* [git pull] Input updates for v4.11-rc0
@ 2017-05-03 18:50 Dmitry Torokhov
0 siblings, 0 replies; 2+ messages in thread
From: Dmitry Torokhov @ 2017-05-03 18:50 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel, linux-input
Hi Linus,
Please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git for-linus
to receive updates for the input subsystem. You will get:
- a big update from Mauro converting input documentation to ReST format
- Synaptics PS/2 is now aware of SMBus companion devices, which means that
we can now use native RMI4 protocol to handle touchpads, instead of
relying on legacy PS/2 mode.
- we removed support from BMA180 accelerometer from input devices as it is
now handled properly by IIO
- update to TSC2007 to corretcly report pressure
- other miscellaneous driver fixes.
Note that you will get a merge conflict in Documentation/input/ff.rst.
Please resolve it as follows:
"
See <uapi/linux/input.h> for a description of the ff_effect struct. You should
also find help in a few sketches, contained in files shape.svg and
interactive.svg:
"
Changelog:
---------
Benjamin Tissoires (2):
Input: psmouse - add support for SMBus companions
Input: synaptics - add support for Intertouch devices
Cameron Gutman (1):
Input: xpad - support some quirky Xbox One pads
Christophe JAILLET (1):
Input: omap-keypad - fix error handling code
Damien Riegel (4):
Input: pm8xxx-vib - reorder header alphabetically
Input: pm8xxx-vib - parametrize the driver
Input: pm8xxx-vib - handle separate enable register
Input: pm8xxx-vib - add support for pm8916's vibrator
David Jander (1):
Input: ads7846 - avoid pen up/down when reading hwmon
David Rivshin (1):
Input: matrix_keypad - add option to drive inactive columns
Dmitry Torokhov (54):
Input: tsc2007 - switch to using input_set_capability()
Input: ad7879 - convert to use regmap
Input: ad7879 - use more devm interfaces
Input: ad7879 - allow exporting AUX/VBAT/GPIO pin via device property
Input: tca8418_keypad - remove double read of key event register
Input: ad7879 - make sure we set up drvdata
Input: ad7879 - return plain error code from ad7879_probe()
Input: ad7879 - try parsing properties on non-DT systems
Input: ad7879 - do not manipulate capability bits directly
Input: dm355evm_keys - remove use of sparse_keymap_free
Input: wistron_btns - remove use of sparse_keymap_free
Input: dm355evm_keys - switch to using managed resources
Input: synaptics - do not mix logical and bitwise operations
Input: serio - add fast reconnect option
Input: psmouse - implement fast reconnect option
Input: psmouse - store pointer to current protocol
Input: psmouse - introduce notion of SMBus companions
Input: synaptics - split device info into a separate structure
Input: melfas_mip4 - ensure that device is present
i2c: export i2c_client_type structure
i2c: copy device properties when using i2c_register_board_info()
i2c: allow attaching IRQ resources to i2c_board_info
Input: psmouse - fix cleaning up SMBus companions
Input: psmouse - use i2c_client_type to locate i2c clients
Input: synaptics - add synaptics_query_int()
Input: synaptics - use BIT() and GENMASK() macros
Input: synaptics - do not abuse -1 as return value
Input: synaptics - use u8 instead of unsigned char
Input: synaptics-rmi4 - fix handling failures from rmi_enable_sensor
Input: synaptics-rmi4 - fix endianness issue in SMBus transport
Input: synaptics-rmi4 - cleanup SMbus mapping handling
Input: synaptics-rmi4 - when registering sensors do not call them "drivers"
