From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To: olof@lixom.net, bleung@chromium.org, linux-kernel@vger.kernel.org
Cc: lee.jones@linaro.org, Eric Caruso <ejcaruso@chromium.org>,
Guenter Roeck <groeck@chromium.org>
Subject: [PATCH RESEND 10/13] platform/chrome: cros_ec_lightbar - Add lightbar program feature to sysfs
Date: Tue, 16 May 2017 18:13:16 +0200 [thread overview]
Message-ID: <20170516161319.13257-11-enric.balletbo@collabora.com> (raw)
In-Reply-To: <20170516161319.13257-1-enric.balletbo@collabora.com>
From: Eric Caruso <ejcaruso@chromium.org>
Add a program feature so we can upload and run programs for lightbar
sequences. We should be able to use this to shift sequences out of the
EC and save space there.
$ cat <suitable program bin> > /sys/devices/.../cros_ec/program
$ echo program > /sys/devices/.../cros_ec/sequence
Signed-off-by: Eric Caruso <ejcaruso@chromium.org>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
drivers/platform/chrome/cros_ec_lightbar.c | 69 +++++++++++++++++++++++++++++-
include/linux/mfd/cros_ec_commands.h | 12 +++++-
2 files changed, 79 insertions(+), 2 deletions(-)
diff --git a/drivers/platform/chrome/cros_ec_lightbar.c b/drivers/platform/chrome/cros_ec_lightbar.c
index 8df3d44..2667505 100644
--- a/drivers/platform/chrome/cros_ec_lightbar.c
+++ b/drivers/platform/chrome/cros_ec_lightbar.c
@@ -295,7 +295,8 @@ static ssize_t led_rgb_store(struct device *dev, struct device_attribute *attr,
static char const *seqname[] = {
"ERROR", "S5", "S3", "S0", "S5S3", "S3S0",
- "S0S3", "S3S5", "STOP", "RUN", "PULSE", "TEST", "KONAMI",
+ "S0S3", "S3S5", "STOP", "RUN", "KONAMI",
+ "TAP", "PROGRAM",
};
static ssize_t sequence_show(struct device *dev,
@@ -390,6 +391,69 @@ static ssize_t sequence_store(struct device *dev, struct device_attribute *attr,
return ret;
}
+static ssize_t program_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int extra_bytes, max_size, ret;
+ struct ec_params_lightbar *param;
+ struct cros_ec_command *msg;
+ struct cros_ec_dev *ec = container_of(dev, struct cros_ec_dev,
+ class_dev);
+
+ /*
+ * We might need to reject the program for size reasons. The EC
+ * enforces a maximum program size, but we also don't want to try
+ * and send a program that is too big for the protocol. In order
+ * to ensure the latter, we also need to ensure we have extra bytes
+ * to represent the rest of the packet.
+ */
+ extra_bytes = sizeof(*param) - sizeof(param->set_program.data);
+ max_size = min(EC_LB_PROG_LEN, ec->ec_dev->max_request - extra_bytes);
+ if (count > max_size) {
+ dev_err(dev, "Program is %u bytes, too long to send (max: %u)",
+ (unsigned int)count, max_size);
+
+ return -EINVAL;
+ }
+
+ msg = alloc_lightbar_cmd_msg(ec);
+ if (!msg)
+ return -ENOMEM;
+
+ ret = lb_throttle();
+ if (ret)
+ goto exit;
+
+ dev_info(dev, "Copying %zu byte program to EC", count);
+
+ param = (struct ec_params_lightbar *)msg->data;
+ param->cmd = LIGHTBAR_CMD_SET_PROGRAM;
+
+ param->set_program.size = count;
+ memcpy(param->set_program.data, buf, count);
+
+ /*
+ * We need to set the message size manually or else it will use
+ * EC_LB_PROG_LEN. This might be too long, and the program
+ * is unlikely to use all of the space.
