From: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
To: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, kernel@savoirfairelinux.com,
"David S. Miller" <davem@davemloft.net>,
Florian Fainelli <f.fainelli@gmail.com>,
Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Subject: [PATCH net-next v2 01/18] net: dsa: mv88e6xxx: add max VID to info
Date: Mon, 1 May 2017 14:05:10 -0400 [thread overview]
Message-ID: <20170501180527.11756-2-vivien.didelot@savoirfairelinux.com> (raw)
In-Reply-To: <20170501180527.11756-1-vivien.didelot@savoirfairelinux.com>
Some chips don't have a VLAN Table Unit, most of them do have a 4K
table, some others as the 88E6390 family has a 13th bit for the VID.
Add a new max_vid member to the info structure, used to check the
presence of a VTU as well as the value used to iterate from in VTU
GetNext operations.
This makes the MV88E6XXX_FLAG_VTU obsolete, thus remove it.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
drivers/net/dsa/mv88e6xxx/chip.c | 38 ++++++++++++++++++++++++++---------
drivers/net/dsa/mv88e6xxx/mv88e6xxx.h | 13 ++----------
2 files changed, 31 insertions(+), 20 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 44ba8cff5631..e45ddf3e90e8 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -1440,7 +1440,7 @@ static int mv88e6xxx_port_vlan_dump(struct dsa_switch *ds, int port,
u16 pvid;
int err;
- if (!mv88e6xxx_has(chip, MV88E6XXX_FLAG_VTU))
+ if (!chip->info->max_vid)
return -EOPNOTSUPP;
mutex_lock(&chip->reg_lock);
@@ -1478,7 +1478,7 @@ static int mv88e6xxx_port_vlan_dump(struct dsa_switch *ds, int port,
err = cb(&vlan->obj);
if (err)
break;
- } while (next.vid < GLOBAL_VTU_VID_MASK);
+ } while (next.vid < chip->info->max_vid);
unlock:
mutex_unlock(&chip->reg_lock);
@@ -1640,7 +1640,7 @@ static int mv88e6xxx_atu_new(struct mv88e6xxx_chip *chip, u16 *fid)
break;
set_bit(vlan.fid, fid_bitmap);
- } while (vlan.vid < GLOBAL_VTU_VID_MASK);
+ } while (vlan.vid < chip->info->max_vid);
/* The reset value 0x000 is used to indicate that multiple address
* databases are not needed. Return the next positive available.
@@ -1799,7 +1799,7 @@ static int mv88e6xxx_port_vlan_filtering(struct dsa_switch *ds, int port,
PORT_CONTROL_2_8021Q_DISABLED;
int err;
- if (!mv88e6xxx_has(chip, MV88E6XXX_FLAG_VTU))
+ if (!chip->info->max_vid)
return -EOPNOTSUPP;
mutex_lock(&chip->reg_lock);
@@ -1817,7 +1817,7 @@ mv88e6xxx_port_vlan_prepare(struct dsa_switch *ds, int port,
struct mv88e6xxx_chip *chip = ds->priv;
int err;
- if (!mv88e6xxx_has(chip, MV88E6XXX_FLAG_VTU))
+ if (!chip->info->max_vid)
return -EOPNOTSUPP;
/* If the requested port doesn't belong to the same bridge as the VLAN
@@ -1860,7 +1860,7 @@ static void mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port,
bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
u16 vid;
- if (!mv88e6xxx_has(chip, MV88E6XXX_FLAG_VTU))
+ if (!chip->info->max_vid)
return;
mutex_lock(&chip->reg_lock);
@@ -1921,7 +1921,7 @@ static int mv88e6xxx_port_vlan_del(struct dsa_switch *ds, int port,
u16 pvid, vid;
int err = 0;
- if (!mv88e6xxx_has(chip, MV88E6XXX_FLAG_VTU))
+ if (!chip->info->max_vid)
return -EOPNOTSUPP;
mutex_lock(&chip->reg_lock);
@@ -2090,7 +2090,7 @@ static int mv88e6xxx_port_db_dump(struct mv88e6xxx_chip *chip, int port,
int (*cb)(struct switchdev_obj *obj))
{
struct mv88e6xxx_vtu_entry vlan = {
- .vid = GLOBAL_VTU_VID_MASK, /* all ones */
+ .vid = chip->info->max_vid,
};
u16 fid;
int err;
@@ -2121,7 +2121,7 @@ static int mv88e6xxx_port_db_dump(struct mv88e6xxx_chip *chip, int port,
obj, cb);
if (err)
return err;
- } while (vlan.vid < GLOBAL_VTU_VID_MASK);
+ } while (vlan.vid < chip->info->max_vid);
return err;
}
@@ -3685,6 +3685,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6085",
.num_databases = 4096,
.num_ports = 10,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 15000,
@@ -3702,6 +3703,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6095/88E6095F",
.num_databases = 256,
.num_ports = 11,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 15000,
