* [PATCH] staging: ks7010: remove line continuations in quoted strings @ 2017-04-28 14:19 Ilia Sergachev 2017-04-28 14:26 ` Dan Carpenter 2017-04-28 15:30 ` [PATCH v2] " Ilia Sergachev 0 siblings, 2 replies; 5+ messages in thread From: Ilia Sergachev @ 2017-04-28 14:19 UTC (permalink / raw) To: Greg Kroah-Hartman; +Cc: devel, linux-kernel, Ilia Sergachev Checkpatch emits WARNING: Avoid line continuations in quoted strings. Remove line continuations - split strings using quotes. Signed-off-by: Ilia Sergachev <ilia.sergachev@unibas.ch> --- drivers/staging/ks7010/ks_hostif.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/staging/ks7010/ks_hostif.c b/drivers/staging/ks7010/ks_hostif.c index 7151f16e2f9c..a0c632a52f48 100644 --- a/drivers/staging/ks7010/ks_hostif.c +++ b/drivers/staging/ks7010/ks_hostif.c @@ -191,9 +191,15 @@ int get_current_ap(struct ks_wlan_private *priv, struct link_ap_info_t *ap_info) wireless_send_event(netdev, SIOCGIWAP, &wrqu, NULL); } DPRINTK(4, "\n Link AP\n"); - DPRINTK(4, " bssid=%02X:%02X:%02X:%02X:%02X:%02X\n \ - essid=%s\n rate_set=%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X\n channel=%d\n \ - rssi=%d\n sq=%d\n capability=%04X\n", ap->bssid[0], ap->bssid[1], ap->bssid[2], ap->bssid[3], ap->bssid[4], ap->bssid[5], &(ap->ssid.body[0]), ap->rate_set.body[0], ap->rate_set.body[1], ap->rate_set.body[2], ap->rate_set.body[3], ap->rate_set.body[4], ap->rate_set.body[5], ap->rate_set.body[6], ap->rate_set.body[7], ap->channel, ap->rssi, ap->sq, ap->capability); + DPRINTK(4, " bssid=%02X:%02X:%02X:%02X:%02X:%02X\n" + " essid=%s\n rate_set=%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X\n" + " channel=%d\n rssi=%d\n sq=%d\n capability=%04X\n", + ap->bssid[0], ap->bssid[1], ap->bssid[2], + ap->bssid[3], ap->bssid[4], ap->bssid[5], + &(ap->ssid.body[0]), ap->rate_set.body[0], ap->rate_set.body[1], + ap->rate_set.body[2], ap->rate_set.body[3], ap->rate_set.body[4], + ap->rate_set.body[5], ap->rate_set.body[6], ap->rate_set.body[7], + ap->channel, ap->rssi, ap->sq, ap->capability); DPRINTK(4, "\n Link AP\n rsn.mode=%d\n rsn.size=%d\n", ap_info->rsn_mode, ap_info->rsn.size); DPRINTK(4, "\n ext_rate_set_size=%d\n rate_set_size=%d\n", @@ -1014,9 +1020,11 @@ void hostif_phy_information_confirm(struct ks_wlan_private *priv) wstats->qual.noise = 0; /* invalid noise value */ wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; - DPRINTK(3, "\n rssi=%u\n signal=%u\n LinkSpeed=%ux500Kbps\n \ - TransmittedFrameCount=%u\n ReceivedFragmentCount=%u\n FailedCount=%u\n \ - FCSErrorCount=%u\n", rssi, signal, LinkSpeed, TransmittedFrameCount, ReceivedFragmentCount, FailedCount, FCSErrorCount); + DPRINTK(3, "\n rssi=%u\n signal=%u\n LinkSpeed=%ux500Kbps\n" + " TransmittedFrameCount=%u\n ReceivedFragmentCount=%u\n" + " FailedCount=%u\n FCSErrorCount=%u\n", + rssi, signal, LinkSpeed, TransmittedFrameCount, + ReceivedFragmentCount, FailedCount, FCSErrorCount); /* wake_up_interruptible_all(&priv->confirm_wait); */ complete(&priv->confirm_wait); -- 2.11.0 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] staging: