From: Hans de Goede <hdegoede@redhat.com>
To: Darren Hart <dvhart@infradead.org>,
Andy Shevchenko <andy@infradead.org>,
Wolfram Sang <wsa@the-dreams.de>,
Sebastian Reichel <sre@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Guenter Roeck <linux@roeck-us.net>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>,
platform-driver-x86@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
Liam Breck <liam@networkimprov.net>,
Tony Lindgren <tony@atomide.com>,
linux-pm@vger.kernel.org, devel@driverdev.osuosl.org
Subject: [PATCH 10/18] staging: typec: fusb302: Add support for fcs,vbus-regulator-name device-property
Date: Sun, 6 Aug 2017 14:35:47 +0200 [thread overview]
Message-ID: <20170806123555.5124-11-hdegoede@redhat.com> (raw)
In-Reply-To: <20170806123555.5124-1-hdegoede@redhat.com>
On devicetree platforms the fusb302 dt-node will have a vbus regulator
property with a phandle to the regulator.
On ACPI platforms, there are no phandles and we need to get the vbus by a
system wide unique name. Add support for a new "fcs,vbus-regulator-name"
device-property which ACPI platform code can set to pass the name.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/staging/typec/fusb302/fusb302.c | 28 ++++++++++++++++++++++------
1 file changed, 22 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c
index e1e08f57af99..c3bcc5484ade 100644
--- a/drivers/staging/typec/fusb302/fusb302.c
+++ b/drivers/staging/typec/fusb302/fusb302.c
@@ -1722,6 +1722,28 @@ static int fusb302_probe(struct i2c_client *client,
return -EPROBE_DEFER;
}
+ /*
+ * Devicetree platforms should get vbus from their dt-node.
+ * On ACPI platforms, we need to get the vbus by a system wide unique
+ * name, which is set in a device prop by the platform code.
+ */
+ if (device_property_read_string(dev, "fcs,vbus-regulator-name",
+ &name) == 0) {
+ /*
+ * Use regulator_get_optional so that we can detect if we need
+ * to defer the probe rather then getting the dummy-regulator.
+ */
+ chip->vbus = devm_regulator_get_optional(dev, name);
+ if (IS_ERR(chip->vbus)) {
+ ret = PTR_ERR(chip->vbus);
+ return (ret == -ENODEV) ? -EPROBE_DEFER : ret;
+ }
+ } else {
+ chip->vbus = devm_regulator_get(dev, "vbus");
+ if (IS_ERR(chip->vbus))
+ return PTR_ERR(chip->vbus);
+ }
+
ret = tcpm_register_psy(chip->dev, &chip->tcpc_dev,
"fusb302-typec-source");
if (ret < 0)
@@ -1739,12 +1761,6 @@ static int fusb302_probe(struct i2c_client *client,
INIT_DELAYED_WORK(&chip->bc_lvl_handler, fusb302_bc_lvl_handler_work);
init_tcpc_dev(&chip->tcpc_dev);
- chip->vbus = devm_regulator_get(chip->dev, "vbus");
- if (IS_ERR(chip->vbus)) {
- ret = PTR_ERR(chip->vbus);
- goto destroy_workqueue;
- }
-
if (client->irq) {
chip->gpio_int_n_irq = client->irq;
} else {
--
2.13.3
next prev parent reply other threads:[~2017-08-06 12:38 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-06 12:35 [PATCH 00/18] Hookup typec power-negotation to the PMIC and charger Hans de Goede
2017-08-06 12:35 ` [PATCH 01/18] staging: typec: tcpm: Add get_usb2_current_limit tcpc_dev callback Hans de Goede
2017-08-06 14:18 ` Guenter Roeck
2017-08-06 14:29 ` Hans de Goede
2017-08-06 14:52 ` Guenter Roeck
2017-08-06 12:35 ` [PATCH 02/18] staging: typec: tcpm: Add extcon helper functions for USB2 current limit detect Hans de Goede
2017-08-06 14:07 ` Guenter Roeck
2017-08-06 12:35 ` [PATCH 03/18] staging: typec: tcpm: Split tcpm code into tcpm-core.c and tcpm-helpers.c Hans de Goede
