[PATCH 1/8] ls1043ardb: add qe node to ls1043ardb

[PATCH 1/8] ls1043ardb: add qe node to ls1043ardb

[Zhao Qiang]

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 16 ++++++
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi    | 66 +++++++++++++++++++++++
 2 files changed, 82 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index c37110b..8f23f39 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -132,6 +132,22 @@
 	};
 };
 
+&uqe {
+	ucc_hdlc: ucc@2000 {
+		compatible = "fsl,ucc-hdlc";
+		rx-clock-name = "clk8";
+		tx-clock-name = "clk9";
+		fsl,rx-sync-clock = "rsync_pin";
+		fsl,tx-sync-clock = "tsync_pin";
+		fsl,tx-timeslot-mask = <0xfffffffe>;
+		fsl,rx-timeslot-mask = <0xfffffffe>;
+		fsl,tdm-framer-type = "e1";
+		fsl,tdm-id = <0>;
+		fsl,siram-entry-id = <0>;
+		fsl,tdm-interface;
+	};
+};
+
 &duart0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index ec13a6e..38e8e2b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -474,6 +474,72 @@
 			#interrupt-cells = <2>;
 		};
 
+		uqe: uqe@2400000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "qe";
+			compatible = "fsl,qe", "simple-bus";
+			ranges = <0x0 0x0 0x2400000 0x40000>;
+			reg = <0x0 0x2400000 0x0 0x480>;
+			brg-frequency = <100000000>;
+			bus-frequency = <200000000>;
+
+			fsl,qe-num-riscs = <1>;
+			fsl,qe-num-snums = <28>;
+
+			qeic: qeic@80 {
+				compatible = "fsl,qe-ic";
+				reg = <0x80 0x80>;
+				#address-cells = <0>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupts = <0 77 0x04 0 77 0x04>;
+			};
+
+			si1: si@700 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,ls1043-qe-si",
+						"fsl,t1040-qe-si";
+				reg = <0x700 0x80>;
+			};
+
+			siram1: siram@1000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,ls1043-qe-siram",
+						"fsl,t1040-qe-siram";
+				reg = <0x1000 0x800>;
+			};
+
+			ucc@2000 {
+				cell-index = <1>;
+				reg = <0x2000 0x200>;
+				interrupts = <32>;
+				interrupt-parent = <&qeic>;
+			};
+
+			ucc@2200 {
+				cell-index = <3>;
+				reg = <0x2200 0x200>;
+				interrupts = <34>;
+				interrupt-parent = <&qeic>;
+			};
+
+			muram@10000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,qe-muram", "fsl,cpm-muram";
+				ranges = <0x0 0x10000 0x6000>;
+
+				data-only@0 {
+					compatible = "fsl,qe-muram-data",
+					"fsl,cpm-muram-data";
+					reg = <0x0 0x6000>;
+				};
+			};
+		};
+
 		lpuart0: serial@2950000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2950000 0x0 0x1000>;
-- 
2.1.0.27.g96db324

[PATCH 2/8] ls1043ardb: add ds26522 node to dts

[Zhao Qiang]

add ds26522 node to fsl-ls1043a-rdb.dts

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index 8f23f39..11213ce 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -130,6 +130,22 @@
 		reg = <0>;
 		spi-max-frequency = <1000000>; /* input clock */
 	};
+
+	slic@2 {
+		compatible = "maxim,ds26522";
+		reg = <2>;
+		spi-max-frequency = <2000000>;
+		fsl,spi-cs-sck-delay = <100>;
+		fsl,spi-sck-cs-delay = <50>;
+	};
+
+	slic@3 {
+		compatible = "maxim,ds26522";
+		reg = <3>;
+		spi-max-frequency = <2000000>;
+		fsl,spi-cs-sck-delay = <100>;
+		fsl,spi-sck-cs-delay = <50>;
+	};
 };
 
 &uqe {
-- 
2.1.0.27.g96db324

[PATCH 3/8] QE: remove PPCisms for QE

[Zhao Qiang]

QE was supported on PowerPC, and dependent on PPC,
Now it is supported on other platforms. so remove PPCisms.

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
---
 drivers/net/ethernet/freescale/Kconfig | 11 ++---
 drivers/soc/fsl/qe/Kconfig             |  2 +-
 drivers/soc/fsl/qe/qe.c                | 80 ++++++++++++++++++++--------------
 drivers/soc/fsl/qe/qe_io.c             | 42 ++++++++----------
 drivers/soc/fsl/qe/qe_tdm.c            |  8 ++--
 drivers/soc/fsl/qe/ucc.c               | 10 ++---
 drivers/soc/fsl/qe/ucc_fast.c          | 74 ++++++++++++++++---------------
 drivers/tty/serial/Kconfig             |  2 +-
 drivers/tty/serial/ucc_uart.c          |  1 +
 drivers/usb/gadget/udc/Kconfig         |  2 +-
 drivers/usb/host/Kconfig               |  2 +-
 include/soc/fsl/qe/qe.h                |  1 -
 12 files changed, 124 insertions(+), 111 deletions(-)

diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
index 6e490fd2..015bdb8 100644
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -5,10 +5,11 @@
 config NET_VENDOR_FREESCALE
 	bool "Freescale devices"
 	default y
-	depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
-		   M523x || M527x || M5272 || M528x || M520x || M532x || \
-		   ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM) || \
-		   ARCH_LAYERSCAPE || COMPILE_TEST
+	depends on FSL_SOC || (QUICC_ENGINE && PPC32) || CPM1 || CPM2 || \
+		   PPC_MPC512x || M523x || M527x || M5272 || M528x || M520x || \
+		   M532x || ARCH_MXC || ARCH_MXS || \
+		   (PPC_MPC52xx && PPC_BESTCOMM) || ARCH_LAYERSCAPE || \
+		   COMPILE_TEST
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y.
 
@@ -73,7 +74,7 @@ config FSL_XGMAC_MDIO
 
 config UCC_GETH
 	tristate "Freescale QE Gigabit Ethernet"
-	depends on QUICC_ENGINE
+	depends on QUICC_ENGINE && FSL_SOC && PPC32
 	select FSL_PQ_MDIO
 	select PHYLIB
 	---help---
diff --git a/drivers/soc/fsl/qe/Kconfig b/drivers/soc/fsl/qe/Kconfig
index 73a2e08..b26b643 100644
--- a/drivers/soc/fsl/qe/Kconfig
+++ b/drivers/soc/fsl/qe/Kconfig
@@ -4,7 +4,7 @@
 
 config QUICC_ENGINE
 	bool "Freescale QUICC Engine (QE) Support"
-	depends on FSL_SOC && PPC32
+	depends on OF && HAS_IOMEM
 	select GENERIC_ALLOCATOR
 	select CRC32
 	help
diff --git a/drivers/soc/fsl/qe/qe.c b/drivers/soc/fsl/qe/qe.c
index ade168f..52aaf41 100644
--- a/drivers/soc/fsl/qe/qe.c
+++ b/drivers/soc/fsl/qe/qe.c
@@ -33,8 +33,6 @@
 #include <asm/pgtable.h>
 #include <soc/fsl/qe/immap_qe.h>
 #include <soc/fsl/qe/qe.h>
-#include <asm/prom.h>
-#include <asm/rheap.h>
 
 static void qe_snums_init(void);
 static int qe_sdma_init(void);
@@ -109,15 +107,27 @@ void qe_reset(void)
 		panic("sdma init failed!");
 }
 
+/* issue commands to QE, return 0 on success while -EIO on error
+ *
+ * @cmd: the command code, should be QE_INIT_TX_RX, QE_STOP_TX and so on
+ * @device: which sub-block will run the command, QE_CR_SUBBLOCK_UCCFAST1 - 8
+ * , QE_CR_SUBBLOCK_UCCSLOW1 - 8, QE_CR_SUBBLOCK_MCC1 - 3,
+ * QE_CR_SUBBLOCK_IDMA1 - 4 and such on.
+ * @mcn_protocol: specifies mode for the command for non-MCC, should be
+ * QE_CR_PROTOCOL_HDLC_TRANSPARENT, QE_CR_PROTOCOL_QMC, QE_CR_PROTOCOL_UART
+ * and such on.
+ * @cmd_input: command related data.
+ */
 int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
 {
 	unsigned long flags;
 	u8 mcn_shift = 0, dev_shift = 0;
-	u32 ret;
+	int ret;
+	int i;
 
 	spin_lock_irqsave(&qe_lock, flags);
 	if (cmd == QE_RESET) {
-		out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
+		iowrite32be((cmd | QE_CR_FLG), &qe_immr->cp.cecr);
 	} else {
 		if (cmd == QE_ASSIGN_PAGE) {
 			/* Here device is the SNUM, not sub-block */
@@ -134,20 +144,26 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
 				mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
 		}
 
-		out_be32(&qe_immr->cp.cecdr, cmd_input);
-		out_be32(&qe_immr->cp.cecr,
-			 (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
-			  mcn_protocol << mcn_shift));
+		iowrite32be(cmd_input, &qe_immr->cp.cecdr);
+		iowrite32be((cmd | QE_CR_FLG | ((u32)device << dev_shift) |
+			    (u32)mcn_protocol << mcn_shift), &qe_immr->cp.cecr);
 	}
 
 	/* wait for the QE_CR_FLG to clear */
-	ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
-			   100, 0);
+	ret = -EIO;
+	for (i = 0; i < 100; i++) {
+		if ((ioread32be(&qe_immr->cp.cecr) & QE_CR_FLG) == 0) {
+			ret = 0;
+			break;
+		}
+		udelay(1);
+	}
+
 	/* On timeout (e.g. failure), the expression will be false (ret == 0),
 	   otherwise it will be true (ret == 1). */
 	spin_unlock_irqrestore(&qe_lock, flags);
 
