From: Brian Masney <masneyb@onstation.org>
To: jic23@kernel.org, linux-iio@vger.kernel.org
Cc: gregkh@linuxfoundation.org, devel@driverdev.osuosl.org,
knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
linux-kernel@vger.kernel.org, Jon.Brenner@ams.com
Subject: [PATCH 3/6] staging: iio: tsl2x7x: remove tsl2x7x_i2c_read()
Date: Thu, 29 Jun 2017 13:03:49 -0400 [thread overview]
Message-ID: <20170629170352.11264-4-masneyb@onstation.org> (raw)
In-Reply-To: <20170629170352.11264-1-masneyb@onstation.org>
tsl2x7x_i2c_read() would call i2c_smbus_write_byte() and
i2c_smbus_read_byte(). These two i2c functions can be replaced with a
single call to i2c_smbus_read_byte_data(). This patch removes the
tsl2x7x_i2c_read() function and replaces all occurances with a call to
i2c_smbus_read_byte_data().
Signed-off-by: Brian Masney <masneyb@onstation.org>
---
drivers/staging/iio/light/tsl2x7x.c | 71 ++++++++++++-------------------------
1 file changed, 22 insertions(+), 49 deletions(-)
diff --git a/drivers/staging/iio/light/tsl2x7x.c b/drivers/staging/iio/light/tsl2x7x.c
index 3ea29e2..d917b9d 100644
--- a/drivers/staging/iio/light/tsl2x7x.c
+++ b/drivers/staging/iio/light/tsl2x7x.c
@@ -285,35 +285,6 @@ static const u8 device_channel_config[] = {
};
/**
- * tsl2x7x_i2c_read() - Read a byte from a register.
- * @client: i2c client
- * @reg: device register to read from
- * @*val: pointer to location to store register contents.
- *
- */
-static int
-tsl2x7x_i2c_read(struct i2c_client *client, u8 reg, u8 *val)
-{
- int ret;
-
- /* select register to write */
- ret = i2c_smbus_write_byte(client, (TSL2X7X_CMD_REG | reg));
- if (ret < 0) {
- dev_err(&client->dev, "failed to write register %x\n", reg);
- return ret;
- }
-
- /* read the data */
- ret = i2c_smbus_read_byte(client);
- if (ret >= 0)
- *val = (u8)ret;
- else
- dev_err(&client->dev, "failed to read register %x\n", reg);
-
- return ret;
-}
-
-/**
* tsl2x7x_get_lux() - Reads and calculates current lux value.
* @indio_dev: pointer to IIO device
*
@@ -352,15 +323,15 @@ static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
goto out_unlock;
}
- ret = tsl2x7x_i2c_read(chip->client,
- (TSL2X7X_CMD_REG | TSL2X7X_STATUS), &buf[0]);
+ ret = i2c_smbus_read_byte_data(chip->client,
+ TSL2X7X_CMD_REG | TSL2X7X_STATUS);
if (ret < 0) {
dev_err(&chip->client->dev,
"%s: Failed to read STATUS Reg\n", __func__);
goto out_unlock;
}
/* is data new & valid */
- if (!(buf[0] & TSL2X7X_STA_ADC_VALID)) {
+ if (!(ret & TSL2X7X_STA_ADC_VALID)) {
dev_err(&chip->client->dev,
"%s: data not valid yet\n", __func__);
ret = chip->als_cur_info.lux; /* return LAST VALUE */
@@ -368,14 +339,16 @@ static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
}
for (i = 0; i < 4; i++) {
- ret = tsl2x7x_i2c_read(chip->client,
- (TSL2X7X_CMD_REG |
- (TSL2X7X_ALS_CHAN0LO + i)), &buf[i]);
+ int reg = TSL2X7X_CMD_REG | (TSL2X7X_ALS_CHAN0LO + i);
+
+ ret = i2c_smbus_read_byte_data(chip->client, reg);
if (ret < 0) {
dev_err(&chip->client->dev,
"failed to read. err=%x\n", ret);
goto out_unlock;
}
+
+ buf[i] = ret;
}
/* clear any existing interrupt status */
@@ -475,7 +448,6 @@ static int tsl2x7x_get_prox(struct iio_dev *indio_dev)
{
int i;
int ret;
- u8 status;
u8 chdata[2];
struct tsl2X7X_chip *chip = iio_priv(indio_dev);
@@ -485,8 +457,8 @@ static int tsl2x7x_get_prox(struct iio_dev *indio_dev)
return -EBUSY;
}
- ret = tsl2x7x_i2c_read(chip->client,
- (TSL2X7X_CMD_REG | TSL2X7X_STATUS), &status);
+ ret = i2c_smbus_read_byte_data(chip->client,
