linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jan Kara <jack@suse.cz>
To: Corentin Labbe <clabbe.montjoie@gmail.com>
Cc: Jan Kara <jack@suse.cz>,
	anna.schumaker@netapp.com, hch@lst.de,
	trond.myklebust@primarydata.com, axboe@fb.com,
	linux-nfs@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [BUG] cannot mount nfs, bisected to 0db10944a76ba ("nfs: Convert to separately allocated bdi")
Date: Thu, 4 May 2017 08:59:28 +0200	[thread overview]
Message-ID: <20170504065928.GA31315@quack2.suse.cz> (raw)
In-Reply-To: <20170503171911.GB8192@Red>

On Wed 03-05-17 19:19:11, Corentin Labbe wrote:
> On Wed, May 03, 2017 at 01:44:54PM +0200, Jan Kara wrote:
> > On Tue 02-05-17 19:22:22, Corentin Labbe wrote:
> > > On Tue, May 02, 2017 at 06:27:04PM +0200, Jan Kara wrote:
> > > > Hello,
> > > > 
> > > > On Fri 28-04-17 11:56:24, Corentin Labbe wrote:
> > > > > Since linux next-20170421, mounting nfs give me:
> > > > > [  774.994934] ------------[ cut here ]------------
> > > > > [  774.994975] WARNING: CPU: 1 PID: 10284 at /linux-next/fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x74
> > > > > [  774.994985] sysfs: cannot create duplicate filename '/devices/virtual/bdi/0:32'
> > > > > [  774.994992] Modules linked in: axp20x_usb_power gpio_axp209 nvmem_sunxi_sid sun4i_dma sun4i_ss virt_dma
> > > > > [  774.995047] CPU: 1 PID: 10284 Comm: mount.nfs Not tainted 4.11.0-rc4+ #14
> > > > > [  774.995054] Hardware name: Allwinner sun7i (A20) Family
> > > > > [  774.995085] [<c010f19c>] (unwind_backtrace) from [<c010bc74>] (show_stack+0x10/0x14)
> > > > > [  774.995104] [<c010bc74>] (show_stack) from [<c03c6e24>] (dump_stack+0x78/0x8c)
> > > > > [  774.995121] [<c03c6e24>] (dump_stack) from [<c0122200>] (__warn+0xe8/0x100)
> > > > > [  774.995135] [<c0122200>] (__warn) from [<c0122250>] (warn_slowpath_fmt+0x38/0x48)
> > > > > [  774.995150] [<c0122250>] (warn_slowpath_fmt) from [<c02ac178>] (sysfs_warn_dup+0x64/0x74)
> > > > > [  774.995167] [<c02ac178>] (sysfs_warn_dup) from [<c02ac254>] (sysfs_create_dir_ns+0x84/0x94)
> > > > > [  774.995184] [<c02ac254>] (sysfs_create_dir_ns) from [<c03c8b8c>] (kobject_add_internal+0x9c/0x2ec)
> > > > > [  774.995199] [<c03c8b8c>] (kobject_add_internal) from [<c03c8e24>] (kobject_add+0x48/0x98)
> > > > > [  774.995217] [<c03c8e24>] (kobject_add) from [<c048d75c>] (device_add+0xe4/0x5a0)
> > > > > [  774.995232] [<c048d75c>] (device_add) from [<c048ddb4>] (device_create_groups_vargs+0xac/0xbc)
> > > > > [  774.995247] [<c048ddb4>] (device_create_groups_vargs) from [<c048dde4>] (device_create_vargs+0x20/0x28)
> > > > > [  774.995263] [<c048dde4>] (device_create_vargs) from [<c02075c8>] (bdi_register_va+0x44/0xfc)
> > > > > [  774.995280] [<c02075c8>] (bdi_register_va) from [<c023d378>] (super_setup_bdi_name+0x48/0xa4)
> > > > > [  774.995299] [<c023d378>] (super_setup_bdi_name) from [<c0312ef4>] (nfs_fill_super+0x1a4/0x204)
> > > > > [  774.995315] [<c0312ef4>] (nfs_fill_super) from [<c03133f0>] (nfs_fs_mount_common+0x140/0x1e8)
> > > > > [  774.995333] [<c03133f0>] (nfs_fs_mount_common) from [<c03335cc>] (nfs4_remote_mount+0x50/0x58)
> > > > > [  774.995349] [<c03335cc>] (nfs4_remote_mount) from [<c023ef98>] (mount_fs+0x14/0xa4)
> > > > > [  774.995368] [<c023ef98>] (mount_fs) from [<c025cba0>] (vfs_kern_mount+0x54/0x128)
> > > > > [  774.995385] [<c025cba0>] (vfs_kern_mount) from [<c033352c>] (nfs_do_root_mount+0x80/0xa0)
> > > > > [  774.995400] [<c033352c>] (nfs_do_root_mount) from [<c0333818>] (nfs4_try_mount+0x28/0x3c)