+ */
+ msg->outsize = count + extra_bytes;
+
+ ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
+ if (ret < 0)
+ goto exit;
+ if (msg->result != EC_RES_SUCCESS) {
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ ret = count;
+exit:
+ kfree(msg);
+
+ return ret;
+}
+
/* Module initialization */
static DEVICE_ATTR_RW(interval_msec);
@@ -397,12 +461,15 @@ static DEVICE_ATTR_RO(version);
static DEVICE_ATTR_WO(brightness);
static DEVICE_ATTR_WO(led_rgb);
static DEVICE_ATTR_RW(sequence);
+static DEVICE_ATTR_WO(program);
+
static struct attribute *__lb_cmds_attrs[] = {
&dev_attr_interval_msec.attr,
&dev_attr_version.attr,
&dev_attr_brightness.attr,
&dev_attr_led_rgb.attr,
&dev_attr_sequence.attr,
+ &dev_attr_program.attr,
NULL,
};
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 1b19e424..dbea580 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1162,6 +1162,13 @@ struct lightbar_params_v1 {
struct rgb_s color[8]; /* 0-3 are Google colors */
} __packed;
+/* Lightbar program */
+#define EC_LB_PROG_LEN 192
+struct lightbar_program {
+ uint8_t size;
+ uint8_t data[EC_LB_PROG_LEN];
+};
+
struct ec_params_lightbar {
uint8_t cmd; /* Command (see enum lightbar_command) */
union {
@@ -1188,6 +1195,7 @@ struct ec_params_lightbar {
struct lightbar_params_v0 set_params_v0;
struct lightbar_params_v1 set_params_v1;
+ struct lightbar_program set_program;
};
} __packed;
@@ -1220,7 +1228,8 @@ struct ec_response_lightbar {
struct {
/* no return params */
} off, on, init, set_brightness, seq, reg, set_rgb,
- demo, set_params_v0, set_params_v1;
+ demo, set_params_v0, set_params_v1,
+ set_program;
};
} __packed;
@@ -1244,6 +1253,7 @@ enum lightbar_command {
LIGHTBAR_CMD_GET_DEMO = 15,
LIGHTBAR_CMD_GET_PARAMS_V1 = 16,
LIGHTBAR_CMD_SET_PARAMS_V1 = 17,
+ LIGHTBAR_CMD_SET_PROGRAM = 18,
LIGHTBAR_NUM_CMDS
};
--
2.9.3
next prev parent reply other threads:[~2017-05-16 16:13 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-16 16:13 [PATCH RESEND 00/13] platform/chrome: Add console debugfs, lpc and lightbar programming support Enric Balletbo i Serra
2017-05-16 16:13 ` [PATCH RESEND 01/13] mfd: cros_ec: Add helper for event notifier Enric Balletbo i Serra
2017-06-16 20:45 ` Benson Leung
2017-05-16 16:13 ` [PATCH RESEND 02/13] mfd: cros_ec: Add EC console read structures definitions Enric Balletbo i Serra
2017-06-16 20:47 ` Benson Leung
2017-05-16 16:13 ` [PATCH RESEND 03/13] mfd: cros_ec: add debugfs, console log file Enric Balletbo i Serra
2017-06-16 19:42 ` Benson Leung
2017-05-16 16:13 ` [PATCH RESEND 04/13] mfd: cros_ec: Add support for dumping panic information Enric Balletbo i Serra
2017-06-22 23:38 ` Benson Leung
2017-05-16 16:13 ` [PATCH RESEND 05/13] platform/chrome: cros_ec_lpc: Add R/W helpers to LPC protocol variants Enric Balletbo i Serra
2017-05-22 11:09 ` Lee Jones
2017-06-22 19:02 ` Benson Leung
2017-05-16 16:13 ` [PATCH RESEND 06/13] platform/chrome: cros_ec_lpc: Add support for mec1322 EC Enric Balletbo i Serra
2017-05-22 11:09 ` Lee Jones
2017-06-22 19:01 ` Benson Leung
2017-05-16 16:13 ` [PATCH RESEND 07/13] platform/chrome: cros_ec_lpc: Add support for GOOG004 ACPI device Enric Balletbo i Serra
2017-06-22 19:39 ` Benson Leung
2017-05-16 16:13 ` [PATCH RESEND 08/13] platform/chrome: cros_ec_lpc: Add power management ops Enric Balletbo i Serra
2017-06-22 19:46 ` Benson Leung
2017-05-16 16:13 ` [PATCH RESEND 09/13] platform/chrome: cros_ec_lpc: Add MKBP events support over ACPI Enric Balletbo i Serra
2017-06-22 19:35 ` Benson Leung
2017-06-23 7:35 ` Thierry Escande
2017-06-23 17:54 ` Benson Leung
2017-05-16 16:13 ` Enric Balletbo i Serra [this message]
2017-06-22 23:43 ` [PATCH RESEND 10/13] platform/chrome: cros_ec_lightbar - Add lightbar program feature to sysfs Benson Leung
2017-05-16 16:13 ` [PATCH RESEND 11/13] platform/chrome: cros_ec_lightbar - Control of suspend/resume lightbar sequence Enric Balletbo i Serra
2017-06-23 22:08 ` Benson Leung
2017-05-16 16:13 ` [PATCH RESEND 12/13] platform/chrome: cros_ec_lightbar - Add userspace lightbar control bit to EC Enric Balletbo i Serra
2017-06-23 22:12 ` Benson Leung
2017-05-16 16:13 ` [PATCH RESEND 13/13] platform/chrome: cros_ec_lightbar - Avoid I2C xfer to EC during suspend Enric Balletbo i Serra
2017-06-23 22:22 ` Benson Leung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170516161319.13257-11-enric.balletbo@collabora.com \
--to=enric.balletbo@collabora.com \
--cc=bleung@chromium.org \
--cc=ejcaruso@chromium.org \
--cc=groeck@chromium.org \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olof@lixom.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).