-	return ret == 1;
+	return ret;
 }
 EXPORT_SYMBOL(qe_issue_cmd);
 
@@ -166,8 +182,8 @@ static unsigned int brg_clk = 0;
 unsigned int qe_get_brg_clk(void)
 {
 	struct device_node *qe;
-	int size;
-	const u32 *prop;
+	u32 val;
+	int ret;
 
 	if (brg_clk)
 		return brg_clk;
@@ -179,9 +195,9 @@ unsigned int qe_get_brg_clk(void)
 			return brg_clk;
 	}
 
-	prop = of_get_property(qe, "brg-frequency", &size);
-	if (prop && size == sizeof(*prop))
-		brg_clk = *prop;
+	ret = of_property_read_u32(qe, "brg-frequency", &val);
+	if (!ret)
+		brg_clk = val;
 
 	of_node_put(qe);
 
@@ -221,7 +237,7 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
 	tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
 		QE_BRGC_ENABLE | div16;
 
-	out_be32(&qe_immr->brg.brgc[brg - QE_BRG1], tempval);
+	iowrite32be(tempval, &qe_immr->brg.brgc[brg - QE_BRG1]);
 
 	return 0;
 }
@@ -355,9 +371,9 @@ static int qe_sdma_init(void)
 			return -ENOMEM;
 	}
 
-	out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK);
- 	out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK |
- 					(0x1 << QE_SDMR_CEN_SHIFT)));
+	iowrite32be((u32)sdma_buf_offset & QE_SDEBCR_BA_MASK, &sdma->sdebcr);
+	iowrite32be((QE_SDMR_GLB_1_MSK | (0x1 << QE_SDMR_CEN_SHIFT)),
+		    &sdma->sdmr);
 
 	return 0;
 }
@@ -395,14 +411,14 @@ static void qe_upload_microcode(const void *base,
 			"uploading microcode '%s'\n", ucode->id);
 
 	/* Use auto-increment */
-	out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) |
-		QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR);
+	iowrite32be(be32_to_cpu(ucode->iram_offset) | QE_IRAM_IADD_AIE |
+		    QE_IRAM_IADD_BADDR, &qe_immr->iram.iadd);
 
 	for (i = 0; i < be32_to_cpu(ucode->count); i++)
-		out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i]));
+		iowrite32be(be32_to_cpu(code[i]), &qe_immr->iram.idata);
 	
 	/* Set I-RAM Ready Register */
-	out_be32(&qe_immr->iram.iready, be32_to_cpu(QE_IRAM_READY));
+	iowrite32be(be32_to_cpu(QE_IRAM_READY), &qe_immr->iram.iready);
 }
 
 /*
@@ -487,7 +503,7 @@ int qe_upload_firmware(const struct qe_firmware *firmware)
 	 * If the microcode calls for it, split the I-RAM.
 	 */
 	if (!firmware->split)
-		setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR);
+		qe_setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR);
 
 	if (firmware->soc.model)
 		printk(KERN_INFO
@@ -521,11 +537,11 @@ int qe_upload_firmware(const struct qe_firmware *firmware)
 			u32 trap = be32_to_cpu(ucode->traps[j]);
 
 			if (trap)
-				out_be32(&qe_immr->rsp[i].tibcr[j], trap);
+				iowrite32be(trap, &qe_immr->rsp[i].tibcr[j]);
 		}
 
 		/* Enable traps */
-		out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr));
+		iowrite32be(be32_to_cpu(ucode->eccr), &qe_immr->rsp[i].eccr);
 	}
 
 	qe_firmware_uploaded = 1;
@@ -644,9 +660,9 @@ EXPORT_SYMBOL(qe_get_num_of_risc);
 unsigned int qe_get_num_of_snums(void)
 {
 	struct device_node *qe;
-	int size;
 	unsigned int num_of_snums;
-	const u32 *prop;
+	u32 val;
+	int ret;
 
 	num_of_snums = 28; /* The default number of snum for threads is 28 */
 	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
@@ -660,9 +676,9 @@ unsigned int qe_get_num_of_snums(void)
 			return num_of_snums;
 	}
 
-	prop = of_get_property(qe, "fsl,qe-num-snums", &size);
-	if (prop && size == sizeof(*prop)) {
-		num_of_snums = *prop;
+	ret = of_property_read_u32(qe, "fsl,qe-num-snums", &val);
+	if (!ret) {
+		num_of_snums = val;
 		if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) {
 			/* No QE ever has fewer than 28 SNUMs */
 			pr_err("QE: number of snum is invalid\n");
diff --git a/drivers/soc/fsl/qe/qe_io.c b/drivers/soc/fsl/qe/qe_io.c
index 7ae59ab..8966e8b 100644
--- a/drivers/soc/fsl/qe/qe_io.c
+++ b/drivers/soc/fsl/qe/qe_io.c
@@ -22,8 +22,6 @@
 
 #include <asm/io.h>
 #include <soc/fsl/qe/qe.h>
-#include <asm/prom.h>
-#include <sysdev/fsl_soc.h>
 
 #undef DEBUG
 
@@ -61,16 +59,16 @@ void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir,
 	pin_mask1bit = (u32) (1 << (QE_PIO_PINS - (pin + 1)));
 
 	/* Set open drain, if required */
-	tmp_val = in_be32(&par_io->cpodr);
+	tmp_val = ioread32be(&par_io->cpodr);
 	if (open_drain)
-		out_be32(&par_io->cpodr, pin_mask1bit | tmp_val);
+		iowrite32be(pin_mask1bit | tmp_val, &par_io->cpodr);
 	else
-		out_be32(&par_io->cpodr, ~pin_mask1bit & tmp_val);
+		iowrite32be(~pin_mask1bit & tmp_val, &par_io->cpodr);
 
 	/* define direction */
 	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
-		in_be32(&par_io->cpdir2) :
-		in_be32(&par_io->cpdir1);
+		ioread32be(&par_io->cpdir2) :
+		ioread32be(&par_io->cpdir1);
 
 	/* get all bits mask for 2 bit per port */
 	pin_mask2bits = (u32) (0x3 << (QE_PIO_PINS -
@@ -82,34 +80,30 @@ void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir,
 
 	/* clear and set 2 bits mask */
 	if (pin > (QE_PIO_PINS / 2) - 1) {
-		out_be32(&par_io->cpdir2,
-			 ~pin_mask2bits & tmp_val);
+		iowrite32be(~pin_mask2bits & tmp_val, &par_io->cpdir2);
 		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io->cpdir2, new_mask2bits | tmp_val);
+		iowrite32be(new_mask2bits | tmp_val, &par_io->cpdir2);
 	} else {
-		out_be32(&par_io->cpdir1,
-			 ~pin_mask2bits & tmp_val);
+		iowrite32be(~pin_mask2bits & tmp_val, &par_io->cpdir1);
 		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io->cpdir1, new_mask2bits | tmp_val);
+		iowrite32be(new_mask2bits | tmp_val, &par_io->cpdir1);
 	}
 	/* define pin assignment */
 	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
-		in_be32(&par_io->cppar2) :
-		in_be32(&par_io->cppar1);
+		ioread32be(&par_io->cppar2) :
+		ioread32be(&par_io->cppar1);
 
 	new_mask2bits = (u32) (assignment << (QE_PIO_PINS -
 			(pin % (QE_PIO_PINS / 2) + 1) * 2));
 	/* clear and set 2 bits mask */
 	if (pin > (QE_PIO_PINS / 2) - 1) {
-		out_be32(&par_io->cppar2,
-			 ~pin_mask2bits & tmp_val);
+		iowrite32be(~pin_mask2bits & tmp_val, &par_io->cppar2);
 		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io->cppar2, new_mask2bits | tmp_val);
+		iowrite32be(new_mask2bits | tmp_val, &par_io->cppar2);
 	} else {
-		out_be32(&par_io->cppar1,
-			 ~pin_mask2bits & tmp_val);
+		iowrite32be(~pin_mask2bits & tmp_val, &par_io->cppar1);
 		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io->cppar1, new_mask2bits | tmp_val);
+		iowrite32be(new_mask2bits | tmp_val, &par_io->cppar1);
 	}
 }
 EXPORT_SYMBOL(__par_io_config_pin);
@@ -137,12 +131,12 @@ int par_io_data_set(u8 port, u8 pin, u8 val)
 	/* calculate pin location */
 	pin_mask = (u32) (1 << (QE_PIO_PINS - 1 - pin));
 
-	tmp_val = in_be32(&par_io[port].cpdata);
+	tmp_val = ioread32be(&par_io[port].cpdata);
 
 	if (val == 0)		/* clear */
-		out_be32(&par_io[port].cpdata, ~pin_mask & tmp_val);
+		iowrite32be(~pin_mask & tmp_val, &par_io[port].cpdata);
 	else			/* set */
-		out_be32(&par_io[port].cpdata, pin_mask | tmp_val);
+		iowrite32be(pin_mask | tmp_val, &par_io[port].cpdata);
 
 	return 0;
 }
diff --git a/drivers/soc/fsl/qe/qe_tdm.c b/drivers/soc/fsl/qe/qe_tdm.c
index a1048b4..818e679 100644
--- a/drivers/soc/fsl/qe/qe_tdm.c
+++ b/drivers/soc/fsl/qe/qe_tdm.c
@@ -227,10 +227,10 @@ void ucc_tdm_init(struct ucc_tdm *utdm, struct ucc_tdm_info *ut_info)
 				    &siram[siram_entry_id * 32 + 0x200 +  i]);
 	}
 
