From: Samuel Mendoza-Jonas <sam@mendozajonas.com>
To: netdev@vger.kernel.org
Cc: Samuel Mendoza-Jonas <sam@mendozajonas.com>,
"David S . Miller" <davem@davemloft.net>,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next 2/2] net/ncsi: Don't return error on normal response
Date: Wed, 8 Nov 2017 16:30:45 +1100 [thread overview]
Message-ID: <20171108053045.1961-2-sam@mendozajonas.com> (raw)
In-Reply-To: <20171108053045.1961-1-sam@mendozajonas.com>
Several response handlers return EBUSY if the data corresponding to the
command/response pair is already set. There is no reason to return an
error here; the channel is advertising something as enabled because we
told it to enable it, and it's possible that the feature has been
enabled previously.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
---
net/ncsi/ncsi-rsp.c | 31 ++++++++++++++-----------------
1 file changed, 14 insertions(+), 17 deletions(-)
diff --git a/net/ncsi/ncsi-rsp.c b/net/ncsi/ncsi-rsp.c
index 58186c4102f0..efd933ff5570 100644
--- a/net/ncsi/ncsi-rsp.c
+++ b/net/ncsi/ncsi-rsp.c
@@ -146,7 +146,7 @@ static int ncsi_rsp_handler_ec(struct ncsi_request *nr)
ncm = &nc->modes[NCSI_MODE_ENABLE];
if (ncm->enable)
- return -EBUSY;
+ return 0;
ncm->enable = 1;
return 0;
@@ -173,7 +173,7 @@ static int ncsi_rsp_handler_dc(struct ncsi_request *nr)
ncm = &nc->modes[NCSI_MODE_ENABLE];
if (!ncm->enable)
- return -EBUSY;
+ return 0;
ncm->enable = 0;
return 0;
@@ -217,7 +217,7 @@ static int ncsi_rsp_handler_ecnt(struct ncsi_request *nr)
ncm = &nc->modes[NCSI_MODE_TX_ENABLE];
if (ncm->enable)
- return -EBUSY;
+ return 0;
ncm->enable = 1;
return 0;
@@ -239,7 +239,7 @@ static int ncsi_rsp_handler_dcnt(struct ncsi_request *nr)
ncm = &nc->modes[NCSI_MODE_TX_ENABLE];
if (!ncm->enable)
- return -EBUSY;
+ return 0;
ncm->enable = 1;
return 0;
@@ -263,7 +263,7 @@ static int ncsi_rsp_handler_ae(struct ncsi_request *nr)
/* Check if the AEN has been enabled */
ncm = &nc->modes[NCSI_MODE_AEN];
if (ncm->enable)
- return -EBUSY;
+ return 0;
/* Update to AEN configuration */
cmd = (struct ncsi_cmd_ae_pkt *)skb_network_header(nr->cmd);
@@ -382,7 +382,7 @@ static int ncsi_rsp_handler_ev(struct ncsi_request *nr)
/* Check if VLAN mode has been enabled */
ncm = &nc->modes[NCSI_MODE_VLAN];
if (ncm->enable)
- return -EBUSY;
+ return 0;
/* Update to VLAN mode */
cmd = (struct ncsi_cmd_ev_pkt *)skb_network_header(nr->cmd);
@@ -409,7 +409,7 @@ static int ncsi_rsp_handler_dv(struct ncsi_request *nr)
/* Check if VLAN mode has been enabled */
ncm = &nc->modes[NCSI_MODE_VLAN];
if (!ncm->enable)
- return -EBUSY;
+ return 0;
/* Update to VLAN mode */
ncm->enable = 0;
@@ -455,13 +455,10 @@ static int ncsi_rsp_handler_sma(struct ncsi_request *nr)
bitmap = &ncf->bitmap;
if (cmd->at_e & 0x1) {
- if (test_and_set_bit(cmd->index, bitmap))
- return -EBUSY;
+ set_bit(cmd->index, bitmap);
memcpy(ncf->data + 6 * cmd->index, cmd->mac, 6);
} else {
- if (!test_and_clear_bit(cmd->index, bitmap))
- return -EBUSY;
-
+ clear_bit(cmd->index, bitmap);
memset(ncf->data + 6 * cmd->index, 0, 6);
}
@@ -485,7 +482,7 @@ static int ncsi_rsp_handler_ebf(struct ncsi_request *nr)
/* Check if broadcast filter has been enabled */
ncm = &nc->modes[NCSI_MODE_BC];
if (ncm->enable)
- return -EBUSY;
+ return 0;
/* Update to broadcast filter mode */
cmd = (struct ncsi_cmd_ebf_pkt *)skb_network_header(nr->cmd);
@@ -511,7 +508,7 @@ static int ncsi_rsp_handler_dbf(struct ncsi_request *nr)
/* Check if broadcast filter isn't enabled */
ncm = &nc->modes[NCSI_MODE_BC];
if (!ncm->enable)
- return -EBUSY;
+ return 0;
/* Update to broadcast filter mode */
ncm->enable = 0;
@@ -538,7 +535,7 @@ static int ncsi_rsp_handler_egmf(struct ncsi_request *nr)
/* Check if multicast filter has been enabled */
ncm = &nc->modes[NCSI_MODE_MC];
if (ncm->enable)
- return -EBUSY;
+ return 0;
/* Update to multicast filter mode */
cmd = (struct ncsi_cmd_egmf_pkt *)skb_network_header(nr->cmd);
@@ -564,7 +561,7 @@ static int ncsi_rsp_handler_dgmf(struct ncsi_request *nr)
/* Check if multicast filter has been enabled */
ncm = &nc->modes[NCSI_MODE_MC];
if (!ncm->enable)
- return -EBUSY;
+ return 0;
/* Update to multicast filter mode */
ncm->enable = 0;
@@ -591,7 +588,7 @@ static int ncsi_rsp_handler_snfc(struct ncsi_request *nr)
/* Check if flow control has been enabled */
ncm = &nc->modes[NCSI_MODE_FC];
if (ncm->enable)
- return -EBUSY;
+ return 0;
/* Update to flow control mode */
cmd = (struct ncsi_cmd_snfc_pkt *)skb_network_header(nr->cmd);
--
2.14.3
next prev parent reply other threads:[~2017-11-08 5:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-08 5:30 [PATCH net-next 1/2] net/ncsi: Improve general state logging Samuel Mendoza-Jonas
2017-11-08 5:30 ` Samuel Mendoza-Jonas [this message]
2017-11-11 6:10 ` [PATCH net-next 2/2] net/ncsi: Don't return error on normal response David Miller
2017-11-11 6:10 ` [PATCH net-next 1/2] net/ncsi: Improve general state logging David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171108053045.1961-2-sam@mendozajonas.com \
--to=sam@mendozajonas.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).