Input: eeti_ts - rename eeti_ts_priv to eeti_ts
Input: eeti_ts - use BIT(n)
Input: eeti_ts - use get_unaligned_be16() to retrieve data
Input: eeti_ts - use input_set_capability()
Input: eeti_ts - switch to using managed resources
Input: eeti_ts - respect interrupt set in client structure
Input: eeti_ts - use gpio_get_value_cansleep
Input: eeti_ts - switch to using threaded interrupt
Input: eeti_ts - expect platform code to set interrupt trigger
Input: eeti_ts - switch to gpiod API
Input: ar1021_i2c - fix too long name in driver's device table
Input: ar1021_i2c - do not force raising edge IRQ trigger
Input: move documentation for Amiga CD32
Input: rotary-encoder - remove references to platform data from docs
Input: fix "Game console" heading level in joystick documentation
Input: docs - remove disclaimer/GPL notice
Input: docs - update joystick documentation a bit
Input: docs - note that MT-A protocol is obsolete
Input: docs - split input docs into kernel- and user-facing
Input: docs - freshen up introduction
Input: xpad - do not suggest writing to Dominic
ARM: pxa/raumfeld: fix compile error in rotary controller resources
Fabio Estevam (2):
Input: imx6ul_tsc - fix error handling
Input: lpc32xx_ts - check for clk_prepare_enable() error
Geliang Tang (4):
Input: db9 - use setup_timer
Input: gameport - use setup_timer
Input: locomokbd - use setup_timer
Input: turbografx - use setup_timer
Guan Ben (1):
Input: pwm-beeper - support customized freq for SND_BELL
H. Nikolaus Schaller (6):
Input: tsc2007 - check for presence and power down tsc2007 during probe
Input: tsc2007 - add iio interface to read external ADC input and temperature
Input: tsc2007 - rename function tsc2007_calculate_pressure
Input: tsc2007 - correctly report pressure and not resistance to user space
Input: ad7846 - move bindings to touchscreen subdirectory
Input: bma150 - remove support for bma150
Hans de Goede (7):
Input: axp20x-pek - use our own device for errors
Input: axp20x_pek - add axp20x_pek_probe_input_device helper
Input: axp20x-pek - do not register input device on some systems
Input: soc_button_array - use NULL for GPIO connection ID
Input: soc_button_array - get rid of MAX_NBUTTONS
Input: soc_button_array - add support for ACPI 6.0 Generic Button Device
Input: soc_button_array - properly map usage 0x07/0xe3 to KEY_LEFTMETA
Jagan Teki (2):
Input: max11801_ts - add missing of_match_table
dt-bindings: input: touchscreen: add max11801-ts binding
Javier Martinez Canillas (4):
Input: silead - add OF device ID table
Input: synaptics_i2c - add OF device ID table
Input: qt1070 - add OF device ID table
Input: silead - list all supported compatible strings in binding document
Jingkui Wang (1):
Input: drv260x - remove OF dependency
Joe Perches (1):
Input: convert remaining uses of pr_warning to pr_warn
Juergen Gross (1):
Input: xen-kbdfront - add module parameter for setting resolution
Marcos Paulo de Souza (1):
Input: add uinput documentation
Martin Kepplinger (7):
Input: sur40 - fix bad endianness handling in sur40_poll
Input: yealink - define packet offset __be16 instead of u16
Input: ar1021_i2c - coding style fixes
Input: ar1021_i2c - highlight support for AR1020
dt-bindings: input: add bindings document for ar1021_i2c driver
Input: ar1021_i2c - enable touch mode during open
Input: ar1021_i2c - use BIT to check for a bit
Mauro Carvalho Chehab (35):
Input: docs - convert input.txt into ReST format
Input: ALPS - convert documentation into ReST format
