linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-leds@vger.kernel.org, linux-input@vger.kernel.org
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Lee Jones <lee.jones@linaro.org>,
	Daniel Thompson <daniel.thompson@linaro.org>,
	Jingoo Han <jingoohan1@gmail.com>,
	Richard Purdie <rpurdie@rpsys.net>,
	Jacek Anaszewski <jacek.anaszewski@gmail.com>,
	Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Russell King <linux@armlinux.org.uk>,
	Tony Lindgren <tony@atomide.com>,
	javier@dowhile0.org
Subject: [PATCH 1/4] dt-bindings: tps65217: Update binding documentation.
Date: Wed,  7 Jun 2017 12:32:39 +0200	[thread overview]
Message-ID: <20170607103242.16008-1-enric.balletbo@collabora.com> (raw)

This patch adds a new binding documentation for the TPS65217 MFD and
updates the documentation for all the sub-devices in accordance to get
each individual sub-driver functioning correctly.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
 .../bindings/input/tps65218-pwrbutton.txt          |   2 +-
 .../bindings/leds/backlight/tps65217-backlight.txt |  24 ++---
 Documentation/devicetree/bindings/mfd/tps65217.txt | 100 +++++++++++++++++++++
 .../devicetree/bindings/regulator/tps65217.txt     |   8 +-
 4 files changed, 119 insertions(+), 15 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/tps65217.txt

diff --git a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
index 8682ab6..603a3f0 100644
--- a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
+++ b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
@@ -1,7 +1,7 @@
 Texas Instruments TPS65217 and TPS65218 power button
 
 This module is part of the TPS65217/TPS65218. For more details about the whole
-TPS65217 chip see Documentation/devicetree/bindings/regulator/tps65217.txt.
+TPS65217 chip see Documentation/devicetree/bindings/mfd/tps65217.txt.
 
 This driver provides a simple power button event via an Interrupt.
 
diff --git a/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt
index 5fb9279..a1bc465 100644
--- a/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt
+++ b/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt
@@ -1,11 +1,13 @@
-TPS65217 family of regulators
+Texas Instruments TPS65217 backlight regulator
+
+This module is part of the TPS65217. For more details about the whole
+TPS65217 chip see Documentation/devicetree/bindings/mfd/tps65217.txt.
 
 The TPS65217 chip contains a boost converter and current sinks which can be
 used to drive LEDs for use as backlights.
 
 Required properties:
-- compatible: "ti,tps65217"
-- reg: I2C slave address
+- compatible: "ti,tps65217-bl"
 - backlight: node for specifying WLED1 and WLED2 lines in TPS65217
 - isel: selection bit, valid values: 1 for ISEL1 (low-level) and 2 for ISEL2 (high-level)
 - fdim: PWM dimming frequency, valid values: 100, 200, 500, 1000
@@ -15,13 +17,13 @@ Each regulator is defined using the standard binding for regulators.
 
 Example:
 
-	tps: tps@24 {
-		reg = <0x24>;
-		compatible = "ti,tps65217";
-		backlight {
-			isel = <1>;  /* 1 - ISET1, 2 ISET2 */
-			fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
-			default-brightness = <50>;
-		};
+&tps {
+	backlight {
+		compatible = "ti,tps65217-bl";
+		status = "okay";
+		isel = <1>;  /* 1 - ISET1, 2 ISET2 */
+		fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
+		default-brightness = <50>;
 	};
+};
 
diff --git a/Documentation/devicetree/bindings/mfd/tps65217.txt b/Documentation/devicetree/bindings/mfd/tps65217.txt
new file mode 100644
index 0000000..40c84ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps65217.txt
@@ -0,0 +1,100 @@
+Texas Instruments TPS65217 Single-Chip PMIC for Battery-Powered Systems
+
+Required properties:
+- compatible: "ti,tps65217"
+- reg: I2C slave address.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: The number of cells to describe an IRQ, this should be 1.
+- backlight: Child node that specify the backlight regulator sub-device. See:
+	Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt
+- charger: Child node that specify the charger sub-device. See:
+	Documentation/devicetree/bindings/power/supply/tps65217_charger.txt
+- pwrbutton: Child node that specify the power button sub-device. See:
+	Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
+- regulators: List of child nodes that specify the regulator initialization
+	data. See:
+	Documentation/devicetree/bindings/regulator/tps65217.txt.
+
+Optional properties:
+- ti,pmic-shutdown-controller: Telling the PMIC to shutdown on PWR_EN toggle.
+
+Example:
+
+	tps: tps@24 {
+		compatible = "ti,tps65217";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		ti,pmic-shutdown-controller;
+
+		backlight {
+			compatible = "ti,tps65217-bl";
+			status = "disabled";
+		};
+
+		charger {
+			compatible = "ti,tps65217-charger";
+			status = "disabled";
+		};
+
+		pwrbutton {
+			compatible = "ti,tps65217-pwrbutton";
+			status = "disabled";
+		};
+
+		regulators {
+			compatible = "ti,tps65217-pmic";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dcdc1_reg: dcdc1 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			dcdc2_reg: dcdc2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			dcdc3_reg: dcc3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt
index 4f05d20..2d9b519 100644
--- a/Documentation/devicetree/bindings/regulator/tps65217.txt
+++ b/Documentation/devicetree/bindings/regulator/tps65217.txt
@@ -1,8 +1,10 @@
-TPS65217 family of regulators
+Texas Instruments TPS65217 family of regulators
+
+This module is part of the TPS65217. For more details about the whole
+TPS65217 chip see Documentation/devicetree/bindings/mfd/tps65217.txt.
 
 Required properties:
-- compatible: "ti,tps65217"
-- reg: I2C slave address
+- compatible: "ti,tps65217-pmic"
 - regulators: list of regulators provided by this controller, must be named
   after their hardware counterparts: dcdc[1-3] and ldo[1-4]
 - regulators: This is the list of child nodes that specify the regulator
-- 
2.9.3

             reply	other threads:[~2017-06-07 10:33 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-07 10:32 Enric Balletbo i Serra [this message]
2017-06-07 10:32 ` [PATCH 2/4] ARM: dts: tps65217: Add backlight and pmic device Enric Balletbo i Serra
2017-06-07 10:32 ` [PATCH 3/4] regulator: tps65217: Fix module autoload for devices registered via OF Enric Balletbo i Serra
2017-06-07 10:32 ` [PATCH 4/4] mfd: tps65217: Instantiate sub-devices from device tree Enric Balletbo i Serra
2017-06-07 16:05   ` Grygorii Strashko
2017-06-08 13:16     ` Enric Balletbo Serra
2017-06-08 17:11       ` Grygorii Strashko
2017-06-08 21:35         ` Enric Balletbo Serra
2017-06-08 22:30           ` Javier Martinez Canillas
2017-06-08 23:47             ` Grygorii Strashko
2017-06-09  0:00               ` Javier Martinez Canillas
2017-06-09  9:55                 ` Enric Balletbo Serra
2017-06-09 14:03 ` [PATCH 1/4] dt-bindings: tps65217: Update binding documentation Rob Herring
2017-06-09 22:30   ` Enric Balletbo Serra
2017-06-13 14:43     ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170607103242.16008-1-enric.balletbo@collabora.com \
    --to=enric.balletbo@collabora.com \
    --cc=daniel.thompson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=jacek.anaszewski@gmail.com \
    --cc=javier@dowhile0.org \
    --cc=jingoohan1@gmail.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    --cc=rpurdie@rpsys.net \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).