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT.
2017-04-25 23:59 ` Florian Fainelli
@ 2017-04-26 17:26 ` Eric Anholt
2017-04-26 17:26 ` Eric Anholt
1 sibling, 0 replies; 8+ messages in thread
From: Eric Anholt @ 2017-04-26 17:26 UTC (permalink / raw)
To: Florian Fainelli, Vivien Didelot, Andrew Lunn, netdev,
Rob Herring, Mark Rutland, devicetree
Cc: linux-arm-kernel, linux-kernel, bcm-kernel-feedback-list,
Ray Jui, Scott Branden, Jon Mason
[-- Attachment #1: Type: text/plain, Size: 1557 bytes --]
Florian Fainelli <f.fainelli@gmail.com> writes:
> On 04/25/2017 04:53 PM, Eric Anholt wrote:
>> Cygnus has a single AMAC controller connected to the B53 switch with 2
>> PHYs. On the BCM911360_EP platform, those two PHYs are connected to
>> the external ethernet jacks.
>>
>> Signed-off-by: Eric Anholt <eric@anholt.net>
>> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
>> ---
>>
>> v2: Call the node "switch", just call the ports "port" (suggestions by
>> Florian), drop max-speed on the phys (suggestion by Andrew Lunn),
>> call the other nodes "ethernet" and "ethernet-phy" (suggestions by
>> Sergei Shtylyov)
>>
>> arch/arm/boot/dts/bcm-cygnus.dtsi | 58 ++++++++++++++++++++++++++++++++++
>> arch/arm/boot/dts/bcm911360_entphn.dts | 8 +++++
>> 2 files changed, 66 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
>> index 009f1346b817..9fd89be0f5e0 100644
>> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
>> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
>> @@ -142,6 +142,54 @@
>> interrupts = <0>;
>> };
>>
>> + mdio: mdio@18002000 {
>> + compatible = "brcm,iproc-mdio";
>> + reg = <0x18002000 0x8>;
>> + #size-cells = <1>;
>> + #address-cells = <0>;
>
> Sorry for not noticing earlier, since you override this correctly in the
> board-level DTS file can you put a:
>
> status = "disabled"
>
> property in there by default?
I didn't have the override in the board file either, just switch and
ethernet. Fixed.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT.
2017-04-25 23:59 ` Florian Fainelli
2017-04-26 17:26 ` Eric Anholt
@ 2017-04-26 17:26 ` Eric Anholt
1 sibling, 0 replies; 8+ messages in thread
From: Eric Anholt @ 2017-04-26 17:26 UTC (permalink / raw)
To: Florian Fainelli, Vivien Didelot, Andrew Lunn, netdev,
Rob Herring, Mark Rutland, devicetree
Cc: linux-arm-kernel, linux-kernel, bcm-kernel-feedback-list,
Ray Jui, Scott Branden, Jon Mason
[-- Attachment #1: Type: text/plain, Size: 1475 bytes --]
Florian Fainelli <f.fainelli@gmail.com> writes:
> On 04/25/2017 04:53 PM, Eric Anholt wrote:
>> Cygnus has a single AMAC controller connected to the B53 switch with 2
>> PHYs. On the BCM911360_EP platform, those two PHYs are connected to
>> the external ethernet jacks.
>>
>> Signed-off-by: Eric Anholt <eric@anholt.net>
>> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
>> ---
>>
>> v2: Call the node "switch", just call the ports "port" (suggestions by
>> Florian), drop max-speed on the phys (suggestion by Andrew Lunn),
>> call the other nodes "ethernet" and "ethernet-phy" (suggestions by
>> Sergei Shtylyov)
>>
>> arch/arm/boot/dts/bcm-cygnus.dtsi | 58 ++++++++++++++++++++++++++++++++++
>> arch/arm/boot/dts/bcm911360_entphn.dts | 8 +++++
>> 2 files changed, 66 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
>> index 009f1346b817..9fd89be0f5e0 100644
>> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
>> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
>> @@ -142,6 +142,54 @@
>> interrupts = <0>;
>> };
>>
>> + mdio: mdio@18002000 {
>> + compatible = "brcm,iproc-mdio";
>> + reg = <0x18002000 0x8>;
>> + #size-cells = <1>;
>> + #address-cells = <0>;
>
> Sorry for not noticing earlier, since you override this correctly in the
> board-level DTS file can you put a:
>
> status = "disabled"
>
> property in there by default?
Done.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 1/2] net: dsa: b53: Add compatible strings for the Cygnus-family BCM11360.
2017-04-25 23:53 [PATCH v2 1/2] net: dsa: b53: Add compatible strings for the Cygnus-family BCM11360 Eric Anholt
2017-04-25 23:53 ` [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT Eric Anholt
@ 2017-04-28 20:25 ` Rob Herring
1 sibling, 0 replies; 8+ messages in thread
From: Rob Herring @ 2017-04-28 20:25 UTC (permalink / raw)
To: Eric Anholt
Cc: Florian Fainelli, Vivien Didelot, Andrew Lunn, netdev,
Mark Rutland, devicetree, linux-arm-kernel, linux-kernel,
bcm-kernel-feedback-list, Ray Jui, Scott Branden, Jon Mason
On Tue, Apr 25, 2017 at 04:53:56PM -0700, Eric Anholt wrote:
> Cygnus is a small family of SoCs, of which we currently have
> devicetree for BCM11360 and BCM58300. The 11360's B53 is mostly the
> same as 58xx, just requiring a tiny bit of setup that was previously
> missing.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>
> v2: Reorder the entry in the docs (suggestion by Scott Branden), add
> missing '"'
>
> Documentation/devicetree/bindings/net/dsa/b53.txt | 3 +++
> drivers/net/dsa/b53/b53_srab.c | 2 ++
> 2 files changed, 5 insertions(+)
Everyone learns the hard way that specific compatibles are needed.
Acked-by: Rob Herring <robh@kernel.org>
Rob
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2017-04-28 20:25 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-04-25 23:53 [PATCH v2 1/2] net: dsa: b53: Add compatible strings for the Cygnus-family BCM11360 Eric Anholt
2017-04-25 23:53 ` [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT Eric Anholt
2017-04-25 23:59 ` Florian Fainelli
2017-04-26 17:26 ` Eric Anholt
2017-04-26 17:26 ` Eric Anholt
2017-04-26 0:49 ` Andrew Lunn
2017-04-26 17:25 ` Eric Anholt
2017-04-28 20:25 ` [PATCH v2 1/2] net: dsa: b53: Add compatible strings for the Cygnus-family BCM11360 Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).