From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755152AbdGCQvS (ORCPT ); Mon, 3 Jul 2017 12:51:18 -0400 Received: from smtprelay2.synopsys.com ([198.182.60.111]:49634 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755098AbdGCQvQ (ORCPT ); Mon, 3 Jul 2017 12:51:16 -0400 From: Eugeniy Paltsev To: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org, Vineet Gupta , Alexey Brodkin , Rob Herring , devicetree@vger.kernel.org, Eugeniy Paltsev Subject: [PATCH 0/3 v7] hsdk: initial port for HSDK board Date: Mon, 3 Jul 2017 19:51:06 +0300 Message-Id: <20170703165109.31535-1-Eugeniy.Paltsev@synopsys.com> X-Mailer: git-send-email 2.9.3 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This series introduces some required preparations and initial port of ARC HS Development Kit board with some basic features such as serial port, USB, SD/MMC and Ethernet. Essentially we run Linux kernel on all 4 cores (i.e. utilize SMP) and heavily use IO Coherency for speeding-up DMA-aware peripherals. Note as opposed to other ARC boards we link Linux kernel to 0x9000_0000 intentionally because cores 1 and 3 configured with DCCM situated at our more usual link base 0x8000_0000. Note that two patches of this series ("ARC: Decouple linux kernel memory address and link address" and "ARC: Set IO-coherency aperture base to LINUX_LINK_BASE") are prerequisites for HDSK support as its hardware configuration differs quite a bit from what we used to have on other ARC boards. Alexey Brodkin (1): ARC: hsdk: initial port for HSDK board Eugeniy Paltsev (2): ARC: Set IO-coherency aperture base to LINUX_LINK_BASE ARC: Decouple linux kernel memory address and link address Changes v6 -> v7: * DTS: get rid of skeleton.dts, move cpus nodes to hsdk.dts * DTS: style fixes * Enable loadable modules, module unloading and NFS client as defaults * Get rid of ARC_PLAT_HSDK board config option Changes v5 -> v6: * Add support of USB-to-HDMI adapter * Revert removing of resetting CREG_PAE bits. PAE remapping for DMA clients does not work due to an RTL bug, so CREG_PAE register must be programmed to all zeroes, otherwise it will cause problems with DMA to/from peripherals even if PAE40 is not used. Changes v4 -> v5: * Move DCCM outside of 0x8000_0000 adress at kernel boot time. * Decouple linux kernel memory address and link address. * Remove hardcoding of IO-coherency aperture base. * Remove resetting CREG_PAE bits as default value is suitable for us. Changes v3 -> v4: * Removed senseless "ranges" property from "memory" node in .dts * Refined early-boot code: - ICCM relocation should be done on each and every core that sports ICCM so we leave it in init_per_cpu(). Even though init_per_cpu() gets called on the master core pretty late still it is way much earlier than that moment when it might affect us - as it only huts us when addresses in 0x7z-0x7fff_ffff range are used, i.e. virtual addresses that we don't use during init. This also makes code much cleaner compared to additional check in case of master etc. Changes v2 -> v3: * Added Rob to Cc-list for DT binding approval * Removed mention of prerequsite patch from commit message * Removed hsdk_early_init() as hsdk_init_per_cpu() is executed on all cores anyways including master * Cleaned-up board's .dts a little bit * Removed CONFIG_DP83867_PHY from defconfig as it was only used on FPGA prototype, on real board we use MICREL PHY which is still selected Changes v1 -> v2: * Update copyright year from 2016 to more up to date 2017 * Merge early UART clock with AXS10x as in both cases that's 33.3 MHz * Bump memory to 1Gb, we don't use more for now because it requires trickier IOC setup and usage * Update early platform init code: - Added missing fixup_pae_regs() to per-cpu init - Mark most of functions as "static __init" - Use writel_relaxed() for setting CREG_PAE, CREG_PAE_UPDATE is still written with stronger writel() since we don't want reordering to happen, otherwise value written to CREG_PAE won't be applied Documentation/devicetree/bindings/arc/hsdk.txt | 7 ++ arch/arc/Kconfig | 6 + arch/arc/Makefile | 1 + arch/arc/boot/dts/hsdk.dts | 150 +++++++++++++++++++++++++ arch/arc/boot/dts/include/dt-bindings | 1 + arch/arc/configs/hsdk_defconfig | 72 ++++++++++++ arch/arc/include/asm/page.h | 2 +- arch/arc/kernel/devtree.c | 5 +- arch/arc/mm/cache.c | 33 ++++-- arch/arc/mm/init.c | 6 +- arch/arc/plat-hsdk/Kconfig | 12 ++ arch/arc/plat-hsdk/Makefile | 9 ++ arch/arc/plat-hsdk/platform.c | 77 +++++++++++++ 13 files changed, 366 insertions(+), 15 deletions(-) create mode 100644 Documentation/devicetree/bindings/arc/hsdk.txt create mode 100644 arch/arc/boot/dts/hsdk.dts create mode 120000 arch/arc/boot/dts/include/dt-bindings create mode 100644 arch/arc/configs/hsdk_defconfig create mode 100644 arch/arc/plat-hsdk/Kconfig create mode 100644 arch/arc/plat-hsdk/Makefile create mode 100644 arch/arc/plat-hsdk/platform.c -- 2.9.3