Input: amijoy - convert documentation into ReST format
Input: appletouch - convert documentation into ReST format
Input: atarikbd - convert documentation into ReST format
Input: bcm5974 - convert documentation into ReST format
Input: db9/CD32 - convert documentation into ReST format
Input: cma3000_d0x - convert documentation into ReST format
Input: cs461x - convert documentation into ReST format
Input: elantech - convert documentation into ReST format
Input: convert event codes documentation into ReST format
Input: convert force feedback documentation into ReST format
Input: convert gamepad specification into ReST format
Input: convert gameport programming documentation into ReST format
Input: gpio-tilt - convert documentation into ReST format
Input: iforce - convert documentation into ReST format
Input: convert input-programming doc into ReST format
Input: convert joystick-api doc into ReST format
Input: joystick - convert documentation into ReST format
Input: joystick-parport - convert documentation into ReST format
Input: convert multi-touch protocol spec into ReST format
Input: convert keyboard notifier docs into ReST format
Input: ntrig - convert documentation into ReST format
Input: rotary-encoder - convert documentation into to ReST format
Input: sentelic - convert documentation into ReST format
Input: userio - convert documentation into ReST format
Input: walkera0701 - convert documentation into ReST format
Input: xpad - convert documentation into ReST format
Input: yealink - convert documentation into ReST format
Input: create a book with Linux Input documentation
Input: docs - convert shape.fig from xfig to svg
Input: docs - convert interactive.fig from xfig to svg
Input: use svg files instead of xfig in force feedback documentation
Input: xpad - note that usb/devices is now at /sys/kernel/debug/
Input: xpad - don't use literal blocks inside footnotes
Michael Hennerich (3):
Input: ad7879-spi - remove bits_per_word = 16 enforcement
Input: ad7879 - update MODULE_AUTHOR email address
Input: ad7879 - add SPI device tree binding example
Michał Kępień (1):
Input: sparse-keymap - use a managed allocation for keymap copy
Nick Dyer (3):
Input: synaptics-rmi4 - use dev_driver_string when registering interrupt
Input: synaptics-rmi4 - change F12 clip to inactive border debug
Input: synaptics-rmi4 - enable IRQ operation in F34 V7
Pali Rohár (3):
Input: alps - move ALPS_PROTO_V4 out of alps_model_data table
Input: alps - warn about unsupported ALPS V9 touchpad
Input: alps - cleanup alps_model_data
Rahul Bedarkar (1):
dt-bindings: input: rotary-encoder: fix typo
Rajat Jain (1):
Input: cros_ec_keyb - add an EC event for sysrq
Randy Dunlap (1):
Input: ad7879 - add header file to fix ad7879.c build errors
Sebastian Reichel (2):
Input: twl4030-pwrbutton - use correct device for irq request
Input: twl4030-pwrbutton - use input_set_capability() helper
Yegor Yefremov (1):
Input: tps6507x-ts - update to devm_* API
Diffstat:
--------
Documentation/conf.py | 2 +
.../bindings/input/gpio-matrix-keypad.txt | 2 +
.../devicetree/bindings/input/pwm-beeper.txt | 1 +
.../devicetree/bindings/input/qcom,pm8xxx-vib.txt | 1 +
.../devicetree/bindings/input/rotary-encoder.txt | 2 +-
.../bindings/input/touchscreen/ad7879.txt | 19 +
.../bindings/input/{ => touchscreen}/ads7846.txt | 0
.../bindings/input/touchscreen/ar1021.txt | 16 +
.../bindings/input/touchscreen/max11801-ts.txt | 18 +
.../bindings/input/touchscreen/silead_gsl1680.txt | 7 +-
Documentation/input/cd32.txt | 19 -