ks7010: remove line continuations in quoted strings 2017-04-28 14:19 [PATCH] staging: ks7010: remove line continuations in quoted strings Ilia Sergachev @ 2017-04-28 14:26 ` Dan Carpenter 2017-04-28 16:45 ` Joe Perches 2017-04-30 9:05 ` Tobin C. Harding 2017-04-28 15:30 ` [PATCH v2] " Ilia Sergachev 1 sibling, 2 replies; 5+ messages in thread From: Dan Carpenter @ 2017-04-28 14:26 UTC (permalink / raw) To: Ilia Sergachev; +Cc: Greg Kroah-Hartman, devel, linux-kernel On Fri, Apr 28, 2017 at 04:19:28PM +0200, Ilia Sergachev wrote: > Checkpatch emits WARNING: Avoid line continuations in quoted strings. > > Remove line continuations - split strings using quotes. > > Signed-off-by: Ilia Sergachev <ilia.sergachev@unibas.ch> > --- > drivers/staging/ks7010/ks_hostif.c | 20 ++++++++++++++------ > 1 file changed, 14 insertions(+), 6 deletions(-) > > diff --git a/drivers/staging/ks7010/ks_hostif.c b/drivers/staging/ks7010/ks_hostif.c > index 7151f16e2f9c..a0c632a52f48 100644 > --- a/drivers/staging/ks7010/ks_hostif.c > +++ b/drivers/staging/ks7010/ks_hostif.c > @@ -191,9 +191,15 @@ int get_current_ap(struct ks_wlan_private *priv, struct link_ap_info_t *ap_info) > wireless_send_event(netdev, SIOCGIWAP, &wrqu, NULL); > } > DPRINTK(4, "\n Link AP\n"); > - DPRINTK(4, " bssid=%02X:%02X:%02X:%02X:%02X:%02X\n \ > - essid=%s\n rate_set=%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X\n channel=%d\n \ > - rssi=%d\n sq=%d\n capability=%04X\n", ap->bssid[0], ap->bssid[1], ap->bssid[2], ap->bssid[3], ap->bssid[4], ap->bssid[5], &(ap->ssid.body[0]), ap->rate_set.body[0], ap->rate_set.body[1], ap->rate_set.body[2], ap->rate_set.body[3], ap->rate_set.body[4], ap->rate_set.body[5], ap->rate_set.body[6], ap->rate_set.body[7], ap->channel, ap->rssi, ap->sq, ap->capability); > + DPRINTK(4, " bssid=%02X:%02X:%02X:%02X:%02X:%02X\n" > + " essid=%s\n rate_set=%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X\n" > + " channel=%d\n rssi=%d\n sq=%d\n capability=%04X\n", > + ap->bssid[0], ap->bssid[1], ap->bssid[2], > + ap->bssid[3], ap->bssid[4], ap->bssid[5], > + &(ap->ssid.body[0]), ap->rate_set.body[0], ap->rate_set.body[1], > + ap->rate_set.body[2], ap->rate_set.body[3], ap->rate_set.body[4], > + ap->rate_set.body[5], ap->rate_set.body[6], ap->rate_set.body[7], > + ap->channel, ap->rssi, ap->sq, ap->capability); Could you indent it like this: DPRINTK(4, " bssid=%02X:%02X:%02X:%02X:%02X:%02X\n" " essid=%s\n rate_set=%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X\n" " channel=%d\n rssi=%d\n sq=%d\n capability=%04X\n", ap->bssid[0], ap->bssid[1], ap->bssid[2], ap->bssid[3], ap->bssid[4], ap->bssid[5], &(ap->ssid.body[0]), ap->rate_set.body[0], ap->rate_set.body[1], ap->rate_set.body[2], ap->rate_set.body[3], ap->rate_set.body[4], ap->rate_set.body[5], ap->rate_set.body[6], ap->rate_set.body[7], ap->channel, ap->rssi, ap->sq, ap->capability); And actually it might be more readable to break it up more: DPRINTK(4, " bssid=%02X:%02X:%02X:%02X:%02X:%02X\n" " essid=%s\n" " rate_set=%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X\n" " channel=%d\n" " rssi=%d\n" " sq=%d\n" " capability=%04X\n", ap->bssid[0], ap->bssid[1], ap->bssid[2], ap->bssid[3], ap->bssid[4], ap->bssid[5], &(ap->ssid.body[0]), ap->rate_set.body[0], ap->rate_set.body[1], ap->rate_set.body[2], ap->rate_set.body[3], ap->rate_set.body[4], ap->rate_set.body[5], ap->rate_set.body[6], ap->rate_set.body[7], ap->channel, ap->rssi, ap->sq, ap->capability); Except that's not really how newlines are supposed to work in dmesg... Whatever. regards, dan carpenter ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] staging: ks7010: remove line continuations in quoted strings 2017-04-28 14:26 ` Dan Carpenter @ 2017-04-28 16:45 ` Joe Perches 2017-04-30 9:05 ` Tobin C. Harding 1 sibling, 0 replies; 5+ messages in thread From: Joe Perches @ 2017-04-28 16:45 UTC (permalink / raw) To: Dan Carpenter, Ilia Sergachev; +Cc: Greg Kroah-Hartman, devel, linux-kernel On Fri, 2017-04-28 at 17:26 +0300, Dan Carpenter wrote: > On Fri, Apr 28, 2017 at 04:19:28PM +0200, Ilia Sergachev wrote: > > Checkpatch emits WARNING: Avoid line continuations in quoted strings. > > > > Remove line continuations - split strings using quotes. > > > > Signed-off-by: Ilia Sergachev <ilia.sergachev@unibas.ch> > > --- > > drivers/staging/ks7010/ks_hostif.c | 20 ++++++++++++++------ > > 1 file changed, 14 insertions(+), 6 deletions(-) > > > > diff --git a/drivers/staging/ks7010/ks_hostif.c b/drivers/staging/ks7010/ks_hostif.c > > index 7151f16e2f9c..a0c632a52f48 100644 > > --- a/drivers/staging/ks7010/ks_hostif.c > > +++ b/drivers/staging/ks7010/ks_hostif.c > > @@ -191,9 +191,15 @@ int get_current_ap(struct ks_wlan_private *priv, struct link_ap_info_t *ap_info) > > wireless_send_event(netdev, SIOCGIWAP, &wrqu, NULL); > > } > > DPRINTK(4, "\n Link AP\n"); > > - DPRINTK(4, " bssid=%02X:%02X:%02X:%02X:%02X:%02X\n \ > > - essid=%s\n rate_set=%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X\n channel=%d\n \ > > - rssi=%d\n sq=%d\n capability=%04X\n", ap->bssid[0], ap->bssid[1], ap->bssid[2], ap->bssid[3], ap->bssid[4], ap->bssid[5], &(ap->ssid.body[0]), ap->rate_set.body[0], ap->rate_set.body[1], ap->rate_set.body[2], ap->rate_set.body[3], ap->rate_set.body[4], ap->rate_set.body[5], ap->rate_set.body[6], ap->rate_set.body[7], ap->channel, ap->rssi, ap->sq, ap->capability); > > + DPRINTK(4, " bssid=%02X:%02X:%02X:%02X:%02bX:%02X\n" > > + " essid=%s\n rate_set=%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X\n" > > + " channel=%d\n rssi=%d\n sq=%d\n capability=%04X\n", > > + ap->bssid[0], ap->bssid[1], ap->bssid[2], > > + ap->bssid[3], ap->bssid[4], ap->bssid[5], > > + &(ap->ssid.body[0]), ap->rate_set.body[0], ap->rate_set.body[1], > > + ap->rate_set.body[2], ap->rate_set.body[3], ap->rate_set.body[4], > > + ap->rate_set.body[5], ap->rate_set.body[6], ap->rate_set.body[7], > > + ap->channel, ap->rssi, ap->sq, ap->capability); > > Could you indent it like this: > > DPRINTK(4, " bssid=%02X:%02X:%02X:%02X:%02X:%02X\n" > " essid=%s\n rate_set=%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X\n" > " channel=%d\n rssi=%d\n sq=%d\n