From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753121AbdEESWf (ORCPT ); Fri, 5 May 2017 14:22:35 -0400 Received: from mga03.intel.com ([134.134.136.65]:12857 "EHLO mga03.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751388AbdEESRy (ORCPT ); Fri, 5 May 2017 14:17:54 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.38,293,1491289200"; d="scan'208";a="96140829" From: Ricardo Neri To: Ingo Molnar , Thomas Gleixner , "H. Peter Anvin" , Andy Lutomirski , Borislav Petkov Cc: Peter Zijlstra , Andrew Morton , Brian Gerst , Chris Metcalf , Dave Hansen , Paolo Bonzini , Liang Z Li , Masami Hiramatsu , Huang Rui , Jiri Slaby , Jonathan Corbet , "Michael S. Tsirkin" , Paul Gortmaker , Vlastimil Babka , Chen Yucong , Alexandre Julliard , Stas Sergeev , Fenghua Yu , "Ravi V. Shankar" , Shuah Khan , linux-kernel@vger.kernel.org, x86@kernel.org, linux-msdos@vger.kernel.org, wine-devel@winehq.org, Ricardo Neri , Adam Buchbinder , Colin Ian King , Lorenzo Stoakes , Qiaowei Ren , Arnaldo Carvalho de Melo , Adrian Hunter , Kees Cook , Thomas Garnier , Dmitry Vyukov Subject: [PATCH v7 18/26] x86/insn-eval: Add support to resolve 16-bit addressing encodings Date: Fri, 5 May 2017 11:17:16 -0700 Message-Id: <20170505181724.55000-19-ricardo.neri-calderon@linux.intel.com> X-Mailer: git-send-email 2.9.3 In-Reply-To: <20170505181724.55000-1-ricardo.neri-calderon@linux.intel.com> References: <20170505181724.55000-1-ricardo.neri-calderon@linux.intel.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Tasks running in virtual-8086 mode or in protected mode with code segment descriptors that specify 16-bit default address sizes via the D bit will use 16-bit addressing form encodings as described in the Intel 64 and IA-32 Architecture Software Developer's Manual Volume 2A Section 2.1.5. 16-bit addressing encodings differ in several ways from the 32-bit/64-bit addressing form encodings: ModRM.rm points to different registers and, in some cases, effective addresses are indicated by the addition of the value of two registers. Also, there is no support for SIB bytes. Thus, a separate function is needed to parse this form of addressing. A couple of functions are introduced. get_reg_offset_16() obtains the offset from the base of pt_regs of the registers indicated by the ModRM byte of the address encoding. get_addr_ref_16() computes the linear address indicated by the instructions using the value of the registers given by ModRM as well as the base address of the segment. Cc: Dave Hansen Cc: Adam Buchbinder Cc: Colin Ian King Cc: Lorenzo Stoakes Cc: Qiaowei Ren Cc: Arnaldo Carvalho de Melo Cc: Masami Hiramatsu Cc: Adrian Hunter Cc: Kees Cook Cc: Thomas Garnier Cc: Peter Zijlstra Cc: Borislav Petkov Cc: Dmitry Vyukov Cc: Ravi V. Shankar Cc: x86@kernel.org Signed-off-by: Ricardo Neri --- arch/x86/lib/insn-eval.c | 155 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 155 insertions(+) diff --git a/arch/x86/lib/insn-eval.c b/arch/x86/lib/insn-eval.c index 9822061..928a662 100644 --- a/arch/x86/lib/insn-eval.c +++ b/arch/x86/lib/insn-eval.c @@ -431,6 +431,73 @@ static int get_reg_offset(struct insn *insn, struct pt_regs *regs, } /** + * get_reg_offset_16 - Obtain offset of register indicated by instruction + * @insn: Instruction structure containing ModRM and SiB bytes + * @regs: Structure with register values as seen when entering kernel mode + * @offs1: Offset of the first operand register + * @offs2: Offset of the second opeand register, if applicable. + * + * Obtain the offset, in pt_regs, of the registers indicated by the ModRM byte + * within insn. This function is to be used with 16-bit address encodings. The + * offs1 and offs2 will be written with the offset of the two registers + * indicated by the instruction. In cases where any of the registers is not + * referenced by the instruction, the value will be set to -EDOM. + * + * Return: 0 on success, -EINVAL on failure. + */ +static int get_reg_offset_16(struct insn *insn, struct pt_regs *regs, + int *offs1, int *offs2) +{ + /* 16-bit addressing can use one or two registers */ + static const int regoff1[] = { + offsetof(struct pt_regs, bx), + offsetof(struct pt_regs, bx), + offsetof(struct pt_regs, bp), + offsetof(struct pt_regs, bp), + offsetof(struct pt_regs, si), + offsetof(struct