From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: devel@linuxdriverproject.org, x86@kernel.org
Cc: linux-kernel@vger.kernel.org,
"K. Y. Srinivasan" <kys@microsoft.com>,
Haiyang Zhang <haiyangz@microsoft.com>,
Stephen Hemminger <sthemmin@microsoft.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
Steven Rostedt <rostedt@goodmis.org>,
Jork Loeser <Jork.Loeser@microsoft.com>,
Simon Xiao <sixiao@microsoft.com>,
Andy Lutomirski <luto@kernel.org>
Subject: [PATCH v4 10/10] tracing/hyper-v: trace hyperv_mmu_flush_tlb_others()
Date: Wed, 24 May 2017 14:04:05 +0200 [thread overview]
Message-ID: <20170524120405.19079-11-vkuznets@redhat.com> (raw)
In-Reply-To: <20170524120405.19079-1-vkuznets@redhat.com>
Add Hyper-V tracing subsystem and trace hyperv_mmu_flush_tlb_others().
Tracing is done the same way we do xen_mmu_flush_tlb_others().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Tested-by: Simon Xiao <sixiao@microsoft.com>
Tested-by: Srikanth Myakam <v-srm@microsoft.com>
---
MAINTAINERS | 1 +
arch/x86/hyperv/mmu.c | 8 ++++++++
arch/x86/include/asm/trace/hyperv.h | 34 ++++++++++++++++++++++++++++++++++
3 files changed, 43 insertions(+)
create mode 100644 arch/x86/include/asm/trace/hyperv.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 9e98464..045e10a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6168,6 +6168,7 @@ M: Stephen Hemminger <sthemmin@microsoft.com>
L: devel@linuxdriverproject.org
S: Maintained
F: arch/x86/include/asm/mshyperv.h
+F: arch/x86/include/asm/trace/hyperv.h
F: arch/x86/include/uapi/asm/hyperv.h
F: arch/x86/kernel/cpu/mshyperv.c
F: arch/x86/hyperv
diff --git a/arch/x86/hyperv/mmu.c b/arch/x86/hyperv/mmu.c
index c9cecb3..f6b5211 100644
--- a/arch/x86/hyperv/mmu.c
+++ b/arch/x86/hyperv/mmu.c
@@ -6,6 +6,10 @@
#include <asm/tlbflush.h>
#include <asm/msr.h>
#include <asm/fpu/api.h>
+#include <asm/trace/hyperv.h>
+
+#define CREATE_TRACE_POINTS
+DEFINE_TRACE(hyperv_mmu_flush_tlb_others);
/* HvFlushVirtualAddressSpace, HvFlushVirtualAddressList hypercalls */
struct hv_flush_pcpu {
@@ -75,6 +79,8 @@ static void hyperv_flush_tlb_others(const struct cpumask *cpus,
u64 status = -1ULL;
int cpu, vcpu, gva_n, max_gvas;
+ trace_hyperv_mmu_flush_tlb_others(cpus, mm, start, end);
+
if (!pcpu_flush || !hv_hypercall_pg)
goto do_native;
@@ -161,6 +167,8 @@ static void hyperv_flush_tlb_others_ex(const struct cpumask *cpus,
u64 status = -1ULL;
int nr_bank = 0, max_gvas, gva_n;
+ trace_hyperv_mmu_flush_tlb_others(cpus, mm, start, end);
+
if (!pcpu_flush_ex || !hv_hypercall_pg)
goto do_native;
diff --git a/arch/x86/include/asm/trace/hyperv.h b/arch/x86/include/asm/trace/hyperv.h
new file mode 100644
index 0000000..e46a351
--- /dev/null
+++ b/arch/x86/include/asm/trace/hyperv.h
@@ -0,0 +1,34 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM hyperv
+
+#if !defined(_TRACE_HYPERV_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_HYPERV_H