@@ -3718,6 +3720,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6097/88E6097F",
.num_databases = 4096,
.num_ports = 11,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 15000,
@@ -3735,6 +3738,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6123",
.num_databases = 4096,
.num_ports = 3,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 15000,
@@ -3752,6 +3756,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6131",
.num_databases = 256,
.num_ports = 8,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 15000,
@@ -3768,6 +3773,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6341",
.num_databases = 4096,
.num_ports = 6,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 3750,
@@ -3784,6 +3790,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6161",
.num_databases = 4096,
.num_ports = 6,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 15000,
@@ -3801,6 +3808,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6165",
.num_databases = 4096,
.num_ports = 6,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 15000,
@@ -3818,6 +3826,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6171",
.num_databases = 4096,
.num_ports = 7,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 15000,
@@ -3835,6 +3844,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6172",
.num_databases = 4096,
.num_ports = 7,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 15000,
@@ -3852,6 +3862,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6175",
.num_databases = 4096,
.num_ports = 7,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 15000,
@@ -3869,6 +3880,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6176",
.num_databases = 4096,
.num_ports = 7,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 15000,
@@ -3886,6 +3898,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6185",
.num_databases = 256,
.num_ports = 10,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 15000,
@@ -3953,6 +3966,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6240",
.num_databases = 4096,
.num_ports = 7,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 15000,
@@ -3987,6 +4001,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6320",
.num_databases = 4096,
.num_ports = 7,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 15000,
@@ -4004,6 +4019,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6321",
.num_databases = 4096,
.num_ports = 7,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 15000,
@@ -4020,6 +4036,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6341",
.num_databases = 4096,
.num_ports = 6,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 3750,
@@ -4036,6 +4053,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6350",
.num_databases = 4096,
.num_ports = 7,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 15000,
@@ -4053,6 +4071,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6351",
.num_databases = 4096,
.num_ports = 7,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 15000,
@@ -4070,6 +4089,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.name = "Marvell 88E6352",
.num_databases = 4096,
.num_ports = 7,
+ .max_vid = 4095,
.port_base_addr = 0x10,
.global1_addr = 0x1b,
.age_time_coeff = 15000,
diff --git a/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
index c8f54986996b..5695ca206620 100644
--- a/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
@@ -567,7 +567,6 @@ enum mv88e6xxx_cap {
#define MV88E6XXX_FLAG_G2_POT BIT_ULL(MV88E6XXX_CAP_G2_POT)
#define MV88E6XXX_FLAG_STU BIT_ULL(MV88E6XXX_CAP_STU)
-#define MV88E6XXX_FLAG_VTU BIT_ULL(MV88E6XXX_CAP_VTU)
/* Ingress Rate Limit unit */
#define MV88E6XXX_FLAGS_IRL \
@@ -587,7 +586,6 @@ enum mv88e6xxx_cap {
#define MV88E6XXX_FLAGS_FAMILY_6095 \
(MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
- MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_MULTI_CHIP)
#define MV88E6XXX_FLAGS_FAMILY_6097 \
@@ -598,7 +596,6 @@ enum mv88e6xxx_cap {
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAG_STU | \
- MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP)
@@ -610,7 +607,6 @@ enum mv88e6xxx_cap {
