linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tvrtko Ursulin <tursulin@ursulin.net>
To: Intel-gfx@lists.freedesktop.org
Cc: tursulin@ursulin.net, Tvrtko Ursulin <tvrtko.ursulin@intel.com>,
	Masahiro Yamada <yamada.masahiro@socionext.com>,
	linux-kernel@vger.kernel.org,
	Joonas Lahtinen <joonas.lahtinen@linux.intel.com>,
	Andy Shevchenko <andy.shevchenko@gmail.com>
Subject: [PATCH 2/4] lib/scatterlist: Avoid potential scatterlist entry overflow
Date: Thu,  4 May 2017 16:54:03 +0100	[thread overview]
Message-ID: <20170504155405.7425-2-tvrtko.ursulin@linux.intel.com> (raw)
In-Reply-To: <20170504155405.7425-1-tvrtko.ursulin@linux.intel.com>

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Since the scatterlist length field is an unsigned int, make
sure that sg_alloc_table_from_pages does not overflow it while
coallescing pages to a single entry.

v2: Drop reference to future use. Use UINT_MAX.
v3: max_segment must be page aligned.
v4: Do not rely on compiler to optimise out the rounddown.
    (Joonas Lahtinen)
v5: Simplified loops and use post-increments rather than
    pre-increments. Use PAGE_MASK and fix comment typo.
    (Andy Shevchenko)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 include/linux/scatterlist.h |  6 ++++++
 lib/scatterlist.c           | 31 ++++++++++++++++++++-----------
 2 files changed, 26 insertions(+), 11 deletions(-)

diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
index c981bee1a3ae..4768eeeb7054 100644
--- a/include/linux/scatterlist.h
+++ b/include/linux/scatterlist.h
@@ -21,6 +21,12 @@ struct scatterlist {
 };
 
 /*
+ * Since the above length field is an unsigned int, below we define the maximum
+ * length in bytes that can be stored in one scatterlist entry.
+ */
+#define SCATTERLIST_MAX_SEGMENT (UINT_MAX & PAGE_MASK)
+
+/*
  * These macros should be used after a dma_map_sg call has been done
  * to get bus addresses of each of the SG entries and their lengths.
  * You should only work with the number of sg entries dma_map_sg
diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index 11f172c383cb..ca4ccd8c80b9 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -394,17 +394,22 @@ int sg_alloc_table_from_pages(struct sg_table *sgt,
 	unsigned int offset, unsigned long size,
 	gfp_t gfp_mask)
 {
-	unsigned int chunks;
-	unsigned int i;
-	unsigned int cur_page;
+	const unsigned int max_segment = SCATTERLIST_MAX_SEGMENT;
+	unsigned int chunks, cur_page, seg_len, i;
 	int ret;
 	struct scatterlist *s;
 
 	/* compute number of contiguous chunks */
 	chunks = 1;
-	for (i = 1; i < n_pages; ++i)
-		if (page_to_pfn(pages[i]) != page_to_pfn(pages[i - 1]) + 1)
-			++chunks;
+	seg_len = 0;
+	for (i = 1; i < n_pages; i++) {
+		seg_len += PAGE_SIZE;
+		if (seg_len >= max_segment ||
+		    page_to_pfn(pages[i]) != page_to_pfn(pages[i - 1]) + 1) {
+			chunks++;
+			seg_len = 0;
+		}
+	}
 
 	ret = sg_alloc_table(sgt, chunks, gfp_mask);
 	if (unlikely(ret))
@@ -413,17 +418,21 @@ int sg_alloc_table_from_pages(struct sg_table *sgt,
 	/* merging chunks and putting them into the scatterlist */
 	cur_page = 0;
 	for_each_sg(sgt->sgl, s, sgt->orig_nents, i) {
-		unsigned long chunk_size;
-		unsigned int j;
+		unsigned int j, chunk_size;
 
 		/* look for the end of the current chunk */
-		for (j = cur_page + 1; j < n_pages; ++j)
-			if (page_to_pfn(pages[j]) !=
+		seg_len = 0;
+		for (j = cur_page + 1; j < n_pages; j++) {
+			seg_len += PAGE_SIZE;
+			if (seg_len >= max_segment ||
+			    page_to_pfn(pages[j]) !=
 			    page_to_pfn(pages[j - 1]) + 1)
 				break;
+		}
 
 		chunk_size = ((j - cur_page) << PAGE_SHIFT) - offset;
-		sg_set_page(s, pages[cur_page], min(size, chunk_size), offset);
+		sg_set_page(s, pages[cur_page],
+			    min_t(unsigned long, size, chunk_size), offset);
 		size -= chunk_size;
 		offset = 0;
 		cur_page = j;
-- 
2.9.3

  reply	other threads:[~2017-05-04 15:55 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-04 15:54 [PATCH 1/4] lib/scatterlist: Fix offset type in sg_alloc_table_from_pages Tvrtko Ursulin
2017-05-04 15:54 ` Tvrtko Ursulin [this message]
2017-05-04 15:54 ` [PATCH 3/4] lib/scatterlist: Introduce and export __sg_alloc_table_from_pages Tvrtko Ursulin
2017-05-04 15:54 ` [PATCH 4/4] drm/i915: Use __sg_alloc_table_from_pages for userptr allocations Tvrtko Ursulin
     [not found] <20170727090504.15812-1-tvrtko.ursulin@linux.intel.com>
2017-07-27  9:05 ` [PATCH 2/4] lib/scatterlist: Avoid potential scatterlist entry overflow Tvrtko Ursulin
  -- strict thread matches above, loose matches on Subject: below --
2017-01-16 14:12 [PATCH 1/4] lib/scatterlist: Fix offset type in sg_alloc_table_from_pages Tvrtko Ursulin
2017-01-16 14:12 ` [PATCH 2/4] lib/scatterlist: Avoid potential scatterlist entry overflow Tvrtko Ursulin
2017-01-11  9:00 [PATCH 1/4] lib/scatterlist: Fix offset type in sg_alloc_table_from_pages Tvrtko Ursulin
2017-01-11  9:00 ` [PATCH 2/4] lib/scatterlist: Avoid potential scatterlist entry overflow Tvrtko Ursulin
2016-11-11  8:50 [PATCH 0/4] Compact userptr object backing store allocation Tvrtko Ursulin
2016-11-11  8:50 ` [PATCH 2/4] lib/scatterlist: Avoid potential scatterlist entry overflow Tvrtko Ursulin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170504155405.7425-2-tvrtko.ursulin@linux.intel.com \
    --to=tursulin@ursulin.net \
    --cc=Intel-gfx@lists.freedesktop.org \
    --cc=andy.shevchenko@gmail.com \
    --cc=joonas.lahtinen@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tvrtko.ursulin@intel.com \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).