capability=%04X\n", > ap->bssid[0], ap->bssid[1], ap->bssid[2], > ap->bssid[3], ap->bssid[4], ap->bssid[5], > &(ap->ssid.body[0]), ap->rate_set.body[0], ap->rate_set.body[1], > ap->rate_set.body[2], ap->rate_set.body[3], ap->rate_set.body[4], > ap->rate_set.body[5], ap->rate_set.body[6], ap->rate_set.body[7], > ap->channel, ap->rssi, ap->sq, ap->capability); > > And actually it might be more readable to break it up more: > > DPRINTK(4, " bssid=%02X:%02X:%02X:%02X:%02X:%02X\n" > " essid=%s\n" > " rate_set=%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X\n" > " channel=%d\n" > " rssi=%d\n" > " sq=%d\n" > " capability=%04X\n", > ap->bssid[0], ap->bssid[1], ap->bssid[2], > ap->bssid[3], ap->bssid[4], ap->bssid[5], > &(ap->ssid.body[0]), ap->rate_set.body[0], ap->rate_set.body[1], > ap->rate_set.body[2], ap->rate_set.body[3], ap->rate_set.body[4], > ap->rate_set.body[5], ap->rate_set.body[6], ap->rate_set.body[7], > ap->channel, ap->rssi, ap->sq, ap->capability); And it might be smaller object code for some arches to use one DPRINTK call for each line. Probably more readable in the logs too with each line timestamped instead of just the first line. (and use %pM assuming bssid is char) DPRINTK(4, " bssid=%pM\n", ap->bssid); DPRINTK(4, " essud=%s\n", ap->ssid.body); DPRINTK(4, " rate_set=%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X\n", ap->rate_set.body[0], ap->rate_set.body[1], ap->rate_set.body[2], ap->rate_set.body[3], ap->rate_set.body[4], ap->rate_set.body[5], ap->rate_set.body[6], ap->rate_set.body[7]); DPRINTK(4, " channel=%d\n", ap->channel); DPRINTK(4, " rssi=%d\n", ap->rssi); DPRINTK(4, " sq=%d\n", ap->sq); DPRINTK(4, " capability=%04X\n", ap->capability); ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] staging: ks7010: remove line continuations in quoted strings 2017-04-28 14:26 ` Dan Carpenter 2017-04-28 16:45 ` Joe Perches @ 2017-04-30 9:05 ` Tobin C. Harding 1 sibling, 0 replies; 5+ messages in thread From: Tobin C. Harding @ 2017-04-30 9:05 UTC (permalink / raw) To: Dan Carpenter; +Cc: Ilia Sergachev, devel, Greg Kroah-Hartman, linux-kernel On Fri, Apr 28, 2017 at 05:26:17PM +0300, Dan Carpenter wrote: > On Fri, Apr 28, 2017 at 04:19:28PM +0200, Ilia Sergachev wrote: > > Checkpatch emits WARNING: Avoid line continuations in quoted strings. > > > > Remove line continuations - split strings using quotes. > > > > Signed-off-by: Ilia Sergachev <ilia.sergachev@unibas.ch> > > --- > > drivers/staging/ks7010/ks_hostif.c | 20 ++++++++++++++------ > > 1 file changed, 14 insertions(+), 6 deletions(-) > > > > diff --git a/drivers/staging/ks7010/ks_hostif.c b/drivers/staging/ks7010/ks_hostif.c > > index 7151f16e2f9c..a0c632a52f48 100644 > > --- a/drivers/staging/ks7010/ks_hostif.c > > +++ b/drivers/staging/ks7010/ks_hostif.c > > @@ -191,9 +191,15 @@ int get_current_ap(struct ks_wlan_private *priv, struct link_ap_info_t *ap_info) > > wireless_send_event(netdev, SIOCGIWAP, &wrqu, NULL); > > } > > DPRINTK(4, "\n Link AP\n"); > > - DPRINTK(4, " bssid=%02X:%02X:%02X:%02X:%02X:%02X\n \ > > - essid=%s\n rate_set=%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X\n