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAG_STU | \
- MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP)
@@ -618,8 +614,7 @@ enum mv88e6xxx_cap {
(MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_G2_INT | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
- MV88E6XXX_FLAGS_MULTI_CHIP | \
- MV88E6XXX_FLAG_VTU)
+ MV88E6XXX_FLAGS_MULTI_CHIP)
#define MV88E6XXX_FLAGS_FAMILY_6320 \
(MV88E6XXX_FLAG_EEE | \
@@ -627,7 +622,6 @@ enum mv88e6xxx_cap {
MV88E6XXX_FLAG_G2_MGMT_EN_2X | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
- MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP)
@@ -638,7 +632,6 @@ enum mv88e6xxx_cap {
MV88E6XXX_FLAG_G2_INT | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAG_STU | \
- MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP | \
MV88E6XXX_FLAGS_SERDES)
@@ -651,7 +644,6 @@ enum mv88e6xxx_cap {
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAG_STU | \
- MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP)
@@ -664,7 +656,6 @@ enum mv88e6xxx_cap {
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAG_STU | \
- MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP | \
MV88E6XXX_FLAGS_SERDES)
@@ -674,7 +665,6 @@ enum mv88e6xxx_cap {
MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_G2_INT | \
MV88E6XXX_FLAG_STU | \
- MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP)
@@ -686,6 +676,7 @@ struct mv88e6xxx_info {
const char *name;
unsigned int num_databases;
unsigned int num_ports;
+ unsigned int max_vid;
unsigned int port_base_addr;
unsigned int global1_addr;
unsigned int age_time_coeff;
--
2.12.2
next prev parent reply other threads:[~2017-05-01 18:14 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-01 18:05 [PATCH net-next v2 00/18] net: dsa: mv88e6xxx: 802.1s and 88E6390 VTU Vivien Didelot
2017-05-01 18:05 ` Vivien Didelot [this message]
2017-05-01 18:05 ` [PATCH net-next v2 02/18] net: dsa: mv88e6xxx: split VTU entry data member Vivien Didelot
2017-05-01 18:05 ` [PATCH net-next v2 03/18] net: dsa: mv88e6xxx: move VTU Operation accessors Vivien Didelot
2017-05-01 18:05 ` [PATCH net-next v2 04/18] net: dsa: mv88e6xxx: move VTU flush Vivien Didelot
2017-05-01 18:05 ` [PATCH net-next v2 05/18] net: dsa: mv88e6xxx: move VTU FID accessors Vivien Didelot
2017-05-01 18:05 ` [PATCH net-next v2 06/18] net: dsa: mv88e6xxx: move VTU SID accessors Vivien Didelot
2017-05-01 18:05 ` [PATCH net-next v2 07/18] net: dsa: mv88e6xxx: move VTU VID accessors Vivien Didelot
2017-05-01 18:05 ` [PATCH net-next v2 08/18] net: dsa: mv88e6xxx: move generic VTU GetNext Vivien Didelot
2017-05-01 18:05 ` [PATCH net-next v2 09/18] net: dsa: mv88e6xxx: move VTU Data accessors Vivien Didelot
2017-05-01 18:05 ` [PATCH net-next v2 10/18] net: dsa: mv88e6xxx: move STU GetNext operation Vivien Didelot
2017-05-01 18:05 ` [PATCH net-next v2 11/18] net: dsa: mv88e6xxx: get STU entry on VTU GetNext Vivien Didelot
2017-05-01 18:05 ` [PATCH net-next v2 12/18] net: dsa: mv88e6xxx: load STU entry with VTU entry Vivien Didelot
2017-05-01 18:05 ` [PATCH net-next v2 13/18] net: dsa: mv88e6xxx: add VTU GetNext operation Vivien Didelot
2017-05-01 18:05 ` [PATCH net-next v2 14/18] net: dsa: mv88e6xxx: add VTU Load/Purge operation Vivien Didelot
2017-05-01 18:05 ` [PATCH net-next v2 15/18] net: dsa: mv88e6xxx: make VTU helpers static Vivien Didelot
2017-05-01 18:05 ` [PATCH net-next v2 16/18] net: dsa: mv88e6xxx: simplify VTU entry getter Vivien Didelot
2017-05-01 18:05 ` [PATCH net-next v2 17/18] net: dsa: mv88e6xxx: support the VTU Page bit Vivien Didelot
2017-05-01 18:05 ` [PATCH net-next v2 18/18] net: dsa: mv88e6xxx: add VTU support for 88E6390 Vivien Didelot
2017-05-01 19:03 ` [PATCH net-next v2 00/18] net: dsa: mv88e6xxx: 802.1s and 88E6390 VTU David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170501180527.11756-2-vivien.didelot@savoirfairelinux.com \
--to=vivien.didelot@savoirfairelinux.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=kernel@savoirfairelinux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).