linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
To: Sebastian Reichel <sre@kernel.org>,
	Till Harbaum <till@harbaum.org>, Wolfram Sang <wsa@the-dreams.de>
Cc: Greg KH <gregkh@linuxfoundation.org>,
	linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
	Sebastian Reichel <sebastian.reichel@collabora.co.uk>,
	stable@vger.kernel.org
Subject: [PATCHv2] i2c: i2c-tiny-usb: fix buffer not being DMA capable
Date: Fri,  5 May 2017 11:06:50 +0200	[thread overview]
Message-ID: <20170505090650.28412-1-sebastian.reichel@collabora.co.uk> (raw)

Since v4.9 i2c-tiny-usb generates the below call trace
and longer works, since it can't communicate with the
USB device. The reason is, that since v4.9 the USB
stack checks, that the buffer it should transfer is DMA
capable. This was a requirement since v2.2 days, but it
usually worked nevertheless.

[   17.504959] ------------[ cut here ]------------
[   17.505488] WARNING: CPU: 0 PID: 93 at drivers/usb/core/hcd.c:1587 usb_hcd_map_urb_for_dma+0x37c/0x570
[   17.506545] transfer buffer not dma capable
[   17.507022] Modules linked in:
[   17.507370] CPU: 0 PID: 93 Comm: i2cdetect Not tainted 4.11.0-rc8+ #10
[   17.508103] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[   17.509039] Call Trace:
[   17.509320]  ? dump_stack+0x5c/0x78
[   17.509714]  ? __warn+0xbe/0xe0
[   17.510073]  ? warn_slowpath_fmt+0x5a/0x80
[   17.510532]  ? nommu_map_sg+0xb0/0xb0
[   17.510949]  ? usb_hcd_map_urb_for_dma+0x37c/0x570
[   17.511482]  ? usb_hcd_submit_urb+0x336/0xab0
[   17.511976]  ? wait_for_completion_timeout+0x12f/0x1a0
[   17.512549]  ? wait_for_completion_timeout+0x65/0x1a0
[   17.513125]  ? usb_start_wait_urb+0x65/0x160
[   17.513604]  ? usb_control_msg+0xdc/0x130
[   17.514061]  ? usb_xfer+0xa4/0x2a0
[   17.514445]  ? __i2c_transfer+0x108/0x3c0
[   17.514899]  ? i2c_transfer+0x57/0xb0
[   17.515310]  ? i2c_smbus_xfer_emulated+0x12f/0x590
[   17.515851]  ? _raw_spin_unlock_irqrestore+0x11/0x20
[   17.516408]  ? i2c_smbus_xfer+0x125/0x330
[   17.516876]  ? i2c_smbus_xfer+0x125/0x330
[   17.517329]  ? i2cdev_ioctl_smbus+0x1c1/0x2b0
[   17.517824]  ? i2cdev_ioctl+0x75/0x1c0
[   17.518248]  ? do_vfs_ioctl+0x9f/0x600
[   17.518671]  ? vfs_write+0x144/0x190
[   17.519078]  ? SyS_ioctl+0x74/0x80
[   17.519463]  ? entry_SYSCALL_64_fastpath+0x1e/0xad
[   17.519959] ---[ end trace d047c04982f5ac50 ]---

Cc: <stable@vger.kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
---
Changes since PATCHv1:
 - update patch description, drop # v4.9+ from stable cc
 - add missing checks for kmemdup/kmalloc
---
 drivers/i2c/busses/i2c-tiny-usb.c | 25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c
index 0ed77eeff31e..a2e3dd715380 100644
--- a/drivers/i2c/busses/i2c-tiny-usb.c
+++ b/drivers/i2c/busses/i2c-tiny-usb.c
@@ -178,22 +178,39 @@ static int usb_read(struct i2c_adapter *adapter, int cmd,
 		    int value, int index, void *data, int len)
 {
 	struct i2c_tiny_usb *dev = (struct i2c_tiny_usb *)adapter->algo_data;
+	void *dmadata = kmalloc(len, GFP_KERNEL);
+	int ret;
+
+	if (!dmadata)
+		return -ENOMEM;
 
 	/* do control transfer */
-	return usb_control_msg(dev->usb_dev, usb_rcvctrlpipe(dev->usb_dev, 0),
+	ret = usb_control_msg(dev->usb_dev, usb_rcvctrlpipe(dev->usb_dev, 0),
 			       cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE |
-			       USB_DIR_IN, value, index, data, len, 2000);
+			       USB_DIR_IN, value, index, dmadata, len, 2000);
+
+	memcpy(data, dmadata, len);
+	kfree(dmadata);
+	return ret;
 }
 
 static int usb_write(struct i2c_adapter *adapter, int cmd,
 		     int value, int index, void *data, int len)
 {
 	struct i2c_tiny_usb *dev = (struct i2c_tiny_usb *)adapter->algo_data;
+	void *dmadata = kmemdup(data, len, GFP_KERNEL);
+	int ret;
+
+	if (!dmadata)
+		return -ENOMEM;
 
 	/* do control transfer */
-	return usb_control_msg(dev->usb_dev, usb_sndctrlpipe(dev->usb_dev, 0),
+	ret = usb_control_msg(dev->usb_dev, usb_sndctrlpipe(dev->usb_dev, 0),
 			       cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
-			       value, index, data, len, 2000);
+			       value, index, dmadata, len, 2000);
+
+	kfree(dmadata);
+	return ret;
 }
 
 static void i2c_tiny_usb_free(struct i2c_tiny_usb *dev)
-- 
2.11.0

             reply	other threads:[~2017-05-05  9:07 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-05  9:06 Sebastian Reichel [this message]
2017-05-05 17:53 ` [PATCHv2] i2c: i2c-tiny-usb: fix buffer not being DMA capable Greg KH
2017-05-20 20:01   ` Till Harbaum
2017-05-20 16:09 ` Sebastian Reichel
2017-05-20 20:14   ` Wolfram Sang
2017-05-22  8:35 ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170505090650.28412-1-sebastian.reichel@collabora.co.uk \
    --to=sebastian.reichel@collabora.co.uk \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sre@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=till@harbaum.org \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).