-	setbits16(&siram[(siram_entry_id * 32) + (utdm->num_of_ts - 1)],
-		  SIR_LAST);
-	setbits16(&siram[(siram_entry_id * 32) + 0x200 + (utdm->num_of_ts - 1)],
-		  SIR_LAST);
+	qe_setbits16(&siram[(siram_entry_id * 32) + (utdm->num_of_ts - 1)],
+		     SIR_LAST);
+	qe_setbits16(&siram[(siram_entry_id * 32) + 0x200 +
+		     (utdm->num_of_ts - 1)], SIR_LAST);
 
 	/* Set SIxMR register */
 	sixmr = SIMR_SAD(siram_entry_id);
diff --git a/drivers/soc/fsl/qe/ucc.c b/drivers/soc/fsl/qe/ucc.c
index c646d87..bc64b83 100644
--- a/drivers/soc/fsl/qe/ucc.c
+++ b/drivers/soc/fsl/qe/ucc.c
@@ -39,7 +39,7 @@ int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
 		return -EINVAL;
 
 	spin_lock_irqsave(&cmxgcr_lock, flags);
-	clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
+	qe_clrsetbits32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
 		ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
 	spin_unlock_irqrestore(&cmxgcr_lock, flags);
 
@@ -84,7 +84,7 @@ int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
 		return -EINVAL;
 	}
 
-	clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK,
+	qe_clrsetbits8(guemr, UCC_GUEMR_MODE_MASK,
 		UCC_GUEMR_SET_RESERVED3 | speed);
 
 	return 0;
@@ -113,9 +113,9 @@ int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
 	get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
 
 	if (set)
-		setbits32(cmxucr, mask << shift);
+		qe_setbits32(cmxucr, mask << shift);
 	else
-		clrbits32(cmxucr, mask << shift);
+		qe_clrbits32(cmxucr, mask << shift);
 
 	return 0;
 }
@@ -211,7 +211,7 @@ int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
 	if (mode == COMM_DIR_RX)
 		shift += 4;
 
-	clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
+	qe_clrsetbits32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
 		clock_bits << shift);
 
 	return 0;
diff --git a/drivers/soc/fsl/qe/ucc_fast.c b/drivers/soc/fsl/qe/ucc_fast.c
index 83d8d16..5115e93 100644
--- a/drivers/soc/fsl/qe/ucc_fast.c
+++ b/drivers/soc/fsl/qe/ucc_fast.c
@@ -33,41 +33,41 @@ void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
 	printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs);
 
 	printk(KERN_INFO "gumr  : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
+	       &uccf->uf_regs->gumr, ioread32be(&uccf->uf_regs->gumr));
 	printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
+		  &uccf->uf_regs->upsmr, ioread32be(&uccf->uf_regs->upsmr));
 	printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
+		  &uccf->uf_regs->utodr, ioread16be(&uccf->uf_regs->utodr));
 	printk(KERN_INFO "udsr  : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
+		  &uccf->uf_regs->udsr, ioread16be(&uccf->uf_regs->udsr));
 	printk(KERN_INFO "ucce  : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
+		  &uccf->uf_regs->ucce, ioread32be(&uccf->uf_regs->ucce));
 	printk(KERN_INFO "uccm  : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
+		  &uccf->uf_regs->uccm, ioread32be(&uccf->uf_regs->uccm));
 	printk(KERN_INFO "uccs  : addr=0x%p, val=0x%02x\n",
-		  &uccf->uf_regs->uccs, in_8(&uccf->uf_regs->uccs));
+		  &uccf->uf_regs->uccs, ioread8(&uccf->uf_regs->uccs));
 	printk(KERN_INFO "urfb  : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
+		  &uccf->uf_regs->urfb, ioread32be(&uccf->uf_regs->urfb));
 	printk(KERN_INFO "urfs  : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
+		  &uccf->uf_regs->urfs, ioread16be(&uccf->uf_regs->urfs));
 	printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
+		  &uccf->uf_regs->urfet, ioread16be(&uccf->uf_regs->urfet));
 	printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset));
+		  &uccf->uf_regs->urfset, ioread16be(&uccf->uf_regs->urfset));
 	printk(KERN_INFO "utfb  : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
+		  &uccf->uf_regs->utfb, ioread32be(&uccf->uf_regs->utfb));
 	printk(KERN_INFO "utfs  : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
+		  &uccf->uf_regs->utfs, ioread16be(&uccf->uf_regs->utfs));
 	printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
+		  &uccf->uf_regs->utfet, ioread16be(&uccf->uf_regs->utfet));
 	printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
+		  &uccf->uf_regs->utftt, ioread16be(&uccf->uf_regs->utftt));
 	printk(KERN_INFO "utpt  : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
+		  &uccf->uf_regs->utpt, ioread16be(&uccf->uf_regs->utpt));
 	printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
+		  &uccf->uf_regs->urtry, ioread32be(&uccf->uf_regs->urtry));
 	printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
-		  &uccf->uf_regs->guemr, in_8(&uccf->uf_regs->guemr));
+		  &uccf->uf_regs->guemr, ioread8(&uccf->uf_regs->guemr));
 }
 EXPORT_SYMBOL(ucc_fast_dump_regs);
 
@@ -89,7 +89,7 @@ EXPORT_SYMBOL(ucc_fast_get_qe_cr_subblock);
 
 void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf)
 {
-	out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
+	iowrite16be(UCC_FAST_TOD, &uccf->uf_regs->utodr);
 }
 EXPORT_SYMBOL(ucc_fast_transmit_on_demand);
 
@@ -101,7 +101,7 @@ void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
 	uf_regs = uccf->uf_regs;
 
 	/* Enable reception and/or transmission on this UCC. */
-	gumr = in_be32(&uf_regs->gumr);
+	gumr = ioread32be(&uf_regs->gumr);
 	if (mode & COMM_DIR_TX) {
 		gumr |= UCC_FAST_GUMR_ENT;
 		uccf->enabled_tx = 1;
@@ -110,7 +110,7 @@ void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
 		gumr |= UCC_FAST_GUMR_ENR;
 		uccf->enabled_rx = 1;
 	}
-	out_be32(&uf_regs->gumr, gumr);
+	iowrite32be(gumr, &uf_regs->gumr);
 }
 EXPORT_SYMBOL(ucc_fast_enable);
 
@@ -122,7 +122,7 @@ void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
 	uf_regs = uccf->uf_regs;
 
 	/* Disable reception and/or transmission on this UCC. */
-	gumr = in_be32(&uf_regs->gumr);
+	gumr = ioread32be(&uf_regs->gumr);
 	if (mode & COMM_DIR_TX) {
 		gumr &= ~UCC_FAST_GUMR_ENT;
 		uccf->enabled_tx = 0;
@@ -131,7 +131,7 @@ void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
 		gumr &= ~UCC_FAST_GUMR_ENR;
 		uccf->enabled_rx = 0;
 	}
-	out_be32(&uf_regs->gumr, gumr);
+	iowrite32be(gumr, &uf_regs->gumr);
 }
 EXPORT_SYMBOL(ucc_fast_disable);
 
@@ -263,12 +263,13 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	gumr |= uf_info->tenc;
 	gumr |= uf_info->tcrc;
 	gumr |= uf_info->mode;
-	out_be32(&uf_regs->gumr, gumr);
+	iowrite32be(gumr, &uf_regs->gumr);
 
 	/* Allocate memory for Tx Virtual Fifo */
 	uccf->ucc_fast_tx_virtual_fifo_base_offset =
 	    qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
-	if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
+	if (IS_ERR_VALUE((unsigned long)uccf->
+			 ucc_fast_tx_virtual_fifo_base_offset)) {
 		printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
 			__func__);
 		uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
@@ -281,7 +282,8 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 		qe_muram_alloc(uf_info->urfs +
 			   UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
 			   UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
-	if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
+	if (IS_ERR_VALUE((unsigned long)uccf->
+			 ucc_fast_rx_virtual_fifo_base_offset)) {
 		printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
 			__func__);
 		uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
@@ -290,15 +292,15 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	}
 
 	/* Set Virtual Fifo registers */
-	out_be16(&uf_regs->urfs, uf_info->urfs);
-	out_be16(&uf_regs->urfet, uf_info->urfet);
-	out_be16(&uf_regs->urfset, uf_info->urfset);
-	out_be16(&uf_regs->utfs, uf_info->utfs);
-	out_be16(&uf_regs->utfet, uf_info->utfet);
-	out_be16(&uf_regs->utftt, uf_info->utftt);
+	iowrite16be(uf_info->urfs, &uf_regs->urfs);
+	iowrite16be(uf_info->urfet, &uf_regs->urfet);
+	iowrite16be(uf_info->urfset, &uf_regs->urfset);
+	iowrite16be(uf_info->utfs, &uf_regs->utfs);
+	iowrite16be(uf_info->utfet, &uf_regs->utfet);
+	iowrite16be(uf_info->utftt, &uf_regs->utftt);
 	/* utfb, urfb are offsets from MURAM base */
-	out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset);
-	out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset);
+	iowrite32be(uccf->ucc_fast_tx_virtual_fifo_base_offset, &uf_regs->utfb);
+	iowrite32be(uccf->ucc_fast_rx_virtual_fifo_base_offset, &uf_regs->urfb);
 
 	/* Mux clocking */
 	/* Grant Support */
@@ -366,14 +368,14 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	}
 
 	/* Set interrupt mask register at UCC level. */
-	out_be32(&uf_regs->uccm, uf_info->uccm_mask);
+	iowrite32be(uf_info->uccm_mask, &uf_regs->uccm);
 
 	/* First, clear anything pending at UCC level,
 	 * otherwise, old garbage may come through
 	 * as soon as the dam is opened. */
 
 	/* Writing '1' clears */
-	out_be32(&uf_regs->ucce, 0xffffffff);
+	iowrite32be(0xffffffff, &uf_regs->ucce);
 
