EISA has absolutely nothing to do with traps. The EISA bus detection does
not need to run in the very early boot. It's good enough to run it before
the EISA bus and drivers are initialized.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/Makefile |    1 +
 arch/x86/kernel/eisa.c   |   18 ++++++++++++++++++
 arch/x86/kernel/traps.c  |   13 -------------
 3 files changed, 19 insertions(+), 13 deletions(-)

--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -111,6 +111,7 @@ obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= parav
 obj-$(CONFIG_PARAVIRT_CLOCK)	+= pvclock.o
 obj-$(CONFIG_X86_PMEM_LEGACY_DEVICE) += pmem.o
 
+obj-$(CONFIG_EISA)		+= eisa.o
 obj-$(CONFIG_PCSPKR_PLATFORM)	+= pcspeaker.o
 
 obj-$(CONFIG_X86_CHECK_BIOS_CORRUPTION) += check.o
--- /dev/null
+++ b/arch/x86/kernel/eisa.c
@@ -0,0 +1,18 @@
+/*
+ * EISA specific code
+ *
+ * This file is licensed under the GPL V2
+ */
+#include <linux/ioport.h>
+#include <linux/eisa.h>
+
+static __init int eisa_bus_probe(void)
+{
+	void __iomem *p = ioremap(0x0FFFD9, 4);
+
+	if (readl(p) == 'E' + ('I'<<8) + ('S'<<16) + ('A'<<24))
+		EISA_bus = 1;
+	iounmap(p);
+	return 0;
+}
+subsys_initcall(eisa_bus_probe);
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -38,11 +38,6 @@
 #include <linux/smp.h>
 #include <linux/io.h>
 
-#ifdef CONFIG_EISA
-#include <linux/ioport.h>
-#include <linux/eisa.h>
-#endif
-
 #if defined(CONFIG_EDAC)
 #include <linux/edac.h>
 #endif
@@ -969,14 +964,6 @@ void __init trap_init(void)
 {
 	int i;
 
-#ifdef CONFIG_EISA
-	void __iomem *p = early_ioremap(0x0FFFD9, 4);
-
-	if (readl(p) == 'E' + ('I'<<8) + ('S'<<16) + ('A'<<24))
-		EISA_bus = 1;
-	early_iounmap(p, 4);
-#endif
-
 	set_intr_gate(X86_TRAP_DE, divide_error);
 	set_intr_gate_ist(X86_TRAP_NMI, &nmi, NMI_STACK);
 	/* int4 can be called from all */