From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752140AbdFVMpz (ORCPT ); Thu, 22 Jun 2017 08:45:55 -0400 Received: from bhuna.collabora.co.uk ([46.235.227.227]:46334 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751094AbdFVMpx (ORCPT ); Thu, 22 Jun 2017 08:45:53 -0400 From: Enric Balletbo i Serra To: Zhang Rui , rjw@rjwysocki.net, Len Brown , linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Guenter Roeck , Sameer Nanda Subject: [PATCH] acpi: thermal: honor "mode" sysfs file setting Date: Thu, 22 Jun 2017 14:45:42 +0200 Message-Id: <20170622124542.12063-1-enric.balletbo@collabora.com> X-Mailer: git-send-email 2.9.3 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Sameer Nanda Under each thermal zone there is a file called "mode". Writing enabled or disabled to this file allows a given thermal zone to be enabled or disabled. Honor writes to this file by enabling or disabling the polling timers. With this change, in the acpi_thermal_add path, acpi_thermal_get_info gets called before acpi_thermal_register_thermal_zone. Since tz_enabled was getting set to 1 only in acpi_thermal_register_thermal_zone, acpi_thermal_get_info ended up disabling thermal polling so moved the setting of tz_enabled to 1 into acpi_thermal_add itself. After this patch echoing enabled|disabled to "mode" sysfs will start/stop the polling of the temperature. Signed-off-by: Sameer Nanda Signed-off-by: Enric Balletbo i Serra --- drivers/acpi/thermal.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 1d0417b..68ad9fe 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -223,6 +223,17 @@ static int acpi_thermal_get_polling_frequency(struct acpi_thermal *tz) if (!tz) return -EINVAL; + if (tz->tz_enabled == THERMAL_DEVICE_DISABLED) { + tz->polling_frequency = 0; + return 0; + } + + /* Get default polling frequency [_TZP] (optional) */ + if (tzp) { + tz->polling_frequency = tzp; + return 0; + } + status = acpi_evaluate_integer(tz->device->handle, "_TZP", NULL, &tmp); if (ACPI_FAILURE(status)) return -ENODEV; @@ -582,6 +593,14 @@ static int thermal_set_mode(struct thermal_zone_device *thermal, ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s kernel ACPI thermal control\n", tz->tz_enabled ? "Enable" : "Disable")); + + acpi_thermal_get_polling_frequency(tz); + + mutex_lock(&tz->thermal_zone->lock); + tz->thermal_zone->polling_delay = tz->polling_frequency * 100; + tz->thermal_zone->passive_delay = tz->polling_frequency * 100; + mutex_unlock(&tz->thermal_zone->lock); + acpi_thermal_check(tz); } return 0; @@ -930,8 +949,6 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) if (ACPI_FAILURE(status)) return -ENODEV; - tz->tz_enabled = 1; - dev_info(&tz->device->dev, "registered as thermal_zone%d\n", tz->thermal_zone->id); return 0; @@ -1039,11 +1056,7 @@ static int acpi_thermal_get_info(struct acpi_thermal *tz) if (!result) tz->flags.cooling_mode = 1; - /* Get default polling frequency [_TZP] (optional) */ - if (tzp) - tz->polling_frequency = tzp; - else - acpi_thermal_get_polling_frequency(tz); + acpi_thermal_get_polling_frequency(tz); return 0; } @@ -1088,6 +1101,7 @@ static int acpi_thermal_add(struct acpi_device *device) return -ENOMEM; tz->device = device; + tz->tz_enabled = 1; strcpy(tz->name, device->pnp.bus_id); strcpy(acpi_device_name(device), ACPI_THERMAL_DEVICE_NAME); strcpy(acpi_device_class(device), ACPI_THERMAL_CLASS); -- 2.9.3