 	*uccf_ret = uccf;
 	return 0;
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index e9cf5b6..b02ae82 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1166,7 +1166,7 @@ config SERIAL_LANTIQ
 
 config SERIAL_QE
 	tristate "Freescale QUICC Engine serial port support"
-	depends on QUICC_ENGINE
+	depends on QUICC_ENGINE && FSL_SOC && PPC32
 	select SERIAL_CORE
 	select FW_LOADER
 	default n
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 481eb29..ee409fd 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -34,6 +34,7 @@
 #include <soc/fsl/qe/ucc_slow.h>
 
 #include <linux/firmware.h>
+#include <asm/cpm.h>
 #include <asm/reg.h>
 
 /*
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 658b8da..e18168c 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -277,7 +277,7 @@ config USB_AMD5536UDC
 
 config USB_FSL_QE
 	tristate "Freescale QE/CPM USB Device Controller"
-	depends on FSL_SOC && (QUICC_ENGINE || CPM)
+	depends on (FSL_SOC && QUICC_ENGINE && PPC32) || (FSL_SOC && CPM)
 	help
 	   Some of Freescale PowerPC processors have a Full Speed
 	   QE/CPM2 USB controller, which support device mode with 4
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 6361fc7..30f0548 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -639,7 +639,7 @@ config USB_UHCI_BIG_ENDIAN_DESC
 
 config USB_FHCI_HCD
 	tristate "Freescale QE USB Host Controller support"
-	depends on OF_GPIO && QE_GPIO && QUICC_ENGINE
+	depends on OF_GPIO && QE_GPIO && QUICC_ENGINE && FSL_SOC && PPC32
 	select FSL_GTM
 	select QE_USB
 	help
diff --git a/include/soc/fsl/qe/qe.h b/include/soc/fsl/qe/qe.h
index 70339d7..f7a14f2 100644
--- a/include/soc/fsl/qe/qe.h
+++ b/include/soc/fsl/qe/qe.h
@@ -21,7 +21,6 @@
 #include <linux/spinlock.h>
 #include <linux/errno.h>
 #include <linux/err.h>
-#include <asm/cpm.h>
 #include <soc/fsl/qe/immap_qe.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-- 
2.1.0.27.g96db324

[PATCH 4/8] irqchip/qeic: move qeic driver from drivers/soc/fsl/qe

[Zhao Qiang]

move the driver from drivers/soc/fsl/qe to drivers/irqchip,
merge qe_ic.h and qe_ic.c into irq-qeic.c.

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
---
 drivers/irqchip/Makefile    |   1 +
 drivers/irqchip/irq-qeic.c  | 601 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/soc/fsl/qe/Makefile |   2 +-
 drivers/soc/fsl/qe/qe_ic.c  | 512 -------------------------------------
 drivers/soc/fsl/qe/qe_ic.h  | 103 --------
 5 files changed, 603 insertions(+), 616 deletions(-)
 create mode 100644 drivers/irqchip/irq-qeic.c
 delete mode 100644 drivers/soc/fsl/qe/qe_ic.c
 delete mode 100644 drivers/soc/fsl/qe/qe_ic.h

diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 0e55d94..627c5d6 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -75,3 +75,4 @@ obj-$(CONFIG_LS_SCFG_MSI)		+= irq-ls-scfg-msi.o
 obj-$(CONFIG_EZNPS_GIC)			+= irq-eznps.o
 obj-$(CONFIG_ARCH_ASPEED)		+= irq-aspeed-vic.o
 obj-$(CONFIG_STM32_EXTI) 		+= irq-stm32-exti.o
+obj-$(CONFIG_QUICC_ENGINE)		+= irq-qeic.o
diff --git a/drivers/irqchip/irq-qeic.c b/drivers/irqchip/irq-qeic.c
new file mode 100644
index 0000000..48ceded
--- /dev/null
+++ b/drivers/irqchip/irq-qeic.c
@@ -0,0 +1,601 @@
+/*
+ * drivers/irqchip/irq-qeic.c
+ *
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.  All rights reserved.
+ *
+ * Author: Li Yang <leoli@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * QUICC ENGINE Interrupt Controller
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <soc/fsl/qe/qe_ic.h>
+
+#define NR_QE_IC_INTS		64
+
+/* QE IC registers offset */
+#define QEIC_CICR		0x00
+#define QEIC_CIVEC		0x04
+#define QEIC_CRIPNR		0x08
+#define QEIC_CIPNR		0x0c
+#define QEIC_CIPXCC		0x10
+#define QEIC_CIPYCC		0x14
+#define QEIC_CIPWCC		0x18
+#define QEIC_CIPZCC		0x1c
+#define QEIC_CIMR		0x20
+#define QEIC_CRIMR		0x24
+#define QEIC_CICNR		0x28
+#define QEIC_CIPRTA		0x30
+#define QEIC_CIPRTB		0x34
+#define QEIC_CRICR		0x3c
+#define QEIC_CHIVEC		0x60
+
+/* Interrupt priority registers */
+#define CIPCC_SHIFT_PRI0	29
+#define CIPCC_SHIFT_PRI1	26
+#define CIPCC_SHIFT_PRI2	23
+#define CIPCC_SHIFT_PRI3	20
+#define CIPCC_SHIFT_PRI4	13
+#define CIPCC_SHIFT_PRI5	10
+#define CIPCC_SHIFT_PRI6	7
+#define CIPCC_SHIFT_PRI7	4
+
+/* CICR priority modes */
+#define CICR_GWCC		0x00040000
+#define CICR_GXCC		0x00020000
+#define CICR_GYCC		0x00010000
+#define CICR_GZCC		0x00080000
+#define CICR_GRTA		0x00200000
+#define CICR_GRTB		0x00400000
+#define CICR_HPIT_SHIFT		8
+#define CICR_HPIT_MASK		0x00000300
+#define CICR_HP_SHIFT		24
+#define CICR_HP_MASK		0x3f000000
+
+/* CICNR */
+#define CICNR_WCC1T_SHIFT	20
+#define CICNR_ZCC1T_SHIFT	28
+#define CICNR_YCC1T_SHIFT	12
+#define CICNR_XCC1T_SHIFT	4
+
+/* CRICR */
+#define CRICR_RTA1T_SHIFT	20
+#define CRICR_RTB1T_SHIFT	28
+
+/* Signal indicator */
+#define SIGNAL_MASK		3
+#define SIGNAL_HIGH		2
+#define SIGNAL_LOW		0
+
+struct qe_ic {
+	/* Control registers offset */
+	volatile u32 __iomem *regs;
+
+	/* The remapper for this QEIC */
+	struct irq_domain *irqhost;
+
+	/* The "linux" controller struct */
+	struct irq_chip hc_irq;
+
+	/* VIRQ numbers of QE high/low irqs */
+	unsigned int virq_high;
+	unsigned int virq_low;
+};
+
+/*
+ * QE interrupt controller internal structure
+ */
+struct qe_ic_info {
+	/* location of this source at the QIMR register. */
+	u32	mask;
+
+	/* Mask register offset */
+	u32	mask_reg;
+
+	/*
+	 * for grouped interrupts sources - the interrupt
+	 * code as appears at the group priority register
+	 */
+	u8	pri_code;
+
+	/* Group priority register offset */
+	u32	pri_reg;
+};
+
+static DEFINE_RAW_SPINLOCK(qe_ic_lock);
+
+static struct qe_ic_info qe_ic_info[] = {
+	[1] = {
+	       .mask = 0x00008000,
+	       .mask_reg = QEIC_CIMR,
+	       .pri_code = 0,
+	       .pri_reg = QEIC_CIPWCC,
+	       },
+	[2] = {
+	       .mask = 0x00004000,
+	       .mask_reg = QEIC_CIMR,
+	       .pri_code = 1,
+	       .pri_reg = QEIC_CIPWCC,
+	       },
+	[3] = {
+	       .mask = 0x00002000,
+	       .mask_reg = QEIC_CIMR,
+	       .pri_code = 2,
+	       .pri_reg = QEIC_CIPWCC,
+	       },
+	[10] = {
+		.mask = 0x00000040,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 1,
+		.pri_reg = QEIC_CIPZCC,
+		},
+	[11] = {
+		.mask = 0x00000020,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 2,
+		.pri_reg = QEIC_CIPZCC,
+		},
+	[12] = {
+		.mask = 0x00000010,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 3,
+		.pri_reg = QEIC_CIPZCC,
+		},
+	[13] = {
+		.mask = 0x00000008,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 4,
+		.pri_reg = QEIC_CIPZCC,
+		},
+	[14] = {
+		.mask = 0x00000004,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 5,
+		.pri_reg = QEIC_CIPZCC,
+		},
+	[15] = {
+		.mask = 0x00000002,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 6,
+		.pri_reg = QEIC_CIPZCC,
+		},
+	[20] = {
+		.mask = 0x10000000,
+		.mask_reg = QEIC_CRIMR,
+		.pri_code = 3,
+		.pri_reg = QEIC_CIPRTA,
+		},
+	[25] = {
+		.mask = 0x00800000,
+		.mask_reg = QEIC_CRIMR,
+		.pri_code = 0,
+		.pri_reg = QEIC_CIPRTB,
+		},
+	[26] = {
+		.mask = 0x00400000,
+		.mask_reg = QEIC_CRIMR,
+		.pri_code = 1,
+		.pri_reg = QEIC_CIPRTB,
+		},
+	[27] = {
+		.mask = 0x00200000,
+		.mask_reg = QEIC_CRIMR,
+		.pri_code = 2,
+		.pri_reg = QEIC_CIPRTB,
+		},
+	[28] = {
+		.mask = 0x00100000,
+		.mask_reg = QEIC_CRIMR,
+		.pri_code = 3,
+		.pri_reg = QEIC_CIPRTB,
+		},
+	[32] = {
+		.mask = 0x80000000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 0,
+		.pri_reg = QEIC_CIPXCC,
+		},
+	[33] = {
+		.mask = 0x40000000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 1,
+		.pri_reg = QEIC_CIPXCC,
+		},
+	[34] = {
+		.mask = 0x20000000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 2,
+		.pri_reg = QEIC_CIPXCC,
+		},
+	[35] = {
+		.mask = 0x10000000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 3,
+		.pri_reg = QEIC_CIPXCC,
+		},
+	[36] = {
+		.mask = 0x08000000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 4,
+		.pri_reg = QEIC_CIPXCC,
+		},
+	[40] = {
+		.mask = 0x00800000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 0,
+		.pri_reg = QEIC_CIPYCC,
+		},
+	[41] = {
+		.mask = 0x00400000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 1,
+		.pri_reg = QEIC_CIPYCC,
+		},
+	[42] = {
+		.mask = 0x00200000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 2,
+		.pri_reg = QEIC_CIPYCC,
+		},
+	[43] = {
+		.mask = 0x00100000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 3,
+		.pri_reg = QEIC_CIPYCC,
+		},
+};
+
+static inline u32 qe_ic_read(volatile __be32  __iomem * base, unsigned int reg)
+{
+	return in_be32(base + (reg >> 2));
+}
+
+static inline void qe_ic_write(volatile __be32  __iomem * base, unsigned int reg,
+			       u32 value)
+{
+	out_be32(base + (reg >> 2), value);
+}
+
+static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
+{
+	return irq_get_chip_data(virq);
+}
+
+static inline struct qe_ic *qe_ic_from_irq_data(struct irq_data *d)
+{
+	return irq_data_get_irq_chip_data(d);
+}
+
+static void qe_ic_unmask_irq(struct irq_data *d)
+{
+	struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
+	unsigned int src = irqd_to_hwirq(d);
+	unsigned long flags;
+	u32 temp;
+
+	raw_spin_lock_irqsave(&qe_ic_lock, flags);
+
+	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+		    temp | qe_ic_info[src].mask);
+
+	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static void qe_ic_mask_irq(struct irq_data *d)
+{
+	struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
+	unsigned int src = irqd_to_hwirq(d);
+	unsigned long flags;
+	u32 temp;
+
+	raw_spin_lock_irqsave(&qe_ic_lock, flags);
+
+	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+		    temp & ~qe_ic_info[src].mask);
+
+	/* Flush the above write before enabling interrupts; otherwise,
+	 * spurious interrupts will sometimes happen.  To be 100% sure
+	 * that the write has reached the device before interrupts are
+	 * enabled, the mask register would have to be read back; however,
+	 * this is not required for correctness, only to avoid wasting
+	 * time on a large number of spurious interrupts.  In testing,
+	 * a sync reduced the observed spurious interrupts to zero.
+	 */
+	mb();
+
+	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static struct irq_chip qe_ic_irq_chip = {
+	.name = "QEIC",
+	.irq_unmask = qe_ic_unmask_irq,
+	.irq_mask = qe_ic_mask_irq,
+	.irq_mask_ack = qe_ic_mask_irq,
+};
+
+static int qe_ic_host_match(struct irq_domain *h, struct device_node *node,
+			    enum irq_domain_bus_token bus_token)
+{
+	/* Exact match, unless qe_ic node is NULL */
+	struct device_node *of_node = irq_domain_get_of_node(h);
+	return of_node == NULL || of_node == node;
+}
+
+static int qe_ic_host_map(struct irq_domain *h, unsigned int virq,
+			  irq_hw_number_t hw)
+{
+	struct qe_ic *qe_ic = h->host_data;
+	struct irq_chip *chip;
+
+	if (hw >= ARRAY_SIZE(qe_ic_info)) {
+		pr_err("%s: Invalid hw irq number for QEIC\n", __func__);
+		return -EINVAL;
+	}
+
+	if (qe_ic_info[hw].mask == 0) {
+		printk(KERN_ERR "Can't map reserved IRQ\n");
+		return -EINVAL;
+	}
+	/* Default chip */
+	chip = &qe_ic->hc_irq;
+
+	irq_set_chip_data(virq, qe_ic);
+	irq_set_status_flags(virq, IRQ_LEVEL);
+
+	irq_set_chip_and_handler(virq, chip, handle_level_irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops qe_ic_host_ops = {
+	.match = qe_ic_host_match,
+	.map = qe_ic_host_map,
+	.xlate = irq_domain_xlate_onetwocell,
+};
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
+{
+	int irq;
+
+	BUG_ON(qe_ic == NULL);
+
+	/* get the interrupt source vector. */
+	irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
+
+	if (irq == 0)
+		return NO_IRQ;
+
+	return irq_linear_revmap(qe_ic->irqhost, irq);
+}
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
+{
+	int irq;
+
+	BUG_ON(qe_ic == NULL);
+
+	/* get the interrupt source vector. */
+	irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
+
+	if (irq == 0)
+		return NO_IRQ;
+
+	return irq_linear_revmap(qe_ic->irqhost, irq);
+}
+
+void __init qe_ic_init(struct device_node *node, unsigned int flags,
+		       void (*low_handler)(struct irq_desc *desc),
+		       void (*high_handler)(struct irq_desc *desc))
+{
+	struct qe_ic *qe_ic;
+	struct resource res;
+	u32 temp = 0, ret, high_active = 0;
+
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret)
+		return;
+
+	qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
+	if (qe_ic == NULL)
+		return;
+
+	qe_ic->irqhost = irq_domain_add_linear(node, NR_QE_IC_INTS,
+					       &qe_ic_host_ops, qe_ic);
+	if (qe_ic->irqhost == NULL) {
+		kfree(qe_ic);
+		return;
+	}
+
+	qe_ic->regs = ioremap(res.start, resource_size(&res));
+
+	qe_ic->hc_irq = qe_ic_irq_chip;
+