channel=%d\n \ > > - rssi=%d\n sq=%d\n capability=%04X\n", ap->bssid[0], ap->bssid[1], ap->bssid[2], ap->bssid[3], ap->bssid[4], ap->bssid[5], &(ap->ssid.body[0]), ap->rate_set.body[0], ap->rate_set.body[1], ap->rate_set.body[2], ap->rate_set.body[3], ap->rate_set.body[4], ap->rate_set.body[5], ap->rate_set.body[6], ap->rate_set.body[7], ap->channel, ap->rssi, ap->sq, ap->capability); > > + DPRINTK(4, " bssid=%02X:%02X:%02X:%02X:%02X:%02X\n" > > + " essid=%s\n rate_set=%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X\n" > > + " channel=%d\n rssi=%d\n sq=%d\n capability=%04X\n", > > + ap->bssid[0], ap->bssid[1], ap->bssid[2], > > + ap->bssid[3], ap->bssid[4], ap->bssid[5], > > + &(ap->ssid.body[0]), ap->rate_set.body[0], ap->rate_set.body[1], > > + ap->rate_set.body[2], ap->rate_set.body[3], ap->rate_set.body[4], > > + ap->rate_set.body[5], ap->rate_set.body[6], ap->rate_set.body[7], > > + ap->channel, ap->rssi, ap->sq, ap->capability); > > Could you indent it like this: > > DPRINTK(4, " bssid=%02X:%02X:%02X:%02X:%02X:%02X\n" > " essid=%s\n rate_set=%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X\n" > " channel=%d\n rssi=%d\n sq=%d\n capability=%04X\n", > ap->bssid[0], ap->bssid[1], ap->bssid[2], > ap->bssid[3], ap->bssid[4], ap->bssid[5], > &(ap->ssid.body[0]), ap->rate_set.body[0], ap->rate_set.body[1], > ap->rate_set.body[2], ap->rate_set.body[3], ap->rate_set.body[4], > ap->rate_set.body[5], ap->rate_set.body[6], ap->rate_set.body[7], > ap->channel, ap->rssi, ap->sq, ap->capability); > > And actually it might be more readable to break it up more: > > DPRINTK(4, " bssid=%02X:%02X:%02X:%02X:%02X:%02X\n" > " essid=%s\n" > " rate_set=%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X\n" > " channel=%d\n" > " rssi=%d\n" > " sq=%d\n" > " capability=%04X\n", > ap->bssid[0], ap->bssid[1], ap->bssid[2], > ap->bssid[3], ap->bssid[4], ap->bssid[5], > &(ap->ssid.body[0]), ap->rate_set.body[0], ap->rate_set.body[1], > ap->rate_set.body[2], ap->rate_set.body[3], ap->rate_set.body[4], > ap->rate_set.body[5], ap->rate_set.body[6], ap->rate_set.body[7], > ap->channel, ap->rssi, ap->sq, ap->capability); > > Except that's not really how newlines are supposed to work in dmesg... > Whatever. This driver is full of these DPRINTK's, I would like to see them gone once some more testing is done. I don't see any nice way to keep them without upsetting checkpatch. It may not be worth bothering with them for now. thanks, Tobin. ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v2] staging: ks7010: remove line continuations in quoted strings 2017-04-28 14:19 [PATCH] staging: ks7010: remove line continuations in quoted strings Ilia Sergachev 2017-04-28 14:26 ` Dan Carpenter @ 2017-04-28 15:30 ` Ilia Sergachev 1 sibling, 0 replies; 5+ messages in thread From: Ilia Sergachev @ 2017-04-28 15:30 UTC (permalink / raw) To: Greg Kroah-Hartman; +Cc: devel, linux-kernel, Ilia Sergachev Checkpatch emits WARNING: Avoid line continuations in quoted strings. Remove line continuations - split strings using quotes. Signed-off-by: Ilia Sergachev <ilia.sergachev@unibas.ch> --- Changes for v4: - improve indentation for better readability drivers/staging/ks7010/ks_hostif.c | 30 ++++++++++++++++++++++++------ 1 file changed, 24 insertions(+), 6 deletions(-) diff --git a/drivers/staging/ks7010/ks_hostif.c b/drivers/staging/ks7010/ks_hostif.c index 7151f16e2f9c..ad8c09dd2ed1 100644 --- a/drivers/staging/ks7010/ks_hostif.c +++ b/drivers/staging/ks7010/ks_hostif.c @@ -191,9 +191,21 @@ int get_current_ap(struct ks_wlan_private *priv, struct link_ap_info_t *ap_info) wireless_send_event(netdev, SIOCGIWAP, &wrqu, NULL); } DPRINTK(4, "\n Link AP\n"); - DPRINTK(4, " bssid=%02X:%02X:%02X:%02X:%02X:%02X\n \ - essid=%s\n rate_set=%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X\n channel=%d\n \ - rssi=%d\n sq=%d\n capability=%04X\n", ap->bssid[0], ap->bssid[1], ap->bssid[2], ap->bssid[3], ap->bssid[4], ap->bssid[5], &(ap->ssid.body[0]), ap->rate_set.body[0], ap->rate_set.body[1], ap->rate_set.body[2], ap->rate_set.body[3], ap->rate_set.body[4], ap->rate_set.body[5], ap->rate_set.body[6], ap->rate_set.body[7], ap->channel, ap->rssi, ap->sq, ap->capability); + DPRINTK(4, " bssid=%02X:%02X:%02X:%02X:%02X:%02X\n" + " essid=%s\n" + " rate_set=%02X,%02X,%02X,%02X,%02X,%02X,%02X,%02X\n" + " channel=%d\n" + " rssi=%d\n" + " sq=%d\n" + " capability=%04X\n", + ap->bssid[0], ap->bssid[1], ap->bssid[2], + ap->bssid[3], ap->bssid[4], ap->bssid[5], + &(ap->ssid.body[0]), + ap->rate_set.body[0], ap->rate_set.body[1], + ap->rate_set.body[2], ap->rate_set.body[3], + ap->rate_set.body[4], ap->rate_set.body[5], + ap->rate_set.body[6], ap->rate_set.body[7], + ap->channel, ap->rssi, ap->sq, ap->capability); DPRINTK(4, "\n Link AP\n rsn.mode=%d\n rsn.size=%d\n", ap_info->rsn_mode, ap_info->rsn.size); DPRINTK(4, "\n ext_rate_set_size=%d\n rate_set_size=%d\n", @@ -1014,9 +1026,15 @@ void hostif_phy_information_confirm(struct ks_wlan_private *priv) wstats->qual.noise = 0; /* invalid noise value */ wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; - DPRINTK(3, "\n rssi=%u\n signal=%u\n LinkSpeed=%ux500Kbps\n \ - TransmittedFrameCount=%u\n ReceivedFragmentCount=%u\n FailedCount=%u\n \ - FCSErrorCount=%u\n", rssi, signal, LinkSpeed, TransmittedFrameCount, ReceivedFragmentCount, FailedCount, FCSErrorCount); + DPRINTK(3, "\n rssi=%u\n" + " signal=%u\n" + " LinkSpeed=%ux500Kbps\n" + " TransmittedFrameCount=%u\n" + " ReceivedFragmentCount=%u\n" + " FailedCount=%u\n" + " FCSErrorCount=%u\n", + rssi, signal, LinkSpeed, TransmittedFrameCount, + ReceivedFragmentCount, FailedCount, FCSErrorCount); /* wake_up_interruptible_all(&priv->confirm_wait); */ complete(&priv->confirm_wait); -- 2.11.0 ^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-04-30 9:05 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-04-28 14:19 [PATCH] staging: ks7010: remove line continuations in quoted strings Ilia Sergachev 2017-04-28 14:26 ` Dan Carpenter 2017-04-28 16:45 ` Joe Perches 2017-04-30 9:05 ` Tobin C. Harding 2017-04-28 15:30 ` [PATCH v2] " Ilia Sergachev
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).