+
+#include <linux/tracepoint.h>
+
+#if IS_ENABLED(CONFIG_HYPERV)
+
+TRACE_EVENT(hyperv_mmu_flush_tlb_others,
+ TP_PROTO(const struct cpumask *cpus, struct mm_struct *mm,
+ unsigned long addr, unsigned long end),
+ TP_ARGS(cpus, mm, addr, end),
+ TP_STRUCT__entry(
+ __field(unsigned int, ncpus)
+ __field(struct mm_struct *, mm)
+ __field(unsigned long, addr)
+ __field(unsigned long, end)
+ ),
+ TP_fast_assign(__entry->ncpus = cpumask_weight(cpus);
+ __entry->mm = mm;
+ __entry->addr = addr,
+ __entry->end = end),
+ TP_printk("ncpus %d mm %p addr %lx, end %lx",
+ __entry->ncpus, __entry->mm, __entry->addr, __entry->end)
+ );
+
+#endif /* CONFIG_HYPERV */
+
+#endif /* _TRACE_HYPERV_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
--
2.9.4
next prev parent reply other threads:[~2017-05-24 12:05 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-24 12:03 [PATCH v4 00/10] Hyper-V: praravirtualized remote TLB flushing and hypercall improvements Vitaly Kuznetsov
2017-05-24 12:03 ` [PATCH v4 01/10] x86/hyper-v: include hyperv/ only when CONFIG_HYPERV is set Vitaly Kuznetsov
2017-05-24 12:03 ` [PATCH v4 02/10] x86/hyper-v: stash the max number of virtual/logical processor Vitaly Kuznetsov
2017-05-27 17:43 ` Andy Shevchenko
2017-06-05 15:24 ` Steven Rostedt
2017-06-05 15:30 ` Stephen Hemminger
2017-05-24 12:03 ` [PATCH v4 03/10] x86/hyper-v: make hv_do_hypercall() inline Vitaly Kuznetsov
2017-05-27 17:46 ` Andy Shevchenko
2017-05-24 12:03 ` [PATCH v4 04/10] x86/hyper-v: fast hypercall implementation Vitaly Kuznetsov
2017-05-27 17:49 ` Andy Shevchenko
2017-05-24 12:04 ` [PATCH v4 05/10] hyper-v: use fast hypercall for HVCALL_SIGNAL_EVENT Vitaly Kuznetsov
2017-05-27 17:50 ` Andy Shevchenko
2017-05-24 12:04 ` [PATCH v4 06/10] x86/hyper-v: implement rep hypercalls Vitaly Kuznetsov
2017-05-24 12:04 ` [PATCH v4 07/10] hyper-v: globalize vp_index Vitaly Kuznetsov
2017-05-24 12:04 ` [PATCH v4 08/10] x86/hyper-v: use hypercall for remote TLB flush Vitaly Kuznetsov
2017-05-24 12:04 ` [PATCH v4 09/10] x86/hyper-v: support extended CPU ranges for TLB flush hypercalls Vitaly Kuznetsov
2017-05-27 18:13 ` Andy Shevchenko
2017-05-24 12:04 ` Vitaly Kuznetsov [this message]
2017-06-05 15:50 ` [PATCH v4 10/10] tracing/hyper-v: trace hyperv_mmu_flush_tlb_others() Steven Rostedt
2017-06-05 16:19 ` Vitaly Kuznetsov
2017-06-07 13:52 ` Steven Rostedt
2017-06-07 14:03 ` Vitaly Kuznetsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170524120405.19079-11-vkuznets@redhat.com \
--to=vkuznets@redhat.com \
--cc=Jork.Loeser@microsoft.com \
--cc=devel@linuxdriverproject.org \
--cc=haiyangz@microsoft.com \
--cc=hpa@zytor.com \
--cc=kys@microsoft.com \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=mingo@redhat.com \
--cc=rostedt@goodmis.org \
--cc=sixiao@microsoft.com \
--cc=sthemmin@microsoft.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).