+	qe_ic->virq_high = irq_of_parse_and_map(node, 0);
+	qe_ic->virq_low = irq_of_parse_and_map(node, 1);
+
+	if (qe_ic->virq_low == NO_IRQ) {
+		printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
+		kfree(qe_ic);
+		return;
+	}
+
+	/* default priority scheme is grouped. If spread mode is    */
+	/* required, configure cicr accordingly.                    */
+	if (flags & QE_IC_SPREADMODE_GRP_W)
+		temp |= CICR_GWCC;
+	if (flags & QE_IC_SPREADMODE_GRP_X)
+		temp |= CICR_GXCC;
+	if (flags & QE_IC_SPREADMODE_GRP_Y)
+		temp |= CICR_GYCC;
+	if (flags & QE_IC_SPREADMODE_GRP_Z)
+		temp |= CICR_GZCC;
+	if (flags & QE_IC_SPREADMODE_GRP_RISCA)
+		temp |= CICR_GRTA;
+	if (flags & QE_IC_SPREADMODE_GRP_RISCB)
+		temp |= CICR_GRTB;
+
+	/* choose destination signal for highest priority interrupt */
+	if (flags & QE_IC_HIGH_SIGNAL) {
+		temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT);
+		high_active = 1;
+	}
+
+	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
+
+	irq_set_handler_data(qe_ic->virq_low, qe_ic);
+	irq_set_chained_handler(qe_ic->virq_low, low_handler);
+
+	if (qe_ic->virq_high != NO_IRQ &&
+			qe_ic->virq_high != qe_ic->virq_low) {
+		irq_set_handler_data(qe_ic->virq_high, qe_ic);
+		irq_set_chained_handler(qe_ic->virq_high, high_handler);
+	}
+}
+
+void qe_ic_set_highest_priority(unsigned int virq, int high)
+{
+	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+	unsigned int src = virq_to_hw(virq);
+	u32 temp = 0;
+
+	temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
+
+	temp &= ~CICR_HP_MASK;
+	temp |= src << CICR_HP_SHIFT;
+
+	temp &= ~CICR_HPIT_MASK;
+	temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT;
+
+	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
+}
+
+/* Set Priority level within its group, from 1 to 8 */
+int qe_ic_set_priority(unsigned int virq, unsigned int priority)
+{
+	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+	unsigned int src = virq_to_hw(virq);
+	u32 temp;
+
+	if (priority > 8 || priority == 0)
+		return -EINVAL;
+	if (WARN_ONCE(src >= ARRAY_SIZE(qe_ic_info),
+		      "%s: Invalid hw irq number for QEIC\n", __func__))
+		return -EINVAL;
+	if (qe_ic_info[src].pri_reg == 0)
+		return -EINVAL;
+
+	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg);
+
+	if (priority < 4) {
+		temp &= ~(0x7 << (32 - priority * 3));
+		temp |= qe_ic_info[src].pri_code << (32 - priority * 3);
+	} else {
+		temp &= ~(0x7 << (24 - priority * 3));
+		temp |= qe_ic_info[src].pri_code << (24 - priority * 3);
+	}
+
+	qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp);
+
+	return 0;
+}
+
+/* Set a QE priority to use high irq, only priority 1~2 can use high irq */
+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
+{
+	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+	unsigned int src = virq_to_hw(virq);
+	u32 temp, control_reg = QEIC_CICNR, shift = 0;
+
+	if (priority > 2 || priority == 0)
+		return -EINVAL;
+	if (WARN_ONCE(src >= ARRAY_SIZE(qe_ic_info),
+		      "%s: Invalid hw irq number for QEIC\n", __func__))
+		return -EINVAL;
+
+	switch (qe_ic_info[src].pri_reg) {
+	case QEIC_CIPZCC:
+		shift = CICNR_ZCC1T_SHIFT;
+		break;
+	case QEIC_CIPWCC:
+		shift = CICNR_WCC1T_SHIFT;
+		break;
+	case QEIC_CIPYCC:
+		shift = CICNR_YCC1T_SHIFT;
+		break;
+	case QEIC_CIPXCC:
+		shift = CICNR_XCC1T_SHIFT;
+		break;
+	case QEIC_CIPRTA:
+		shift = CRICR_RTA1T_SHIFT;
+		control_reg = QEIC_CRICR;
+		break;
+	case QEIC_CIPRTB:
+		shift = CRICR_RTB1T_SHIFT;
+		control_reg = QEIC_CRICR;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	shift += (2 - priority) * 2;
+	temp = qe_ic_read(qe_ic->regs, control_reg);
+	temp &= ~(SIGNAL_MASK << shift);
+	temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift;
+	qe_ic_write(qe_ic->regs, control_reg, temp);
+
+	return 0;
+}
+
+static struct bus_type qe_ic_subsys = {
+	.name = "qe_ic",
+	.dev_name = "qe_ic",
+};
+
+static struct device device_qe_ic = {
+	.id = 0,
+	.bus = &qe_ic_subsys,
+};
+
+static int __init init_qe_ic_sysfs(void)
+{
+	int rc;
+
+	printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
+
+	rc = subsys_system_register(&qe_ic_subsys, NULL);
+	if (rc) {
+		printk(KERN_ERR "Failed registering qe_ic sys class\n");
+		return -ENODEV;
+	}
+	rc = device_register(&device_qe_ic);
+	if (rc) {
+		printk(KERN_ERR "Failed registering qe_ic sys device\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+subsys_initcall(init_qe_ic_sysfs);
diff --git a/drivers/soc/fsl/qe/Makefile b/drivers/soc/fsl/qe/Makefile
index 2031d38..51e4726 100644
--- a/drivers/soc/fsl/qe/Makefile
+++ b/drivers/soc/fsl/qe/Makefile
@@ -1,7 +1,7 @@
 #
 # Makefile for the linux ppc-specific parts of QE
 #
-obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_common.o qe_ic.o qe_io.o
+obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_common.o qe_io.o
 obj-$(CONFIG_CPM)	+= qe_common.o
 obj-$(CONFIG_UCC)	+= ucc.o
 obj-$(CONFIG_UCC_SLOW)	+= ucc_slow.o
diff --git a/drivers/soc/fsl/qe/qe_ic.c b/drivers/soc/fsl/qe/qe_ic.c
deleted file mode 100644
index ec2ca86..0000000
--- a/drivers/soc/fsl/qe/qe_ic.c
+++ /dev/null
@@ -1,512 +0,0 @@
-/*
- * arch/powerpc/sysdev/qe_lib/qe_ic.c
- *
- * Copyright (C) 2006 Freescale Semiconductor, Inc.  All rights reserved.
- *
- * Author: Li Yang <leoli@freescale.com>
- * Based on code from Shlomi Gridish <gridish@freescale.com>
- *
- * QUICC ENGINE Interrupt Controller
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/slab.h>
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/device.h>
-#include <linux/spinlock.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <soc/fsl/qe/qe_ic.h>
-
-#include "qe_ic.h"
-
-static DEFINE_RAW_SPINLOCK(qe_ic_lock);
-
-static struct qe_ic_info qe_ic_info[] = {
-	[1] = {
-	       .mask = 0x00008000,
-	       .mask_reg = QEIC_CIMR,
-	       .pri_code = 0,
-	       .pri_reg = QEIC_CIPWCC,
-	       },
-	[2] = {
-	       .mask = 0x00004000,
-	       .mask_reg = QEIC_CIMR,
-	       .pri_code = 1,
-	       .pri_reg = QEIC_CIPWCC,
-	       },
-	[3] = {
-	       .mask = 0x00002000,
-	       .mask_reg = QEIC_CIMR,
-	       .pri_code = 2,
-	       .pri_reg = QEIC_CIPWCC,
-	       },
-	[10] = {
-		.mask = 0x00000040,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 1,
-		.pri_reg = QEIC_CIPZCC,
-		},
-	[11] = {
-		.mask = 0x00000020,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 2,
-		.pri_reg = QEIC_CIPZCC,
-		},
-	[12] = {
-		.mask = 0x00000010,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 3,
-		.pri_reg = QEIC_CIPZCC,
-		},
-	[13] = {
-		.mask = 0x00000008,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 4,
-		.pri_reg = QEIC_CIPZCC,
-		},
-	[14] = {
-		.mask = 0x00000004,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 5,
-		.pri_reg = QEIC_CIPZCC,
-		},
-	[15] = {
-		.mask = 0x00000002,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 6,
-		.pri_reg = QEIC_CIPZCC,
-		},
-	[20] = {
-		.mask = 0x10000000,
-		.mask_reg = QEIC_CRIMR,
-		.pri_code = 3,
-		.pri_reg = QEIC_CIPRTA,
-		},
-	[25] = {
-		.mask = 0x00800000,
-		.mask_reg = QEIC_CRIMR,
-		.pri_code = 0,
-		.pri_reg = QEIC_CIPRTB,
-		},
-	[26] = {
-		.mask = 0x00400000,
-		.mask_reg = QEIC_CRIMR,
-		.pri_code = 1,
-		.pri_reg = QEIC_CIPRTB,
-		},
-	[27] = {
-		.mask = 0x00200000,
-		.mask_reg = QEIC_CRIMR,
-		.pri_code = 2,
-		.pri_reg = QEIC_CIPRTB,
-		},
-	[28] = {
-		.mask = 0x00100000,
-		.mask_reg = QEIC_CRIMR,
-		.pri_code = 3,
-		.pri_reg = QEIC_CIPRTB,
-		},
-	[32] = {
-		.mask = 0x80000000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 0,
-		.pri_reg = QEIC_CIPXCC,
-		},
-	[33] = {
-		.mask = 0x40000000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 1,
-		.pri_reg = QEIC_CIPXCC,
-		},
-	[34] = {
-		.mask = 0x20000000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 2,
-		.pri_reg = QEIC_CIPXCC,
-		},
-	[35] = {
-		.mask = 0x10000000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 3,
-		.pri_reg = QEIC_CIPXCC,
-		},
-	[36] = {
-		.mask = 0x08000000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 4,
-		.pri_reg = QEIC_CIPXCC,
-		},
-	[40] = {
-		.mask = 0x00800000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 0,
-		.pri_reg = QEIC_CIPYCC,
-		},
-	[41] = {
-		.mask = 0x00400000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 1,
-		.pri_reg = QEIC_CIPYCC,
-		},
-	[42] = {
-		.mask = 0x00200000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 2,
-		.pri_reg = QEIC_CIPYCC,
-		},
-	[43] = {
-		.mask = 0x00100000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 3,
-		.pri_reg = QEIC_CIPYCC,
-		},
-};
-
-static inline u32 qe_ic_read(volatile __be32  __iomem * base, unsigned int reg)
-{
-	return in_be32(base + (reg >> 2));
-}
-
-static inline void qe_ic_write(volatile __be32  __iomem * base, unsigned int reg,
-			       u32 value)
-{
-	out_be32(base + (reg >> 2), value);
-}
-
-static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
-{
-	return irq_get_chip_data(virq);
-}
-
-static inline struct qe_ic *qe_ic_from_irq_data(struct irq_data *d)
-{
-	return irq_data_get_irq_chip_data(d);
-}
-
-static void qe_ic_unmask_irq(struct irq_data *d)
-{
-	struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
-	unsigned int src = irqd_to_hwirq(d);
-	unsigned long flags;
-	u32 temp;
-
-	raw_spin_lock_irqsave(&qe_ic_lock, flags);
-
-	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
-	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
-		    temp | qe_ic_info[src].mask);
-
-	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
-}
-
-static void qe_ic_mask_irq(struct irq_data *d)
-{
-	struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
-	unsigned int src = irqd_to_hwirq(d);
-	unsigned long flags;
-	u32 temp;
-
-	raw_spin_lock_irqsave(&qe_ic_lock, flags);
-
-	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
-	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
-		    temp & ~qe_ic_info[src].mask);
-
-	/* Flush the above write before enabling interrupts; otherwise,
-	 * spurious interrupts will sometimes happen.  To be 100% sure
-	 * that the write has reached the device before interrupts are