Documentation/input/conf.py | 10 +
Documentation/input/{alps.txt => devices/alps.rst} | 45 +-
.../input/{amijoy.txt => devices/amijoy.rst} | 179 ++--
.../{appletouch.txt => devices/appletouch.rst} | 45 +-
.../input/{atarikbd.txt => devices/atarikbd.rst} | 225 +++--
.../input/{bcm5974.txt => devices/bcm5974.rst} | 43 +-
.../{cma3000_d0x.txt => devices/cma3000_d0x.rst} | 74 +-
.../input/{cs461x.txt => devices/cs461x.rst} | 28 +-
.../{edt-ft5x06.txt => devices/edt-ft5x06.rst} | 0
.../input/{elantech.txt => devices/elantech.rst} | 306 ++++---
Documentation/input/devices/gpio-tilt.rst | 103 +++
Documentation/input/devices/iforce-protocol.rst | 381 ++++++++
Documentation/input/devices/index.rst | 19 +
Documentation/input/devices/joystick-parport.rst | 611 +++++++++++++
.../input/{ntrig.txt => devices/ntrig.rst} | 49 +-
.../rotary-encoder.rst} | 117 +--
Documentation/input/devices/sentelic.rst | 901 +++++++++++++++++++
.../{walkera0701.txt => devices/walkera0701.rst} | 51 +-
Documentation/input/{xpad.txt => devices/xpad.rst} | 143 +--
.../input/{yealink.txt => devices/yealink.rst} | 173 ++--
.../input/{event-codes.txt => event-codes.rst} | 134 ++-
Documentation/input/{ff.txt => ff.rst} | 206 +++--
Documentation/input/{gamepad.txt => gamepad.rst} | 94 +-
...rt-programming.txt => gameport-programming.rst} | 83 +-
Documentation/input/gpio-tilt.txt | 103 ---
Documentation/input/iforce-protocol.txt | 258 ------
Documentation/input/index.rst | 20 +
...input-programming.txt => input-programming.rst} | 268 +++---
Documentation/input/input.rst | 281 ++++++
Documentation/input/input.txt | 290 ------
Documentation/input/input_kapi.rst | 17 +
Documentation/input/input_uapi.rst | 22 +
Documentation/input/interactive.fig | 42 -
Documentation/input/interactive.svg | 24 +
Documentation/input/joydev/index.rst | 18 +
.../{joystick-api.txt => joydev/joystick-api.rst} | 160 ++--
Documentation/input/joydev/joystick.rst | 585 ++++++++++++
Documentation/input/joystick-parport.txt | 542 ------------
Documentation/input/joystick.txt | 586 ------------
...touch-protocol.txt => multi-touch-protocol.rst} | 206 +++--
Documentation/input/{notifier.txt => notifier.rst} | 10 +-
Documentation/input/sentelic.txt | 873 ------------------
Documentation/input/shape.fig | 65 --
Documentation/input/shape.svg | 39 +
Documentation/input/uinput.rst | 245 ++++++
Documentation/input/{userio.txt => userio.rst} | 79 +-
MAINTAINERS | 4 +-
arch/arm/mach-pxa/raumfeld.c | 24 +-
drivers/i2c/i2c-boardinfo.c | 24 +
drivers/i2c/i2c-core.c | 34 +-
drivers/input/gameport/gameport.c | 9 +-
drivers/input/joystick/db9.c | 4 +-
drivers/input/joystick/gamecon.c | 3 +-
drivers/input/joystick/turbografx.c | 4 +-
drivers/input/joystick/xpad.c | 114 ++-
drivers/input/keyboard/cros_ec_keyb.c | 7 +
drivers/input/keyboard/locomokbd.c | 5 +-
drivers/input/keyboard/matrix_keypad.c | 13 +-
drivers/input/keyboard/omap4-keypad.c | 2 +-
drivers/input/keyboard/qt1070.c | 9 +
drivers/input/keyboard/tca8418_keypad.c | 2 -
drivers/input/misc/Kconfig | 2 +-
drivers/input/misc/apanel.c | 3 +-
drivers/input/misc/axp20x-pek.c | 62 +-
drivers/input/misc/bma150.c | 11 +-
drivers/input/misc/dm355evm_keys.c | 79 +-
drivers/input/misc/drv260x.c | 4 +-
drivers/input/misc/pm8xxx-vibrator.c | 78 +-
drivers/input/misc/pwm-beeper.c | 15 +-
drivers/input/misc/soc_button_array.c | 182 +++-
drivers/input/misc/twl4030-pwrbutton.c | 5 +-
drivers/input/misc/wistron_btns.c | 5 +-
drivers/input/misc/xen-kbdfront.c | 45 +-
drivers/input/misc/yealink.h | 2 +-
