From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S1751355AbdGMLJq (ORCPT <rfc822;w@1wt.eu>);
        Thu, 13 Jul 2017 07:09:46 -0400
Received: from internet2.beckhoff.com ([194.25.186.210]:63040 "EHLO
        Internet2.beckhoff.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
        with ESMTP id S1751106AbdGMLJp (ORCPT
        <rfc822;linux-kernel@vger.kernel.org>);
        Thu, 13 Jul 2017 07:09:45 -0400
X-Greylist: delayed 300 seconds by postgrey-1.27 at vger.kernel.org; Thu, 13 Jul 2017 07:09:44 EDT
From: <linux-kernel-dev@beckhoff.com>
To: "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>,
        "open list:DRM PANEL DRIVERS" <dri-devel@lists.freedesktop.org>
CC: Patrick Bruenn <p.bruenn@beckhoff.com>,
        Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
        Russell King <linux@armlinux.org.uk>, Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <kernel@pengutronix.de>,
        Thierry Reding <thierry.reding@gmail.com>,
        David Airlie <airlied@linux.ie>, Fabio Estevam <fabio.estevam@nxp.com>,
        "moderated list:ARM PORT" <linux-arm-kernel@lists.infradead.org>,
        open list <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 0/2] Add CX9020 device tree
Date: Thu, 13 Jul 2017 13:04:11 +0200
Message-ID: <20170713110413.12721-1-linux-kernel-dev@beckhoff.com>
X-Mailer: git-send-email 2.11.0
In-Reply-To: <20170712090408.12212-1-linux-kernel-dev@beckhoff.com>
References: <20170712090408.12212-1-linux-kernel-dev@beckhoff.com>
MIME-Version: 1.0
Content-Type: text/plain
X-Originating-IP: [172.17.66.104]
X-OLX-Disclaimer: Done
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

From: Patrick Bruenn <p.bruenn@beckhoff.com>

Add device tree for Beckhoff CX9020 Embedded PC.

The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc

Patrick Bruenn (2):
  ARM: dts: imx: add CX9020 Embedded PC device tree
  drm/panel: simple: Add support for ddc-only panel

 arch/arm/boot/dts/Makefile           |   1 +
 arch/arm/boot/dts/imx53-cx9020.dts   | 370 +++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/panel/panel-simple.c |   6 +
 3 files changed, 377 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx53-cx9020.dts

-- 
2.11.0