-	 * enabled, the mask register would have to be read back; however,
-	 * this is not required for correctness, only to avoid wasting
-	 * time on a large number of spurious interrupts.  In testing,
-	 * a sync reduced the observed spurious interrupts to zero.
-	 */
-	mb();
-
-	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
-}
-
-static struct irq_chip qe_ic_irq_chip = {
-	.name = "QEIC",
-	.irq_unmask = qe_ic_unmask_irq,
-	.irq_mask = qe_ic_mask_irq,
-	.irq_mask_ack = qe_ic_mask_irq,
-};
-
-static int qe_ic_host_match(struct irq_domain *h, struct device_node *node,
-			    enum irq_domain_bus_token bus_token)
-{
-	/* Exact match, unless qe_ic node is NULL */
-	struct device_node *of_node = irq_domain_get_of_node(h);
-	return of_node == NULL || of_node == node;
-}
-
-static int qe_ic_host_map(struct irq_domain *h, unsigned int virq,
-			  irq_hw_number_t hw)
-{
-	struct qe_ic *qe_ic = h->host_data;
-	struct irq_chip *chip;
-
-	if (hw >= ARRAY_SIZE(qe_ic_info)) {
-		pr_err("%s: Invalid hw irq number for QEIC\n", __func__);
-		return -EINVAL;
-	}
-
-	if (qe_ic_info[hw].mask == 0) {
-		printk(KERN_ERR "Can't map reserved IRQ\n");
-		return -EINVAL;
-	}
-	/* Default chip */
-	chip = &qe_ic->hc_irq;
-
-	irq_set_chip_data(virq, qe_ic);
-	irq_set_status_flags(virq, IRQ_LEVEL);
-
-	irq_set_chip_and_handler(virq, chip, handle_level_irq);
-
-	return 0;
-}
-
-static const struct irq_domain_ops qe_ic_host_ops = {
-	.match = qe_ic_host_match,
-	.map = qe_ic_host_map,
-	.xlate = irq_domain_xlate_onetwocell,
-};
-
-/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
-unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
-{
-	int irq;
-
-	BUG_ON(qe_ic == NULL);
-
-	/* get the interrupt source vector. */
-	irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
-
-	if (irq == 0)
-		return NO_IRQ;
-
-	return irq_linear_revmap(qe_ic->irqhost, irq);
-}
-
-/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
-unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
-{
-	int irq;
-
-	BUG_ON(qe_ic == NULL);
-
-	/* get the interrupt source vector. */
-	irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
-
-	if (irq == 0)
-		return NO_IRQ;
-
-	return irq_linear_revmap(qe_ic->irqhost, irq);
-}
-
-void __init qe_ic_init(struct device_node *node, unsigned int flags,
-		       void (*low_handler)(struct irq_desc *desc),
-		       void (*high_handler)(struct irq_desc *desc))
-{
-	struct qe_ic *qe_ic;
-	struct resource res;
-	u32 temp = 0, ret, high_active = 0;
-
-	ret = of_address_to_resource(node, 0, &res);
-	if (ret)
-		return;
-
-	qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
-	if (qe_ic == NULL)
-		return;
-
-	qe_ic->irqhost = irq_domain_add_linear(node, NR_QE_IC_INTS,
-					       &qe_ic_host_ops, qe_ic);
-	if (qe_ic->irqhost == NULL) {
-		kfree(qe_ic);
-		return;
-	}
-
-	qe_ic->regs = ioremap(res.start, resource_size(&res));
-
-	qe_ic->hc_irq = qe_ic_irq_chip;
-
-	qe_ic->virq_high = irq_of_parse_and_map(node, 0);
-	qe_ic->virq_low = irq_of_parse_and_map(node, 1);
-
-	if (qe_ic->virq_low == NO_IRQ) {
-		printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
-		kfree(qe_ic);
-		return;
-	}
-
-	/* default priority scheme is grouped. If spread mode is    */
-	/* required, configure cicr accordingly.                    */
-	if (flags & QE_IC_SPREADMODE_GRP_W)
-		temp |= CICR_GWCC;
-	if (flags & QE_IC_SPREADMODE_GRP_X)
-		temp |= CICR_GXCC;
-	if (flags & QE_IC_SPREADMODE_GRP_Y)
-		temp |= CICR_GYCC;
-	if (flags & QE_IC_SPREADMODE_GRP_Z)
-		temp |= CICR_GZCC;
-	if (flags & QE_IC_SPREADMODE_GRP_RISCA)
-		temp |= CICR_GRTA;
-	if (flags & QE_IC_SPREADMODE_GRP_RISCB)
-		temp |= CICR_GRTB;
-
-	/* choose destination signal for highest priority interrupt */
-	if (flags & QE_IC_HIGH_SIGNAL) {
-		temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT);
-		high_active = 1;
-	}
-
-	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
-
-	irq_set_handler_data(qe_ic->virq_low, qe_ic);
-	irq_set_chained_handler(qe_ic->virq_low, low_handler);
-
-	if (qe_ic->virq_high != NO_IRQ &&
-			qe_ic->virq_high != qe_ic->virq_low) {
-		irq_set_handler_data(qe_ic->virq_high, qe_ic);
-		irq_set_chained_handler(qe_ic->virq_high, high_handler);
-	}
-}
-
-void qe_ic_set_highest_priority(unsigned int virq, int high)
-{
-	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
-	unsigned int src = virq_to_hw(virq);
-	u32 temp = 0;
-
-	temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
-
-	temp &= ~CICR_HP_MASK;
-	temp |= src << CICR_HP_SHIFT;
-
-	temp &= ~CICR_HPIT_MASK;
-	temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT;
-
-	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
-}
-
-/* Set Priority level within its group, from 1 to 8 */
-int qe_ic_set_priority(unsigned int virq, unsigned int priority)
-{
-	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
-	unsigned int src = virq_to_hw(virq);
-	u32 temp;
-
-	if (priority > 8 || priority == 0)
-		return -EINVAL;
-	if (WARN_ONCE(src >= ARRAY_SIZE(qe_ic_info),
-		      "%s: Invalid hw irq number for QEIC\n", __func__))
-		return -EINVAL;
-	if (qe_ic_info[src].pri_reg == 0)
-		return -EINVAL;
-
-	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg);
-
-	if (priority < 4) {
-		temp &= ~(0x7 << (32 - priority * 3));
-		temp |= qe_ic_info[src].pri_code << (32 - priority * 3);
-	} else {
-		temp &= ~(0x7 << (24 - priority * 3));
-		temp |= qe_ic_info[src].pri_code << (24 - priority * 3);
-	}
-
-	qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp);
-
-	return 0;
-}
-
-/* Set a QE priority to use high irq, only priority 1~2 can use high irq */
-int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
-{
-	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
-	unsigned int src = virq_to_hw(virq);
-	u32 temp, control_reg = QEIC_CICNR, shift = 0;
-
-	if (priority > 2 || priority == 0)
-		return -EINVAL;
-	if (WARN_ONCE(src >= ARRAY_SIZE(qe_ic_info),
-		      "%s: Invalid hw irq number for QEIC\n", __func__))
-		return -EINVAL;
-
-	switch (qe_ic_info[src].pri_reg) {
-	case QEIC_CIPZCC:
-		shift = CICNR_ZCC1T_SHIFT;
-		break;
-	case QEIC_CIPWCC:
-		shift = CICNR_WCC1T_SHIFT;
-		break;
-	case QEIC_CIPYCC:
-		shift = CICNR_YCC1T_SHIFT;
-		break;
-	case QEIC_CIPXCC:
-		shift = CICNR_XCC1T_SHIFT;
-		break;
-	case QEIC_CIPRTA:
-		shift = CRICR_RTA1T_SHIFT;
-		control_reg = QEIC_CRICR;
-		break;
-	case QEIC_CIPRTB:
-		shift = CRICR_RTB1T_SHIFT;
-		control_reg = QEIC_CRICR;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	shift += (2 - priority) * 2;
-	temp = qe_ic_read(qe_ic->regs, control_reg);
-	temp &= ~(SIGNAL_MASK << shift);
-	temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift;
-	qe_ic_write(qe_ic->regs, control_reg, temp);
-
-	return 0;
-}
-
-static struct bus_type qe_ic_subsys = {
-	.name = "qe_ic",
-	.dev_name = "qe_ic",
-};
-
-static struct device device_qe_ic = {
-	.id = 0,
-	.bus = &qe_ic_subsys,
-};
-
-static int __init init_qe_ic_sysfs(void)
-{
-	int rc;
-
-	printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
-
-	rc = subsys_system_register(&qe_ic_subsys, NULL);
-	if (rc) {
-		printk(KERN_ERR "Failed registering qe_ic sys class\n");
-		return -ENODEV;
-	}
-	rc = device_register(&device_qe_ic);
-	if (rc) {
-		printk(KERN_ERR "Failed registering qe_ic sys device\n");
-		return -ENODEV;
-	}
-	return 0;
-}
-
-subsys_initcall(init_qe_ic_sysfs);
diff --git a/drivers/soc/fsl/qe/qe_ic.h b/drivers/soc/fsl/qe/qe_ic.h
deleted file mode 100644
index 926a2ed..0000000
--- a/drivers/soc/fsl/qe/qe_ic.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * drivers/soc/fsl/qe/qe_ic.h
- *
- * QUICC ENGINE Interrupt Controller Header
- *
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Author: Li Yang <leoli@freescale.com>
- * Based on code from Shlomi Gridish <gridish@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _POWERPC_SYSDEV_QE_IC_H
-#define _POWERPC_SYSDEV_QE_IC_H
-
-#include <soc/fsl/qe/qe_ic.h>
-
-#define NR_QE_IC_INTS		64
-
-/* QE IC registers offset */
-#define QEIC_CICR		0x00
-#define QEIC_CIVEC		0x04
-#define QEIC_CRIPNR		0x08
-#define QEIC_CIPNR		0x0c
-#define QEIC_CIPXCC		0x10
-#define QEIC_CIPYCC		0x14
-#define QEIC_CIPWCC		0x18
-#define QEIC_CIPZCC		0x1c
-#define QEIC_CIMR		0x20
-#define QEIC_CRIMR		0x24
-#define QEIC_CICNR		0x28
-#define QEIC_CIPRTA		0x30
-#define QEIC_CIPRTB		0x34
-#define QEIC_CRICR		0x3c
-#define QEIC_CHIVEC		0x60
-
-/* Interrupt priority registers */
-#define CIPCC_SHIFT_PRI0	29
-#define CIPCC_SHIFT_PRI1	26
-#define CIPCC_SHIFT_PRI2	23
-#define CIPCC_SHIFT_PRI3	20
-#define CIPCC_SHIFT_PRI4	13
-#define CIPCC_SHIFT_PRI5	10
-#define CIPCC_SHIFT_PRI6	7
-#define CIPCC_SHIFT_PRI7	4
-
-/* CICR priority modes */
-#define CICR_GWCC		0x00040000
-#define CICR_GXCC		0x00020000
-#define CICR_GYCC		0x00010000
-#define CICR_GZCC		0x00080000
-#define CICR_GRTA		0x00200000
-#define CICR_GRTB		0x00400000
-#define CICR_HPIT_SHIFT		8
-#define CICR_HPIT_MASK		0x00000300
-#define CICR_HP_SHIFT		24
-#define CICR_HP_MASK		0x3f000000
-
-/* CICNR */
-#define CICNR_WCC1T_SHIFT	20
-#define CICNR_ZCC1T_SHIFT	28
-#define CICNR_YCC1T_SHIFT	12
-#define CICNR_XCC1T_SHIFT	4
-
-/* CRICR */
-#define CRICR_RTA1T_SHIFT	20
-#define CRICR_RTB1T_SHIFT	28
-
-/* Signal indicator */
-#define SIGNAL_MASK		3
-#define SIGNAL_HIGH		2
-#define SIGNAL_LOW		0
-
-struct qe_ic {
-	/* Control registers offset */
-	volatile u32 __iomem *regs;
-
-	/* The remapper for this QEIC */
-	struct irq_domain *irqhost;
-
-	/* The "linux" controller struct */
-	struct irq_chip hc_irq;
-
-	/* VIRQ numbers of QE high/low irqs */
-	unsigned int virq_high;
-	unsigned int virq_low;
-};
-
-/*
- * QE interrupt controller internal structure
- */
-struct qe_ic_info {
-	u32	mask;	  /* location of this source at the QIMR register. */
-	u32	mask_reg; /* Mask register offset */
-	u8	pri_code; /* for grouped interrupts sources - the interrupt
-			     code as appears at the group priority register */
-	u32	pri_reg;  /* Group priority register offset */
-};
-
-#endif /* _POWERPC_SYSDEV_QE_IC_H */
-- 
2.1.0.27.g96db324

