From: Wolfram Sang <wsa@the-dreams.de>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>,
x86@kernel.org, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
linux-kernel@vger.kernel.org,
Baolin Wang <baolin.wang@spreadtrum.com>,
linux-i2c@vger.kernel.org,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Shawn Guo <shawnguo@kernel.org>
Subject: Re: [PATCH v1] x86/io: Include asm-generic/io.h to architectural code
Date: Tue, 27 Jun 2017 22:06:28 +0200 [thread overview]
Message-ID: <20170627200628.7oupopm3m7nbpukp@ninjato> (raw)
In-Reply-To: <20170627160641.75712-1-andriy.shevchenko@linux.intel.com>
[-- Attachment #1: Type: text/plain, Size: 4391 bytes --]
On Tue, Jun 27, 2017 at 07:06:41PM +0300, Andy Shevchenko wrote:
> asm-generic/io.h defines few helpers which would be useful in the drivers,
> such as writesb() and readsb().
>
> Include it to the asm/io.h in architectural folder.
>
> Note, to apply above we need to define macros for functions which do not have
> them yet defined, such as readb() or writeb(). This is done here as well.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Yes, we had to drop COMPILE_TEST from drivers because of readsb/writesb
not being available. Would be nice to have that fixed.
Acked-by: Wolfram Sang <wsa@the-dreams.de>
No thorough review, though. Adding Shawn to CC who also hit this issue
recently.
> ---
> arch/x86/include/asm/io.h | 36 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
> index 7afb0e2f07f4..abb3090a5822 100644
> --- a/arch/x86/include/asm/io.h
> +++ b/arch/x86/include/asm/io.h
> @@ -69,6 +69,9 @@ build_mmio_write(__writeb, "b", unsigned char, "q", )
> build_mmio_write(__writew, "w", unsigned short, "r", )
> build_mmio_write(__writel, "l", unsigned int, "r", )
>
> +#define readb readb
> +#define readw readw
> +#define readl readl
> #define readb_relaxed(a) __readb(a)
> #define readw_relaxed(a) __readw(a)
> #define readl_relaxed(a) __readl(a)
> @@ -76,6 +79,9 @@ build_mmio_write(__writel, "l", unsigned int, "r", )
> #define __raw_readw __readw
> #define __raw_readl __readl
>
> +#define writeb writeb
> +#define writew writew
> +#define writel writel
> #define writeb_relaxed(v, a) __writeb(v, a)
> #define writew_relaxed(v, a) __writew(v, a)
> #define writel_relaxed(v, a) __writel(v, a)
> @@ -119,6 +125,7 @@ static inline phys_addr_t virt_to_phys(volatile void *address)
> {
> return __pa(address);
> }
> +#define virt_to_phys virt_to_phys
>
> /**
> * phys_to_virt - map physical address to virtual
> @@ -137,6 +144,7 @@ static inline void *phys_to_virt(phys_addr_t address)
> {
> return __va(address);
> }
> +#define phys_to_virt phys_to_virt
>
> /*
> * Change "struct page" to physical address.
> @@ -220,6 +228,7 @@ memset_io(volatile void __iomem *addr, unsigned char val, size_t count)
> {
> memset((void __force *)addr, val, count);
> }
> +#define memset_io(dst,c,count) memset_io(dst,c,count)
>
> /**
> * memcpy_fromio Copy a block of data from I/O memory
> @@ -234,6 +243,7 @@ memcpy_fromio(void *dst, const volatile void __iomem *src, size_t count)
> {
> memcpy(dst, (const void __force *)src, count);
> }
> +#define memcpy_fromio(to,from,count) memcpy_fromio(to,from,count)
>
> /**
> * memcpy_toio Copy a block of data into I/O memory
> @@ -248,6 +258,7 @@ memcpy_toio(volatile void __iomem *dst, const void *src, size_t count)
> {
> memcpy((void __force *)dst, src, count);
> }
> +#define memcpy_toio(to,from,count) memcpy_toio(to,from,count)
>
> /*
> * ISA space is 'always mapped' on a typical x86 system, no need to
> @@ -341,9 +352,32 @@ BUILDIO(b, b, char)
> BUILDIO(w, w, short)
> BUILDIO(l, , int)
>
> +#define inb inb
> +#define inw inw
> +#define inl inl
> +#define inb_p inb_p
> +#define inw_p inw_p
> +#define inl_p inl_p
> +#define insb insb
> +#define insw insw
> +#define insl insl
> +
> +#define outb outb
> +#define outw outw
> +#define outl outl
> +#define outb_p outb_p
> +#define outw_p outw_p
> +#define outl_p outl_p
> +#define outsb outsb
> +#define outsw outsw
> +#define outsl outsl
> +
> extern void *xlate_dev_mem_ptr(phys_addr_t phys);
> extern void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr);
>
> +#define xlate_dev_mem_ptr xlate_dev_mem_ptr
> +#define unxlate_dev_mem_ptr unxlate_dev_mem_ptr
> +
> extern int ioremap_change_attr(unsigned long vaddr, unsigned long size,
> enum page_cache_mode pcm);
> extern void __iomem *ioremap_wc(resource_size_t offset, unsigned long size);
> @@ -365,6 +399,8 @@ extern bool xen_biovec_phys_mergeable(const struct bio_vec *vec1,
>
> #define IO_SPACE_LIMIT 0xffff
>
> +#include <asm-generic/io.h>
> +
> #ifdef CONFIG_MTRR
> extern int __must_check arch_phys_wc_index(int handle);
> #define arch_phys_wc_index arch_phys_wc_index
> --
> 2.11.0
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2017-06-27 20:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-27 16:06 [PATCH v1] x86/io: Include asm-generic/io.h to architectural code Andy Shevchenko
2017-06-27 20:06 ` Wolfram Sang [this message]
2017-06-27 20:53 ` Andy Shevchenko
2017-06-29 2:15 ` [lkp-robot] [x86/io] 1464f922e3: kernel_BUG_at_lib/ioremap.c kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170627200628.7oupopm3m7nbpukp@ninjato \
--to=wsa@the-dreams.de \
--cc=andriy.shevchenko@linux.intel.com \
--cc=baolin.wang@spreadtrum.com \
--cc=hpa@zytor.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=mingo@redhat.com \
--cc=shawnguo@kernel.org \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).