2017-08-06 12:35 ` [PATCH 04/18] staging: typec: tcpm: Add helpers for exporting current-limit through a psy Hans de Goede
2017-08-06 14:13 ` Guenter Roeck
2017-08-06 14:21 ` Hans de Goede
2017-08-06 14:41 ` Guenter Roeck
2017-08-06 12:35 ` [PATCH 05/18] staging: typec: fusb302: Set max supply voltage to 5V Hans de Goede
2017-08-06 12:35 ` [PATCH 06/18] staging: typec: fusb302: Get max snk mv/ma/mw from device-properties Hans de Goede
2017-08-06 14:03 ` Guenter Roeck
2017-08-06 12:35 ` [PATCH 07/18] staging: typec: fusb302: Use client->irq as irq if set Hans de Goede
2017-08-06 12:35 ` [PATCH 08/18] staging: typec: fusb302: Add support for USB2 charger detection through extcon Hans de Goede
2017-08-06 14:22 ` Guenter Roeck
2017-08-06 14:36 ` Hans de Goede
2017-08-06 14:58 ` Guenter Roeck
2017-08-06 12:35 ` [PATCH 09/18] staging: typec: fusb302: Use tcpm_set_current_limit_psy Hans de Goede
2017-08-06 14:24 ` Guenter Roeck
2017-08-06 12:35 ` Hans de Goede [this message]
2017-08-06 14:30 ` [PATCH 10/18] staging: typec: fusb302: Add support for fcs,vbus-regulator-name device-property Guenter Roeck
2017-08-06 14:52 ` Hans de Goede
2017-08-06 15:20 ` Guenter Roeck
2017-08-06 15:44 ` Hans de Goede
2017-08-07 11:10 ` Mark Brown
2017-08-07 14:41 ` Hans de Goede
2017-08-07 15:41 ` Mark Brown
2017-08-07 19:20 ` Hans de Goede
2017-08-08 9:39 ` Mark Brown
[not found] ` <0b75c318-0f71-c536-7c7f-9ba16b215690@redhat.com>
[not found] ` <20170808144217.c2fm25uge75p4lo2@sirena.org.uk>
2017-08-08 20:53 ` Hans de Goede
2017-08-06 12:35 ` [PATCH 11/18] power: supply: Fix power_supply_am_i_supplied to return -ENODEV when apropriate Hans de Goede
2017-08-06 14:31 ` Guenter Roeck
2017-08-06 14:54 ` Hans de Goede
2017-08-06 12:35 ` [PATCH 12/18] power: supply: Add power_supply_set_input_current_limit_from_supplier helper Hans de Goede
2017-08-06 12:35 ` [PATCH 13/18] power: supply: bq24190_charger: Export 5V boost converter as regulator Hans de Goede
2017-08-08 4:15 ` Tony Lindgren
2017-08-08 8:39 ` Liam Breck
2017-08-08 9:00 ` Hans de Goede
2017-08-08 18:57 ` Liam Breck
2017-08-08 21:09 ` Hans de Goede
2017-08-06 12:35 ` [PATCH 14/18] power: supply: bq24190_charger: Add input_current_limit property Hans de Goede
2017-08-06 12:35 ` [PATCH 15/18] power: supply: bq24190_charger: Get input_current_limit from our supplier Hans de Goede
2017-08-08 8:24 ` Liam Breck
2017-08-08 9:11 ` Hans de Goede
2017-08-06 12:35 ` [PATCH 16/18] power: supply: bq24190_charger: Remove extcon handling Hans de Goede
2017-08-08 8:27 ` Liam Breck
2017-08-08 9:12 ` Hans de Goede
2017-08-06 12:35 ` [PATCH 17/18] platform/x86: intel_cht_int33fe Update fusb302 type string, add properties Hans de Goede
2017-08-06 12:35 ` [PATCH 18/18] i2c-cht-wc: Add device-properties for fusb302 integration Hans de Goede
2017-08-06 14:35 ` Guenter Roeck
2017-08-06 15:05 ` Hans de Goede
2017-08-06 16:29 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170806123555.5124-11-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=andy@infradead.org \
--cc=devel@driverdev.osuosl.org \
--cc=dvhart@infradead.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=liam@networkimprov.net \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=platform-driver-x86@vger.kernel.org \
--cc=sre@kernel.org \
--cc=tony@atomide.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).