Re: [PATCH 4/8] irqchip/qeic: move qeic driver from drivers/soc/fsl/qe

[Marc Zyngier]

On 01/11/17 01:34, Zhao Qiang wrote:
> move the driver from drivers/soc/fsl/qe to drivers/irqchip,
> merge qe_ic.h and qe_ic.c into irq-qeic.c.
> 
> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
> ---
>  drivers/irqchip/Makefile    |   1 +
>  drivers/irqchip/irq-qeic.c  | 601 ++++++++++++++++++++++++++++++++++++++++++++
>  drivers/soc/fsl/qe/Makefile |   2 +-
>  drivers/soc/fsl/qe/qe_ic.c  | 512 -------------------------------------
>  drivers/soc/fsl/qe/qe_ic.h  | 103 --------
>  5 files changed, 603 insertions(+), 616 deletions(-)
>  create mode 100644 drivers/irqchip/irq-qeic.c
>  delete mode 100644 drivers/soc/fsl/qe/qe_ic.c
>  delete mode 100644 drivers/soc/fsl/qe/qe_ic.h

So that's where this is hiding. Next time, please send one consistent
series, not something that is spanned across two series with no
indication of the dependency.

> 
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 0e55d94..627c5d6 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -75,3 +75,4 @@ obj-$(CONFIG_LS_SCFG_MSI)		+= irq-ls-scfg-msi.o
>  obj-$(CONFIG_EZNPS_GIC)			+= irq-eznps.o
>  obj-$(CONFIG_ARCH_ASPEED)		+= irq-aspeed-vic.o
>  obj-$(CONFIG_STM32_EXTI) 		+= irq-stm32-exti.o
> +obj-$(CONFIG_QUICC_ENGINE)		+= irq-qeic.o
> diff --git a/drivers/irqchip/irq-qeic.c b/drivers/irqchip/irq-qeic.c
> new file mode 100644
> index 0000000..48ceded
> --- /dev/null
> +++ b/drivers/irqchip/irq-qeic.c
> @@ -0,0 +1,601 @@
> +/*
> + * drivers/irqchip/irq-qeic.c
> + *
> + * Copyright (C) 2016 Freescale Semiconductor, Inc.  All rights reserved.
> + *
> + * Author: Li Yang <leoli@freescale.com>
> + * Based on code from Shlomi Gridish <gridish@freescale.com>
> + *
> + * QUICC ENGINE Interrupt Controller
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/of_irq.h>
> +#include <linux/of_address.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/errno.h>
> +#include <linux/reboot.h>
> +#include <linux/slab.h>
> +#include <linux/stddef.h>
> +#include <linux/sched.h>
> +#include <linux/signal.h>
> +#include <linux/device.h>
> +#include <linux/spinlock.h>
> +#include <asm/irq.h>
> +#include <asm/io.h>
> +#include <soc/fsl/qe/qe_ic.h>
> +
> +#define NR_QE_IC_INTS		64
> +
> +/* QE IC registers offset */
> +#define QEIC_CICR		0x00
> +#define QEIC_CIVEC		0x04
> +#define QEIC_CRIPNR		0x08
> +#define QEIC_CIPNR		0x0c
> +#define QEIC_CIPXCC		0x10
> +#define QEIC_CIPYCC		0x14
> +#define QEIC_CIPWCC		0x18
> +#define QEIC_CIPZCC		0x1c
> +#define QEIC_CIMR		0x20
> +#define QEIC_CRIMR		0x24
> +#define QEIC_CICNR		0x28
> +#define QEIC_CIPRTA		0x30
> +#define QEIC_CIPRTB		0x34
> +#define QEIC_CRICR		0x3c
> +#define QEIC_CHIVEC		0x60
> +
> +/* Interrupt priority registers */
> +#define CIPCC_SHIFT_PRI0	29
> +#define CIPCC_SHIFT_PRI1	26
> +#define CIPCC_SHIFT_PRI2	23
> +#define CIPCC_SHIFT_PRI3	20
> +#define CIPCC_SHIFT_PRI4	13
> +#define CIPCC_SHIFT_PRI5	10
> +#define CIPCC_SHIFT_PRI6	7
> +#define CIPCC_SHIFT_PRI7	4
> +
> +/* CICR priority modes */
> +#define CICR_GWCC		0x00040000
> +#define CICR_GXCC		0x00020000
> +#define CICR_GYCC		0x00010000
> +#define CICR_GZCC		0x00080000
> +#define CICR_GRTA		0x00200000
> +#define CICR_GRTB		0x00400000
> +#define CICR_HPIT_SHIFT		8
> +#define CICR_HPIT_MASK		0x00000300
> +#define CICR_HP_SHIFT		24
> +#define CICR_HP_MASK		0x3f000000
> +
> +/* CICNR */
> +#define CICNR_WCC1T_SHIFT	20
> +#define CICNR_ZCC1T_SHIFT	28
> +#define CICNR_YCC1T_SHIFT	12
> +#define CICNR_XCC1T_SHIFT	4
> +
> +/* CRICR */
> +#define CRICR_RTA1T_SHIFT	20
> +#define CRICR_RTB1T_SHIFT	28
> +
> +/* Signal indicator */
> +#define SIGNAL_MASK		3
> +#define SIGNAL_HIGH		2
> +#define SIGNAL_LOW		0
> +
> +struct qe_ic {
> +	/* Control registers offset */
> +	volatile u32 __iomem *regs;
> +
> +	/* The remapper for this QEIC */
> +	struct irq_domain *irqhost;
> +
> +	/* The "linux" controller struct */
> +	struct irq_chip hc_irq;
> +
> +	/* VIRQ numbers of QE high/low irqs */
> +	unsigned int virq_high;
> +	unsigned int virq_low;
> +};
> +
> +/*
> + * QE interrupt controller internal structure
> + */
> +struct qe_ic_info {
> +	/* location of this source at the QIMR register. */
> +	u32	mask;
> +
> +	/* Mask register offset */
> +	u32	mask_reg;
> +
> +	/*
> +	 * for grouped interrupts sources - the interrupt
> +	 * code as appears at the group priority register
> +	 */
> +	u8	pri_code;
> +
> +	/* Group priority register offset */
> +	u32	pri_reg;
> +};
> +
> +static DEFINE_RAW_SPINLOCK(qe_ic_lock);
> +
> +static struct qe_ic_info qe_ic_info[] = {
> +	[1] = {
> +	       .mask = 0x00008000,

Please write those single-bit constants as BIT(x), as it makes the code
much more readable.

	M.
-- 
Jazz is not dead. It just smells funny...

Re: [PATCH 3/8] QE: remove PPCisms for QE

[Marc Zyngier]

On 01/11/17 01:34, Zhao Qiang wrote:
> QE was supported on PowerPC, and dependent on PPC,
> Now it is supported on other platforms. so remove PPCisms.
> 
> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
That's the same (wrong) patch. See my reply to 4/4 in your other series.

	M.
-- 
Jazz is not dead. It just smells funny...

Re: [PATCH 1/8] ls1043ardb: add qe node to ls1043ardb

[Marc Zyngier]

On 01/11/17 01:34, Zhao Qiang wrote:
> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 16 ++++++
>  arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi    | 66 +++++++++++++++++++++++
>  2 files changed, 82 insertions(+)

This patch needs to gain a commit log, and be sent (together with the
following one) to armsoc, as they deal with the platform DT files.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

RE: [PATCH 1/8] ls1043ardb: add qe node to ls1043ardb

[Qiang Zhao]

On 03/11/17 07:07, Marc Zyngier wrote:

> -----Original Message-----
> From: Marc Zyngier [mailto:marc.zyngier@arm.com]
> Sent: Friday, November 03, 2017 7:07 PM
> To: Qiang Zhao <qiang.zhao@nxp.com>; tglx@linutronix.de;
> jason@lakedaemon.net
> Cc: linux-kernel@vger.kernel.org
> Subject: Re: [PATCH 1/8] ls1043ardb: add qe node to ls1043ardb
> 
> On 01/11/17 01:34, Zhao Qiang wrote:
> > Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
> > ---
> >  arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 16 ++++++
> >  arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi    | 66
> +++++++++++++++++++++++
> >  2 files changed, 82 insertions(+)
> 
> This patch needs to gain a commit log, and be sent (together with the following
> one) to armsoc, as they deal with the platform DT files.
> 

Sorry, This patchset has been superseded.

Best Regards
Qiang Zhao