> > > > > [  774.995415] [<c0333818>] (nfs4_try_mount) from [<c0313874>] (nfs_fs_mount+0x2cc/0x8c4)
> > > > > [  774.995430] [<c0313874>] (nfs_fs_mount) from [<c023ef98>] (mount_fs+0x14/0xa4)
> > > > > [  774.995445] [<c023ef98>] (mount_fs) from [<c025cba0>] (vfs_kern_mount+0x54/0x128)
> > > > > [  774.995461] [<c025cba0>] (vfs_kern_mount) from [<c02600f0>] (do_mount+0x158/0xc7c)
> > > > > [  774.995475] [<c02600f0>] (do_mount) from [<c0260f98>] (SyS_mount+0x8c/0xb4)
> > > > > [  774.995491] [<c0260f98>] (SyS_mount) from [<c0107840>] (ret_fast_syscall+0x0/0x3c)
> > > > > [  774.995501] ---[ end trace 0665e451f8864ff0 ]---
> > > > ...
> > > > > The mount command is
> > > > > mount -t nfs -o tcp,hard,intr,async,rsize=4096,wsize=4096 192.168.1.100:/mnt/local_kernel /usr/src/
> > > > > 
> > > > > the mount command failling with: "mount.nfs: Cannot allocate memory"
> > > > 
> > > > I've tried reproducing this (both with NFSv3 and NFSv4) and failed. Also I
> > > > have looked through the code and I fail to see how this could happen. Is
> > > > this the only NFS mount that you have on your system? Didn't also the
> > > > WARN_ON in super_setup_bdi_name() trigger?
> > > > 
> > > > Can you run with the attached debug patch and post full dmesg after the
> > > > failure?
> > > > 
> > > 
> > > Hello
> > > 
> > > I forgot to said that I have 6 nfs mount point.
> > > mount -t nfs -o ro,tcp,hard,intr,async,vers=3 192.168.1.100:/usr/portage /usr/portage/
> > > mount -t nfs -o tcp,hard,intr,async,vers=3 192.168.1.100:/usr/local/portage /usr/local/portage/
> > > mount -t nfs -o tcp,hard,intr,async,vers=3 192.168.1.100:/mnt/tempo/portages/distfiles /usr/portage/distfiles
> > > mount -t nfs -o tcp,hard,intr,async,vers=4 192.168.1.100:/mnt/tempo/portages/cubiedev/packages /usr/portage/packages
> > > mount -t nfs -o tcp,hard,intr,async,vers=4,rsize=4096,wsize=4096 192.168.1.100:/var/tmp/portage/cubie /var/tmp/portage/
> > > mount -t nfs -o tcp,hard,intr,async,rsize=4096,wsize=4096 192.168.1.100:/mnt/tempo/cubie/local_kernel /usr/src/
> > > 
> > > It's always the last which fail, but strangely inverting the two last
> > > made everything ok.
> > 
> > Thanks for more info and the debug data. I still was not able to reproduce
> > the issue but after pondering my head on this for some time I have found a
> > bug in NFS conversion which can possibly cause the behavior you observe.
> > Does the attached patch fix the problem for you?
> > 
> > If it does not, can you also post /proc/mounts and /etc/exports from you
> > NFS server?
> > 
> 
> This patch fix the issue

Thanks for testing! I'll send the fix to Jens, hopefully it will go in
still during this merge window.

								Honza
-- 
Jan Kara <jack@suse.com>
SUSE Labs, CR

      reply	other threads:[~2017-05-04  6:59 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-28  9:56 [BUG] cannot mount nfs, bisected to 0db10944a76ba ("nfs: Convert to separately allocated bdi") Corentin Labbe
2017-04-28 10:09 ` Jan Kara
2017-05-02 16:27 ` Jan Kara
2017-05-02 17:22   ` Corentin Labbe
2017-05-03 11:44     ` Jan Kara
2017-05-03 17:19       ` Corentin Labbe
2017-05-04  6:59         ` Jan Kara [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170504065928.GA31315@quack2.suse.cz \
    --to=jack@suse.cz \
    --cc=anna.schumaker@netapp.com \
    --cc=axboe@fb.com \
    --cc=clabbe.montjoie@gmail.com \
    --cc=hch@lst.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nfs@vger.kernel.org \
    --cc=trond.myklebust@primarydata.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).