+ TSL2X7X_CMD_REG | TSL2X7X_STATUS);
if (ret < 0) {
dev_err(&chip->client->dev, "i2c err=%d\n", ret);
goto prox_poll_err;
@@ -498,7 +470,7 @@ static int tsl2x7x_get_prox(struct iio_dev *indio_dev)
case tmd2671:
case tsl2771:
case tmd2771:
- if (!(status & TSL2X7X_STA_ADC_VALID))
+ if (!(ret & TSL2X7X_STA_ADC_VALID))
goto prox_poll_err;
break;
case tsl2572:
@@ -506,17 +478,19 @@ static int tsl2x7x_get_prox(struct iio_dev *indio_dev)
case tmd2672:
case tsl2772:
case tmd2772:
- if (!(status & TSL2X7X_STA_PRX_VALID))
+ if (!(ret & TSL2X7X_STA_PRX_VALID))
goto prox_poll_err;
break;
}
for (i = 0; i < 2; i++) {
- ret = tsl2x7x_i2c_read(chip->client,
- (TSL2X7X_CMD_REG |
- (TSL2X7X_PRX_LO + i)), &chdata[i]);
+ int reg = TSL2X7X_CMD_REG | (TSL2X7X_PRX_LO + i);
+
+ ret = i2c_smbus_read_byte_data(chip->client, reg);
if (ret < 0)
goto prox_poll_err;
+
+ chdata[i] = ret;
}
chip->prox_data =
@@ -1486,7 +1460,7 @@ static DEVICE_ATTR_RW(in_intensity0_thresh_period);
static DEVICE_ATTR_RW(in_proximity0_thresh_period);
/* Use the default register values to identify the Taos device */
-static int tsl2x7x_device_id(unsigned char *id, int target)
+static int tsl2x7x_device_id(int *id, int target)
{
switch (target) {
case tsl2571:
@@ -1843,7 +1817,6 @@ static int tsl2x7x_probe(struct i2c_client *clientp,
const struct i2c_device_id *id)
{
int ret;
- unsigned char device_id;
struct iio_dev *indio_dev;
struct tsl2X7X_chip *chip;
@@ -1855,13 +1828,13 @@ static int tsl2x7x_probe(struct i2c_client *clientp,
chip->client = clientp;
i2c_set_clientdata(clientp, indio_dev);
- ret = tsl2x7x_i2c_read(chip->client,
- TSL2X7X_CHIPID, &device_id);
+ ret = i2c_smbus_read_byte_data(chip->client,
+ TSL2X7X_CMD_REG | TSL2X7X_CHIPID);
if (ret < 0)
return ret;
- if ((!tsl2x7x_device_id(&device_id, id->driver_data)) ||
- (tsl2x7x_device_id(&device_id, id->driver_data) == -EINVAL)) {
+ if ((!tsl2x7x_device_id(&ret, id->driver_data)) ||
+ (tsl2x7x_device_id(&ret, id->driver_data) == -EINVAL)) {
dev_info(&chip->client->dev,
"%s: i2c device found does not match expected id\n",
__func__);
--
2.9.4
next prev parent reply other threads:[~2017-06-29 17:13 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-29 17:03 [PATCH 0/6] staging: iio: tsl2x7x: staging cleanups Brian Masney
2017-06-29 17:03 ` [PATCH 1/6] staging: iio: tsl2x7x: add of_match table for device tree support Brian Masney
2017-07-06 18:55 ` Rob Herring
2017-06-29 17:03 ` [PATCH 2/6] staging: iio: tsl2x7x: remove redundant power_state sysfs attribute Brian Masney
2017-06-29 17:03 ` Brian Masney [this message]
2017-06-29 19:26 ` [PATCH 3/6] staging: iio: tsl2x7x: remove tsl2x7x_i2c_read() Frans Klaver
2017-06-29 17:03 ` [PATCH 4/6] staging: iio: tsl2x7x: cleaned up i2c calls in tsl2x7x_als_calibrate() Brian Masney
2017-06-29 17:03 ` [PATCH 5/6] staging: iio: tsl2x7x: refactor {read,write}_event_value to allow handling multiple iio_event_infos Brian Masney
2017-07-01 9:40 ` Jonathan Cameron
2017-07-01 10:37 ` Brian Masney
2017-07-01 11:58 ` Jonathan Cameron
2017-06-29 17:03 ` [PATCH 6/6] staging: iio: tsl2x7x: use usleep_range() instead of mdelay() Brian Masney
2017-06-30 15:21 ` [PATCH 0/6] staging: iio: tsl2x7x: staging cleanups Brian Masney
2017-06-30 16:08 ` Jon Brenner
2017-07-01 9:42 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170629170352.11264-4-masneyb@onstation.org \
--to=masneyb@onstation.org \
--cc=Jon.Brenner@ams.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).