drivers/input/mouse/Kconfig | 16 +
drivers/input/mouse/Makefile | 2 +
drivers/input/mouse/alps.c | 76 +-
drivers/input/mouse/alps.h | 6 +-
drivers/input/mouse/psmouse-base.c | 216 +++--
drivers/input/mouse/psmouse-smbus.c | 302 +++++++
drivers/input/mouse/psmouse.h | 102 ++-
drivers/input/mouse/synaptics.c | 980 +++++++++++++--------
drivers/input/mouse/synaptics.h | 154 ++--
drivers/input/mouse/synaptics_i2c.c | 9 +
drivers/input/rmi4/rmi_driver.c | 13 +-
drivers/input/rmi4/rmi_f12.c | 18 +-
drivers/input/rmi4/rmi_f34.c | 27 +-
drivers/input/rmi4/rmi_f34.h | 7 +-
drivers/input/rmi4/rmi_f34v7.c | 117 +--
drivers/input/rmi4/rmi_i2c.c | 51 +-
drivers/input/rmi4/rmi_smbus.c | 94 +-
drivers/input/rmi4/rmi_spi.c | 44 +-
drivers/input/serio/serio.c | 30 +-
drivers/input/sparse-keymap.c | 39 +-
drivers/input/touchscreen/Kconfig | 18 +-
drivers/input/touchscreen/Makefile | 2 +
drivers/input/touchscreen/ad7879-i2c.c | 67 +-
drivers/input/touchscreen/ad7879-spi.c | 131 +--
drivers/input/touchscreen/ad7879.c | 152 ++--
drivers/input/touchscreen/ad7879.h | 14 +-
drivers/input/touchscreen/ads7846.c | 2 +-
drivers/input/touchscreen/ar1021_i2c.c | 30 +-
drivers/input/touchscreen/eeti_ts.c | 226 ++---
drivers/input/touchscreen/imx6ul_tsc.c | 15 +-
drivers/input/touchscreen/lpc32xx_ts.c | 13 +-
drivers/input/touchscreen/max11801_ts.c | 7 +
drivers/input/touchscreen/melfas_mip4.c | 11 +
drivers/input/touchscreen/silead.c | 13 +
drivers/input/touchscreen/sur40.c | 2 +-
drivers/input/touchscreen/tps6507x-ts.c | 33 +-
drivers/input/touchscreen/tsc2007.h | 101 +++
.../touchscreen/{tsc2007.c => tsc2007_core.c} | 102 +--
drivers/input/touchscreen/tsc2007_iio.c | 140 +++
include/linux/i2c.h | 5 +
include/linux/input/eeti_ts.h | 10 -
include/linux/input/matrix_keypad.h | 3 +
include/linux/mfd/cros_ec_commands.h | 4 +
include/linux/serio.h | 1 +
129 files changed, 7607 insertions(+), 5389 deletions(-)
rename Documentation/devicetree/bindings/input/{ => touchscreen}/ads7846.txt (100%)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ar1021.txt
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
delete mode 100644 Documentation/input/cd32.txt
create mode 100644 Documentation/input/conf.py
rename Documentation/input/{alps.txt => devices/alps.rst} (94%)
rename Documentation/input/{amijoy.txt => devices/amijoy.rst} (60%)
rename Documentation/input/{appletouch.txt => devices/appletouch.rst} (79%)
rename Documentation/input/{atarikbd.txt => devices/atarikbd.rst} (90%)
rename Documentation/input/{bcm5974.txt => devices/bcm5974.rst} (55%)
rename Documentation/input/{cma3000_d0x.txt => devices/cma3000_d0x.rst} (66%)
rename Documentation/input/{cs461x.txt => devices/cs461x.rst} (80%)
rename Documentation/input/{edt-ft5x06.txt => devices/edt-ft5x06.rst} (100%)
rename Documentation/input/{elantech.txt => devices/elantech.rst} (88%)
create mode 100644 Documentation/input/devices/gpio-tilt.rst
create mode 100644 Documentation/input/devices/iforce-protocol.rst
create mode 100644 Documentation/input/devices/index.rst
create mode 100644 Documentation/input/devices/joystick-parport.rst
rename Documentation/input/{ntrig.txt => devices/ntrig.rst} (75%)
rename Documentation/input/{rotary-encoder.txt => devices/rotary-encoder.rst} (59%)
create mode 100644 Documentation/input/devices/sentelic.rst
rename Documentation/input/{walkera0701.txt => devices/walkera0701.rst} (86%)
rename Documentation/input/{xpad.txt => devices/xpad.rst} (73%)