pt_regs, di), + offsetof(struct pt_regs, bp), + offsetof(struct pt_regs, bx), + }; + + static const int regoff2[] = { + offsetof(struct pt_regs, si), + offsetof(struct pt_regs, di), + offsetof(struct pt_regs, si), + offsetof(struct pt_regs, di), + -EDOM, + -EDOM, + -EDOM, + -EDOM, + }; + + if (!offs1 || !offs2) + return -EINVAL; + + /* operand is a register, use the generic function */ + if (X86_MODRM_MOD(insn->modrm.value) == 3) { + *offs1 = insn_get_modrm_rm_off(insn, regs); + *offs2 = -EDOM; + return 0; + } + + *offs1 = regoff1[X86_MODRM_RM(insn->modrm.value)]; + *offs2 = regoff2[X86_MODRM_RM(insn->modrm.value)]; + + /* + * If no displacement is indicated in the mod part of the ModRM byte, + * (mod part is 0) and the r/m part of the same byte is 6, no register + * is used caculate the operand address. An r/m part of 6 means that + * the second register offset is already invalid. + */ + if ((X86_MODRM_MOD(insn->modrm.value) == 0) && + (X86_MODRM_RM(insn->modrm.value) == 6)) + *offs1 = -EDOM; + + return 0; +} + +/** * get_desc() - Obtain address of segment descriptor * @sel: Segment selector * @@ -689,6 +756,94 @@ int insn_get_modrm_rm_off(struct insn *insn, struct pt_regs *regs) } /** + * get_addr_ref_16() - Obtain the 16-bit address referred by instruction + * @insn: Instruction structure containing ModRM byte and displacement + * @regs: Structure with register values as seen when entering kernel mode + * + * This function is to be used with 16-bit address encodings. Obtain the memory + * address referred by the instruction's ModRM bytes and displacement. Also, the + * segment used as base is determined by either any segment override prefixes in + * insn or the default segment of the registers involved in the address + * computation. In protected mode, segment limits are enforced. + * + * Return: linear address referenced by instruction and registers on success. + * -1L on failure. + */ +static void __user *get_addr_ref_16(struct insn *insn, struct pt_regs *regs) +{ + unsigned long linear_addr, seg_base_addr, seg_limit; + short eff_addr, addr1 = 0, addr2 = 0; + int addr_offset1, addr_offset2; + int ret; + + insn_get_modrm(insn); + insn_get_displacement(insn); + + /* + * If operand is a register, the layout is the same as in + * 32-bit and 64-bit addressing. + */ + if (X86_MODRM_MOD(insn->modrm.value) == 3) { + addr_offset1 = get_reg_offset(insn, regs, REG_TYPE_RM); + if (addr_offset1 < 0) + goto out_err; + eff_addr = regs_get_register(regs, addr_offset1); + seg_base_addr = insn_get_seg_base(regs, insn, addr_offset1); + if (seg_base_addr == -1L) + goto out_err; + seg_limit = get_seg_limit(regs, insn, addr_offset1); + } else { + ret = get_reg_offset_16(insn, regs, &addr_offset1, + &addr_offset2); + if (ret < 0) + goto out_err; + /* + * Don't fail on invalid offset values. They might be invalid + * because they cannot be used for this particular value of + * the ModRM. Instead, use them in the computation only if + * they contain a valid value. + */ + if (addr_offset1 != -EDOM) + addr1 = 0xffff & regs_get_register(regs, addr_offset1); + if (addr_offset2 != -EDOM) + addr2 = 0xffff & regs_get_register(regs, addr_offset2); + eff_addr = addr1 + addr2; + /* + * The first register is in the operand implies the SS or DS + * segment selectors, the second register in the operand can + * only imply DS. Thus, use the first register to obtain + * the segment selector. + */ + seg_base_addr = insn_get_seg_base(regs, insn, addr_offset1); + if (seg_base_addr == -1L) + goto out_err; + seg_limit = get_seg_limit(regs, insn, addr_offset1); + + eff_addr += (insn->displacement.value & 0xffff); + } + + linear_addr = (unsigned long)(eff_addr & 0xffff); + + /* + * Make sure the effective address is within the limits of the + * segment. In long mode, the limit is -1L. Thus, the second part + * of the check always succeeds. + */ + if (linear_addr > seg_limit) + goto out_err; + + linear_addr += seg_base_addr; + + /* Limit linear address to 20 bits */ + if (v8086_mode(regs)) + linear_addr &= 0xfffff; + + return (void __user *)linear_addr; +out_err: + return (void __user *)-1; +} + +/** * _to_signed_long() - Cast an unsigned long into signed long * @val A 32-bit or 64-bit unsigned long * @long_bytes The number of bytes used to represent a long number -- 2.9.3