rename Documentation/input/{yealink.txt => devices/yealink.rst} (60%)
rename Documentation/input/{event-codes.txt => event-codes.rst} (96%)
rename Documentation/input/{ff.txt => ff.rst} (62%)
rename Documentation/input/{gamepad.txt => gamepad.rst} (87%)
rename Documentation/input/{gameport-programming.txt => gameport-programming.rst} (85%)
delete mode 100644 Documentation/input/gpio-tilt.txt
delete mode 100644 Documentation/input/iforce-protocol.txt
create mode 100644 Documentation/input/index.rst
rename Documentation/input/{input-programming.txt => input-programming.rst} (69%)
create mode 100644 Documentation/input/input.rst
delete mode 100644 Documentation/input/input.txt
create mode 100644 Documentation/input/input_kapi.rst
create mode 100644 Documentation/input/input_uapi.rst
delete mode 100644 Documentation/input/interactive.fig
create mode 100644 Documentation/input/interactive.svg
create mode 100644 Documentation/input/joydev/index.rst
rename Documentation/input/{joystick-api.txt => joydev/joystick-api.rst} (72%)
create mode 100644 Documentation/input/joydev/joystick.rst
delete mode 100644 Documentation/input/joystick-parport.txt
delete mode 100644 Documentation/input/joystick.txt
rename Documentation/input/{multi-touch-protocol.txt => multi-touch-protocol.rst} (68%)
rename Documentation/input/{notifier.txt => notifier.rst} (90%)
delete mode 100644 Documentation/input/sentelic.txt
delete mode 100644 Documentation/input/shape.fig
create mode 100644 Documentation/input/shape.svg
create mode 100644 Documentation/input/uinput.rst
rename Documentation/input/{userio.txt => userio.rst} (56%)
create mode 100644 drivers/input/mouse/psmouse-smbus.c
create mode 100644 drivers/input/touchscreen/tsc2007.h
rename drivers/input/touchscreen/{tsc2007.c => tsc2007_core.c} (83%)
create mode 100644 drivers/input/touchscreen/tsc2007_iio.c
delete mode 100644 include/linux/input/eeti_ts.h
Thanks.
--
Dmitry
--
Dmitry
^ permalink raw reply [flat|nested] 2+ messages in thread
* [git pull] Input updates for v4.11-rc0
@ 2017-05-13 14:58 Dmitry Torokhov
0 siblings, 0 replies; 2+ messages in thread
From: Dmitry Torokhov @ 2017-05-13 14:58 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel, linux-input
Hi Linus,
Please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git for-linus
to receive updates for the input subsystem. You will get an updated xpad
driver with a few more recognized device IDs, and a new psxpad-spi
driver, allowing connecting Playstation 1 and 2 joypads via SPI bus.
Changelog:
---------
Arnd Bergmann (1):
Input: cros_ec_keyb - remove extraneous 'const'
Benjamin Valentin (3):
Input: xpad - sort supported devices by USB ID
Input: xpad - sync supported devices with xboxdrv
Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer Sabertooth
Tomohiro Yoshidomi (1):
Input: add support for PlayStation 1/2 joypads connected via SPI
Diffstat:
--------
drivers/input/joystick/Kconfig | 21 ++
drivers/input/joystick/Makefile | 1 +
drivers/input/joystick/psxpad-spi.c | 401 ++++++++++++++++++++++++++++++++++
drivers/input/joystick/xpad.c | 27 ++-
drivers/input/keyboard/cros_ec_keyb.c | 2 +-
5 files changed, 445 insertions(+), 7 deletions(-)
create mode 100644 drivers/input/joystick/psxpad-spi.c
Thanks.
--
Dmitry
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-05-13 14:58 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-05-03 18:50 [git pull] Input updates for v4.11-rc0 Dmitry Torokhov
2017-05-13 14:58 Dmitry Torokhov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).